Vector Mechanics for Engineers: Statics and Dynamics
Vector Mechanics for Engineers: Statics and Dynamics
12th Edition
ISBN: 9781259638091
Author: Ferdinand P. Beer, E. Russell Johnston Jr., David Mazurek, Phillip J. Cornwell, Brian Self
Publisher: McGraw-Hill Education
bartleby

Concept explainers

bartleby

Videos

Question
Book Icon
Chapter 10.1, Problem 10.21P

(a)

To determine

Find the couple M required to maintain the equilibrium.

(a)

Expert Solution
Check Mark

Answer to Problem 10.21P

The magnitude of the couple M is 121.8Nm(Counterclockwise)_.

Explanation of Solution

Given information:

The magnitude of the force P is 4 kN.

The distance between the point A and B is 50 mm.

The distance between the point B and C is 200 mm.

The value of the angle θ=30°.

Calculation:

Show the free-body diagram of the engine system as in Figure 1.

Vector Mechanics for Engineers: Statics and Dynamics, Chapter 10.1, Problem 10.21P

Consider the geometry of the Figure 1.

Use the Law of sines;

ABsinϕ=BCsinθsinϕ=ABBCsinθ (1)

Differentiate the equation;

cosϕδϕ=ABBCcosθδθδϕ=ABBCcosθcosϕδθ

Find the horizontal displacement (xC) at point C using the relation.

xC=ABcosθ+BCcosϕ

Differentiate the equation;

δxC=ABsinθδθBCsinϕδϕ

Substitute ABBCsinθ for sinϕ and ABBCcosθcosϕδθ for δϕ.

δxC=ABsinθδθBC(ABBCsinθ)(ABBCcosθcosϕδθ)=ABsinθδθ(ABsinθ)(ABBCcosθcosϕδθ)

Use the principle of virtual work;

δU=0PδxCMδθ=0

Substitute [ABsinθδθ(ABsinθ)(ABBCcosθcosϕδθ)] for δxC.

P[ABsinθδθ(ABsinθ)(ABBCcosθcosϕδθ)]Mδθ=0P[ABsinθ+(ABsinθ)(ABBCcosθcosϕ)]M=0 (2)

Substitute 50 mm for AB, 200 mm for BC, and 30° for θ in Equation (1).

sinϕ=50200×sin30°ϕ=7.181°

Substitute 4 kN for P, 50 mm for AB, 200 mm for BC, 7.181° for ϕ, and 30° for θ in Equation (2).

4[50sin30°+(50sin30°)(50200cos30°cos7.181°)]M=04[25+25(0.21822)]M=0M=121.8kNmm×1,000N1kN×1m1,000mmM=121.8Nm(Counterclockwise)

Therefore, the magnitude of the couple M is 121.8Nm(Counterclockwise)_.

(b)

To determine

Find the couple M required to maintain the equilibrium.

(b)

Expert Solution
Check Mark

Answer to Problem 10.21P

The magnitude of the couple M is 78.2Nm(Counterclockwise)_.

Explanation of Solution

Given information:

The magnitude of the force P is 4 kN.

The distance between the point A and B is 50 mm.

The distance between the point B and C is 200 mm.

The value of the angle θ=150°.

Calculation:

Refer part (a) for calculation;

Substitute 50 mm for AB, 200 mm for BC, and 150° for θ in Equation (1).

sinϕ=50200×sin150°ϕ=7.181°

Substitute 4 kN for P, 50 mm for AB, 200 mm for BC, 7.181° for ϕ, and 150° for θ in Equation (2).

4[50sin150°+(50sin150°)(50200cos150°cos7.181°)]M=04[2525(0.21822)]M=0M=78.2kNmm×1,000N1kN×1m1,000mmM=78.2Nm(Counterclockwise)

Therefore, the magnitude of the couple M is 78.2Nm(Counterclockwise)_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
Problem # 8: The five forces acting at the end of the boom satisfy the condition of equilibrium. Determine the values of T_{1} and T_{2} .
Solve Prob. 10.108 assuming that the 24-lb load is applied at C instead of E.(Reference to Problem 10.108):Two identical rods ABC and DBE are connected by a pin at B and by a spring CE . Knowing that the spring is 4 in. long when unstretched and that the constant of the spring is 8 lb/in., determine the distance x corresponding to equilibrium when a 24-lb load is applied at E as shown.
Two rods of negligible weight are attached to drums of radius r that are connected by a belt and spring of constant k . Knowing that the spring is undeformed when the rods are vertical, determine the range of values of P for which the equilibrium position 01=02 =0 = 0 is stable.

Chapter 10 Solutions

Vector Mechanics for Engineers: Statics and Dynamics

Ch. 10.1 - Solve Prob. 10.10, assuming that the force P...Ch. 10.1 - Prob. 10.12PCh. 10.1 - Prob. 10.13PCh. 10.1 - Prob. 10.14PCh. 10.1 - Prob. 10.15PCh. 10.1 - 10.15 and 10.16 Derive an expression for the...Ch. 10.1 - Prob. 10.17PCh. 10.1 - Prob. 10.18PCh. 10.1 - Prob. 10.19PCh. 10.1 - Prob. 10.20PCh. 10.1 - Prob. 10.21PCh. 10.1 - A couple M with a magnitude of 100 Nm isapplied as...Ch. 10.1 - Rod AB is attached to a block at A that can...Ch. 10.1 - Solve Prob. 10.23, assuming that the 800-N force...Ch. 10.1 - In Prob. 10.9, knowing that a = 42 in., b = 28...Ch. 10.1 - Determine the value of corresponding to...Ch. 10.1 - Prob. 10.27PCh. 10.1 - Determine the value of corresponding to...Ch. 10.1 - Prob. 10.29PCh. 10.1 - Two rods AC and CE are connected by a pin at Cand...Ch. 10.1 - Solve Prob. 10.30 assuming that force P is movedto...Ch. 10.1 - Prob. 10.32PCh. 10.1 - Prob. 10.33PCh. 10.1 - Prob. 10.34PCh. 10.1 - Prob. 10.35PCh. 10.1 - Prob. 10.36PCh. 10.1 - Prob. 10.37PCh. 10.1 - Prob. 10.38PCh. 10.1 - Prob. 10.39PCh. 10.1 - Prob. 10.40PCh. 10.1 - Prob. 10.41PCh. 10.1 - The position of boom ABC is controlled by...Ch. 10.1 - Prob. 10.43PCh. 10.1 - Prob. 10.44PCh. 10.1 - Prob. 10.45PCh. 10.1 - Prob. 10.46PCh. 10.1 - Denoting the coefficient of static friction...Ch. 10.1 - Prob. 10.48PCh. 10.1 - Prob. 10.49PCh. 10.1 - Prob. 10.50PCh. 10.1 - Prob. 10.51PCh. 10.1 - Prob. 10.52PCh. 10.1 - Prob. 10.53PCh. 10.1 - Prob. 10.54PCh. 10.1 - Prob. 10.55PCh. 10.1 - Prob. 10.56PCh. 10.1 - Prob. 10.57PCh. 10.1 - Determine the horizontal movement of joint C if...Ch. 10.2 - Using the method of Sec. 10.2C, solve Prob. 10.29....Ch. 10.2 - Prob. 10.60PCh. 10.2 - Prob. 10.61PCh. 10.2 - Prob. 10.62PCh. 10.2 - Prob. 10.63PCh. 10.2 - Prob. 10.64PCh. 10.2 - Prob. 10.65PCh. 10.2 - Using the method of Sec. 10.2C, solve Prob. 10.38....Ch. 10.2 - Prob. 10.67PCh. 10.2 - Prob. 10.68PCh. 10.2 - Prob. 10.69PCh. 10.2 - Prob. 10.70PCh. 10.2 - Prob. 10.71PCh. 10.2 - Prob. 10.72PCh. 10.2 - Prob. 10.73PCh. 10.2 - Prob. 10.74PCh. 10.2 - A load W of magnitude 144 lb is applied to...Ch. 10.2 - Solve Prob. 10.75, assuming that the spring...Ch. 10.2 - Bar ABC is attached to collars A and B that...Ch. 10.2 - Solve Prob. 10.77, assuming that the spring...Ch. 10.2 - Prob. 10.79PCh. 10.2 - Prob. 10.80PCh. 10.2 - Prob. 10.81PCh. 10.2 - A spring AB of constant k is attached to two...Ch. 10.2 - Prob. 10.83PCh. 10.2 - Prob. 10.84PCh. 10.2 - Prob. 10.85PCh. 10.2 - Prob. 10.86PCh. 10.2 - Prob. 10.87PCh. 10.2 - Prob. 10.88PCh. 10.2 - Prob. 10.89PCh. 10.2 - Prob. 10.90PCh. 10.2 - Prob. 10.91PCh. 10.2 - Prob. 10.92PCh. 10.2 - Prob. 10.93PCh. 10.2 - Prob. 10.94PCh. 10.2 - Prob. 10.95PCh. 10.2 - Prob. 10.96PCh. 10.2 - Bars AB and BC, each with a length l and of...Ch. 10.2 - Solve Prob. 10.97 knowing that l = 30 in. and k =...Ch. 10.2 - Bars AB and CD, each of length l and of negligible...Ch. 10.2 - Solve Prob. 10.99, assuming that the vertical...Ch. 10 - Determine the vertical force P that must be...Ch. 10 - Determine the couple M that must be applied...Ch. 10 - Prob. 10.103RPCh. 10 - Prob. 10.104RPCh. 10 - Prob. 10.105RPCh. 10 - Prob. 10.106RPCh. 10 - Prob. 10.107RPCh. 10 - Prob. 10.108RPCh. 10 - Prob. 10.109RPCh. 10 - Prob. 10.110RPCh. 10 - Prob. 10.111RPCh. 10 - Prob. 10.112RP
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Introduction to Undamped Free Vibration of SDOF (1/2) - Structural Dynamics; Author: structurefree;https://www.youtube.com/watch?v=BkgzEdDlU78;License: Standard Youtube License