Find the support reactions at A and C (As shown in the figure,A is a pin support,C is a roller support).(Note:Ignore the depth of the beam) 300 mmProblem 5:(a) Replace the loading acting on the beam by an equivalent resultant force FR and couple moment (MR)c at point C.(b) This time replace the loading on the beam by an equivalent resultant force only (FR =?) and specify where thisforce acts, measured from C (x'=2).(c) Find the support reactions at 4 and C (As shown in the figure, A is a pin support, C is a roller support).(Note: Ignore the depth of the beam)30 kN/m20 kN15KN/m50 kNm2.0 m+ 1.0 m1.5 mProblem 6: Replace the given loading system by an equivalent resultant force and specify where the resultant's line ofaction intersects the member AB measured from A.10m2.0 m

Answered: Image /qna-images/answer/a81afb3b-8fd0-4e53-9016-577b98d9d950.jpg

Specily where th (c) Find the support reactions at A and C (As shown in the figure, A is a pin support, C is a roller support). (Note: Ignore the depth of the beam) 30 kN/m 20 kN 15 kN/m 50 kNm D. 2.0 m - 1.0 m 1.5 m

Specily where th (c) Find the support reactions at A and C (As shown in the figure, A is a pin support, C is a roller support). (Note: Ignore the depth of the beam) 30 kN/m 20 kN 15 kN/m 50 kNm D. 2.0 m - 1.0 m 1.5 m

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter4: Shear Forces And Bending Moments

Section: Chapter Questions

Problem 4.5.20P: The three beams in the figure have the same loading. However, one has a moment release just to the...

See similar textbooks

Related questions

Q: Q- 3. For the given structure below; considering W = 120N &L= 120 cm; a. Draw the Free Body Diagram…

Q: 6- Find Aa/As for fig. shown below when the steel rod and aluminum carried a concrete slab and the…

A: Given: Es (steel)=200 GPaEa (aluminium)=70 GPaLs=3 mLa=6 m

Q: Anchor of the beam given in the figure is built-in support, B point is movable support and G joint.…

A: Let the reactions at fixed support 'A' be: RAH , RAV , MA. Let the reactions at pin joint 'G' be:…

Q: A plane truss has a pin support at A and a roller support at E(see figure).(a) Find reactions at all…

A: The free-body diagram of the provided truss is drawn below.

Q: For the beam in the figure that has as data: P = 24 kN, w = 12 kN /m and L = 8 m, El = cte. Applying…

A: According to the given details in the question. P = 24kN , E = 200 GPa = 200x106 kN/m2 , I = 5x108…

Q: A simply supported beam which has 16 mm height and 8 mm thickness is supported by pin at A and…

Q: The constructed shear force diagram (SFD) for the simply supported beam with a Triangle distributed…

Q: B Support reactions will be found in the gerber beam whose loading condition is given in the figure.…

Q: Find the support reactions and joint force of the construction, shown on the figure, if: q3D24 kN/m,…

Q: The cantilever beam in the figure has a fixed support at A and is under the actions of a uniformly…

Q: Determine the value of reactions at the supports A & B. see Figure2. Figure 2 15 KN/m 1ORN/mM A, 4m…

A: Given: A uniform varying load is applied om simply supported beam The maximum intensity of uniform…

Q: Two identical rollers, each of weights W=1000N, are supported by an inclined plane and a vertical…

A: Given, W = 1000 N

Q: Find the external reactions at support A (fix-end) for the beam shown in the figure. 7 kN 4 kN/m 30…

A: Given data: Moment=30 kN.m Need to determine the external reactions at support A.

Q: In the figure, one end of a uniform beam of weight 440 N is hinged to a wall; the other end is…

A: Consider the FBD as shown below.

Q: Segments AB and BC of beam ABC are pin connected a small distance to the right of joint B (sec…

A: Mechanics Of Material

Q: 4.3-20 A space truss is supported at O, A, D, and C (see figure). Loads P are applied in the y…

Q: A flanged wooden shape is used to support the loads shown on the beam. The dimensions of the shape…

A: Answer: (a) The maximum tension bending stress is 1530.2124 psi. (b) The maximum compression bending…

Q: or the beam shown in fig and then find the reactions at A 18 kN 3 m 3 m 8 kN/m

A: Moment: The moment is the product of the force with perpendicular distance of force from the…

Q: A plane frame has a pin support at A androller supports at C and E (see figure). Frame segmentsABD…

A: Given data as per question UDL applied on the BD =1.5 KN/m The horizontal force applied at point B…

Q: Draw (FBD) and calculate the support reactions in the simply support beam ABCD below 3kN 5kN bo 60°…

Q: In the figure, one end of a uniform beam of weight 340 N is hinged to a wall; the other end is…

Q: A rigid beam of negligible weight is supported by a hinge at A and a rocker at B as shown in the…

A: Given:F=16 KN

Q: B 芝 9 KN 5m 3 m 3 m 60° In the figure shown, connections at A, B, and C are pin joints. a) Draw the…

Q: A bar AB having a length L and axial rigidityEA is fixed at end A (see figure). At the other end,a…

A: The elongation in the bar due to axially applied tensile force can be calculated using the formula…

Q: Figure Y shows a rigid body consisting of beam ABC loaded with a 500 Nm moment, a box with a weight…

A: Given Data, Moment, M = 500 Nm(clockwise) Weight of the box,W = 600 N Mass of the tyre, m= 10 Kg To…

Q: The support member as shown in Figure 2 is designed for beam structure in one of the housing…

Q: A 15,000 N crane pivots around a friction-free axle at its base and is supported by a cable making a…

A: a.

Q: A beam (AB) is attached to a roller at A and a pin at B. It is subjected to three concentrated…

A: Given data beam (AB) is attached to a roller at A and a pin at B. It is subjected to three…

Q: Calculate the vertical external reaction at the hinge support shown in the figure below. 30 kN 45…

Q: a) What is a truss? Explain shortly in your own words, and illustrate with one example. b) For the…

A: Answer (a): Truss: A fixed frame of members which is used to support something (roof, bridge) is…

Q: A 10.7 m long beam is loaded as shown below and the hinge support is at x-2.4 distance from the left…

Q: A G Support reactions will be found in the gerber beam whose loading condition is given in the…

Q: Analyze and find all reactions at supports due to a vertical settlement of (5 cm) at point (C) for…

Q: Example 4.2. A beam 3 m long weighing 400 N is suspended in a horizontal position by two vertical…

A: Given data: Length of the beam (L) = 3 m Weight of the beam = 400 N Weight of the body = 200 N Need…

Q: Segments AB and BC of beam ABC arepin connected a small distance tothe right ofjoint B (sec figure).…

A: Strength Of Material

Q: Find the external reactions at supports A (hinge) and B (roller) for the beam shown in the figure.…

A: To find: The external reaction supports A and B. FBD: The free body diagram shown below:

Q: Current Attempt in Progress Calculate the support reactions at A and B for the loaded beam. Assume…

Q: The truss shown in the figure below is supported on roller at A and a hinge at B. Solve for the |…

Q: Consider the truss shown in the figure below. Calculate the reaction of the roller support at point…

A: Taking moment about point A B*5=10*10+10*(10+10) B*5=100+200 B*5=300 B=60 lbs

Q: Two identical rollers, each of weights W=1000N, are supported by an inclined plane and a vertical…

Q: Q5/ A rectangle RC beam is reinforced with 5 Ø16mm in the tension zone as shown in Figure 4. Check…

Q: Calculate the support reaction(s) at A and B for the beam loaded as shown. Show the direction of the…

Q: A flanged wooden shape is used to support the loads shown on the beam. The dimensions of the shape…

A: Given Data: Length of the beam, L=16 ft

Q: Bonus problem) Analyze the following frame degrees of freedom. Find reactions and finally, ustant…

A: 1 Free BMDBMAB(Maximum)=WL4=12×124=36kip.ftBMBCMaximum=Wl28=3×1228=54kip.ft2Area of BMDFor span…

Q: Problem 4.6 Consider the uniform, horizontal cantilever beam shown in Fig. 4.54. The beam is fixed…

Q: B 1.5 0.5 0.5 (14 kN) (s0 kN)

Q: Determine the reaction of the supports in the figure below.

A: As per the given figure point, C is the internal hinge. So divide the beam in two parts from the…

Q: H.W. 4 / Find the reactions of the simply supported beam shown in Figure below 50 kN 30 KN/m Int.…

A: As per our guideline we suppose to answer only one question. Kindly repost other questions as a…

Q: A beam (AB) is attached to a roller at A and a pin at B. It is subjected to three concentrated…

Q: . A homogeneous rod of constant cross section is attached to unyielding supports. It carries an…

Concept explainers

Axial Load

When a bar of the uniform cross-section is acted by a load, such that the load acts along the longitudinal axis of the bar, such kinds of loadings are known as axial loadings. In general terms, a load is an external force acting on a component. An axial load acts perpendicular to the geometric cross-section of the component. Based on the direction of the application of the load, an axial load can be tensile or compressive. The analysis of bodies under the action of axial loads is generally studied under the branch of mechanics, known as statics.

Question

Find the support reactions at A and C (As shown in the figure,A is a pin support,C is a roller support).(Note:Ignore the depth of the beam)

300 mm
Problem 5:
(a) Replace the loading acting on the beam by an equivalent resultant force FR and couple moment (MR)c at point C.
(b) This time replace the loading on the beam by an equivalent resultant force only (FR =?) and specify where this
force acts, measured from C (x'=2).
(c) Find the support reactions at 4 and C (As shown in the figure, A is a pin support, C is a roller support).
(Note: Ignore the depth of the beam)
30 kN/m
20 kN
15KN/m
50 kNm
2.0 m
+ 1.0 m
1.5 m
Problem 6: Replace the given loading system by an equivalent resultant force and specify where the resultant's line of
action intersects the member AB measured from A.
10m
2.0 m

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1 Free Body Diagram

VIEW

Step 2 Calculation

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A cable with force P is attached to a frame at A and runs over a frictionless pulley at D. Find expressions for shear force V and moment M at x = LI2 of beam BC.
The simple beam ACE shown in the figure is subjected to a triangular load of maximum intensity q0= 200 lb/ft at a = 8 ft and a concentrated moment M = 400 Ib-ft at A. Draw the shear-force and bending-moment diagrams for this beam, Find the value of distanced that results in the maximum moment occurring at L/2. Draw the shear-force and bending-moment diagrams for this case. Find the value of distance a for which Mmaxis the largest possible value.
At a full d raw, an archer applies a pull of 130 N to the bowstring of the bow shown in the figure. Determine the bending moment at the midpoint of the bow.
Find expressions for shear force V and moment M at v = L/2 of beam AB in structure (a). Express V and M in terms of peak load intensity q0and beam length variable L. Repeat for structure (b) but find Fand M at m id-span of member BC.
A beam ABCD with a vertical arm CE is supported as a simple beam al A and D (see figure part a). A cable passes over a small pulley that is attached to the arm at E. One end of the cable is attached to the beam at point B. (a) What is the force P in the cable if the bending moment in the beam just lo the left of point C is equal numerically to 640 lb-ft? Note: Disregard the widths of the beam and vertical arm and use centerline dimensions when making calculations. (b) Repeat part (a) if a roller support is added at C and a shear release is inserted just left of C (see figure part b).
A simple beam AB supports two connected wheel loads 3P and 2P that are a distance d apart (see figure). The wheels may be placed at any distance x from the left-hand support of the beam. (Assume P = 12 kN, d = 2 m, and 1 = 15 m.) (a) Determine the distance .y that will produce the maximum shear force in the beam, and also determine the maximum shear force Vmax. (b) Determine the distance v that will produce the maximum bending moment in the beam, and also draw the corresponding bending-moment diagram.
The centrifuge shown in the figure rotates in a horizontal plane (the x-y plane) on a smooth surface about the z axis (which is vertical) with an angular acceleration a. Each of the two arms has a weight w per unit length and supports a weight W = 2B/L at its end. Derive formulas for the maximum shear force and maximum bending moment in the arms, assuming b = L/9 and c = L/10.
The beam ABC shown in the figure is simply supported at A and B and has an overhang from B to C. The loads consist of a horizontal force P1= 4,0 kN acting at the end of a vertical arm and a vertical force P2= 8.0 kN acting at the end of the overhang, Determine the shear force Fand bending moment M at a cross section located 3,0 m from the left-hand support. Note: Disregard the widths of the beam and vertical arm and use centerline dimensions when making calculations, Find the value of load A that results in V = 0 at a cross section located 2.0 m from the left-hand support. If P2= 8.0 kN, find the value of load P1that results in M = 0 at a cross section located 2,0 m from the left-hand support.
Find expressions for shear force V and moment M at mid-span of beam AB in terms of peak load intensity q0and beam length variables a and L Let a = 5L/b.
A beam of length L is designed to support a uniform load of intensity q (see figure). If the supports of the beam are placed at the ends, creating a simple beam, the maximum bending moment in the beam is qL2/8. However, if the supports of the beam are moved symmetrically toward the middle of the beam (as shown), the maximum bending moment is reduced. Determine the distance a between the supports so that the maximum bending moment in the beam has the smallest possible numerical value. Draw the shear-force and bending-moment diagrams for this condition. Repeat part (a) if the uniform load is replaced with a triangularly distributed load with peak intensity q0= q at mid-span (see Fig. b).
Frame ABC has a moment release just left of joint B. Find axial force N, shear force V, and moment M at the top of column AB. Write variables N, V, and M in terms of variables P and L.
The three beams in the figure have the same loading. However, one has a moment release just to the left of C, the second has a shear release just to the right of C, and the third has an axial release just to the left of C. Which beam has the largest maximum moment? First, find support reactions; then plot axial force (N), shear ( V) and moment (M) diagrams for all three beams. Label all critical N, K, and M values and also the distance to points where N, K and loi M are zero.