Thermodynamics: An Engineering Approach
Thermodynamics: An Engineering Approach
9th Edition
ISBN: 9781259822674
Author: Yunus A. Cengel Dr., Michael A. Boles
Publisher: McGraw-Hill Education
bartleby

Concept explainers

bartleby

Videos

Question
Book Icon
Chapter 13.3, Problem 73P

a)

To determine

The total entropy change and exergy destruction by treating the mixture as an ideal gas.

a)

Expert Solution
Check Mark

Answer to Problem 73P

The entropy generated is 8.496kJ/K.

The energy destroyed is 2489kJ.

Explanation of Solution

Write the entropy balance equation to obtain the expression of entropy generation in terms of H2andN2.

SinSout+Sgen=ΔSsystemQinTb,surr+Sgen=m(s2s1)Sgen=m(s2s1)+QinTsurrSgen=mH2(s2s1)H2+mN2(s2s1)N2QinTsurrSgen=ΔSH2+ΔSN2QinTsurr (I)

Here, mass of H2 is mH2, mass of N2 is mN2, boundary temperature is Tb,surr, surrounding temperature is Tsurr, entropy at state 1 and 2 is s1ands2, entropy generation is Sgen, heat input is Qin, outlet entropy is Sout, and inlet entropy is Sin.

Write the expression to obtain the energy destroyed during a process (Xdestroyed).

Xdestroyed=T0Sgen (II)

Here, initial temperature is T0.

Conclusion:

Refer Table A-2b, “Ideal gas specific heats of various common gases”, obtain the specific heat at constant pressure of H2andN2 at 200K and 160K as, 13.6kJ/kgK and 1.039kJ/kgK respectively.

From Equation (I) obtain the value of (s2s1)H2.

(s2s1)H2=mH2(cplnT2T1RlnP20P1)H2 (III)

The partial pressure of H2 gas remains constant in the total mixture pressure, thus calculate (s2s1)H2 from Equation (III).

(s2s1)H2=mH2(cplnT2T1)H2ΔSH2=mH2(cplnT2T1)H2 (IV)

Here, constant pressure specific heat is cp, initial temperature and pressure is T1andP1, and apparent gas constant is R,

Substitute 6 kg for mH2, 13.60kJ/kgK for cp, 200 K for T2, and 160 K for T1 in Equation (IV).

ΔSH2=6kg((13.60kJ/kgK)ln200K160K)=18.21kJ/K

From Equation (I) obtain the value of (s2s1)N2.

(s2s1)N2=mN2(cplnT2T1RlnP20P1)N2 (V)

The partial pressure of N2 gas remains constant in the total mixture pressure, thus calculate (s2s1)N2 from Equation (V).

(s2s1)N2=mN2(cplnT2T1)N2ΔSN2=mN2(cplnT2T1)N2 (VI)

Substitute 21kg for mN2, 1.039kJ/kgK for cp, 200 K for T2, 160 K for T1 in Equation (VI).

ΔSN2=21kg((1.039kJ/kgK)ln200K160K)=4.87kJ/K

Substitute 18.21kJ/K for ΔSH2, 4.87kJ/K for ΔSN2, 4273 kJ for Qin and 293 K for Tsurr in Equation (I).

Sgen=(18.21kJ/K)+(4.87kJ/K)4273kJ293K=8.496kJ/K

Thus, the entropy generated is 8.496kJ/K.

Substitute 293 K for T0 and 8.496kJ/K for Sgen in Equation (II).

Xdestroyed=(293K)(8.496kJ/K)=2489kJ

Thus, the energy destroyed is 2489kJ.

b)

To determine

The total entropy change and exergy destruction by treating the mixture as a non ideal gas using Amagat’s law.

b)

Expert Solution
Check Mark

Answer to Problem 73P

The entropy generation is 9.390kJ/K.

The energy destroyed is 2,751kJ.

Explanation of Solution

Write the expression to obtain the initial reduced temperature of H2 (TR1,H2).

TR1,H2=Tm,1Tcr,H2 (VII)

Here, critical temperature of H2 is Tcr,H2.

Write the expression to obtain the initial and final reduced pressure of H2 (PR1,H2).

PR1,H2=PR2,H2=PmPcr,H2 (VIII)

Here, critical temperature of H2 is Pcr,H2.

Write the expression to obtain the final reduced temperature of H2 (TR2,H2).

TR2,H2=Tm,2Tcr,H2 (IX)

Here, critical temperature of H2 is Tcr,H2.

Write the expression to obtain the initial reduced temperature of N2 (TR1,N2).

TR1,N2=Tm,1Tcr,N2 (X)

Here, critical temperature of N2 is Tcr,N2.

Write the expression to obtain the initial and final reduced pressure of N2 (PR1,N2).

PR1,N2=PR2,N2=PmPcr,N2 (XI)

Here, critical temperature of N2 is Pcr,N2.

Write the expression to obtain the final reduced temperature of N2 (TR2,N2).

TR2,N2=Tm,2Tcr,N2 (XII)

Here, critical temperature of N2 is Tcr,N2.

Write the expression to obtain the entropy change for H2 (ΔSH2).

ΔSH2=ΔSH2,ideal (XIII)

Write the expression to obtain the entropy change for N2 (ΔSN2).

ΔSN2=NN2Ru(Zs1Zs2)+ΔSN2,ideal (XIV)

Here, number of moles of N2 is NN2, and universal gas constant is Ru.

Write the expression to obtain the surrounding entropy change (ΔSsurr).

ΔSsurr=QsurrT0 (XV)

Here, surrounding heat is Qsurr.

Write the expression to obtain the entropy generation (Sgen).

Sgen=ΔSH2+ΔSN2+ΔSsurr (XVI)

Write the expression to obtain the energy destroyed during a process (Xdestroyed).

Xdestroyed=T0Sgen (XVII)

Here, initial temperature is T0.

Conclusion:

Substitute 160 K for Tm,1 and 33.3 K for Tcr,H2 in Equation (VII).

TR1,H2=160K33.3K=4.805

Substitute 5 MPa for Pm and 1.30 MPa for Pcr,H2 in Equation (VIII).

PR,H2=5MPa1.30MPa=3.846

Substitute 200 K for Tm,2 and 33.3 K for Tcr,H2 in Equation (IX).

TR2,H2=200K33.3K=6.006

Refer Figure A-30, “Generalized entropy departure chart”, obtain the value of Zs1 and Zs2 for H2 as 1 and 1 by taking TR1,H2 as 4.805, PR1,H2 as 3.846, and TR2,H2 as 6.006.

Substitute 160 K for Tm,1 and 126.2 K for Tcr,N2 in Equation (X).

TR1,N2=160K126.2K=1.268

Substitute 5 MPa for Pm and 3.39 MPa for Pcr,N2 in Equation (XI).

PR,N2=5MPa3.39MPa=1.475

Substitute 200 K for Tm,2 and 126.2 K for Tcr,N2 in Equation (XII).

TR2,N2=200K126.2K=1.585

Refer Figure A-30, “Generalized entropy departure chart”, obtain the value of Zs1 and Zs2 for N2 as 0.8 and 0.4 by taking TR1,N2 as 1.268, PR1,N2 as 1.475 and TR2,N2 as 1.585.

Substitute 18.21kJ/K for ΔSH2,ideal in Equation (XIII).

ΔSH2=18.21kJ/K

Substitute 0.75 kmol for NN2, 8.314kPam3/kmolK for Ru, 0.8 for Zs1, 0.4 for Zs2, and 4.87kJ/K for ΔSN2,ideal in Equation (XIV).

ΔSN2=0.75kmol(8.314kPam3/kmolK)(0.80.4)+4.87kJ/K=7.37kJ/K

Substitute –4,745 kJ for Qsurr and 293 K for T0 in Equation (XV).

ΔSsurr=4,745kJ293K=16.19kJ/K

Substitute 7.37kJ/K for ΔSN2, 18.21kJ/K for ΔSH2, and 16.19kJ/K for ΔSsurr in Equation (XVI).

Sgen=18.21kJ/K+7.37kJ/K16.19kJ/K=9.390kJ/K

Thus, the entropy generation is 9.390kJ/K.

Substitute 293 K for T0 and 9.390kJ/K for Sgen in Equation (XVII).

Xdestroyed=(293K)(9.390kJ/K)=2751kJ

Thus, the energy destroyed is 2751kJ.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
Determine the temperature change undergone by an air as an ideal gas whenexpanding in the turbine adiabatically and irreversibly through a pressure ratio of 5 from an initial pressure of 700 kPa and temperature of 727°C according to the law pv'? =C. Assume Cp = 1.0035 kJ/kg.K and k = 1.4.
What is entropy and its application?
How did the ideal gas laws apply in internal combustion engines?

Chapter 13 Solutions

Thermodynamics: An Engineering Approach

Ch. 13.3 - A gas mixture consists of 20 percent O2, 30...Ch. 13.3 - Prob. 12PCh. 13.3 - Prob. 13PCh. 13.3 - Consider a mixture of two gases A and B. Show that...Ch. 13.3 - Is a mixture of ideal gases also an ideal gas?...Ch. 13.3 - Express Daltons law of additive pressures. Does...Ch. 13.3 - Express Amagats law of additive volumes. Does this...Ch. 13.3 - Prob. 18PCh. 13.3 - How is the P-v-T behavior of a component in an...Ch. 13.3 - Prob. 20PCh. 13.3 - Prob. 21PCh. 13.3 - Prob. 22PCh. 13.3 - Consider a rigid tank that contains a mixture of...Ch. 13.3 - Prob. 24PCh. 13.3 - Is this statement correct? The temperature of an...Ch. 13.3 - Is this statement correct? The volume of an...Ch. 13.3 - Is this statement correct? The pressure of an...Ch. 13.3 - A gas mixture at 300 K and 200 kPa consists of 1...Ch. 13.3 - Prob. 29PCh. 13.3 - Separation units often use membranes, absorbers,...Ch. 13.3 - Prob. 31PCh. 13.3 - The mass fractions of a mixture of gases are 15...Ch. 13.3 - The volumetric analysis of a mixture of gases is...Ch. 13.3 - An engineer has proposed mixing extra oxygen with...Ch. 13.3 - A rigid tank contains 0.5 kmol of Ar and 2 kmol of...Ch. 13.3 - A mixture of gases consists of 0.9 kg of oxygen,...Ch. 13.3 - Prob. 37PCh. 13.3 - One pound-mass of a gas whose density is 0.001...Ch. 13.3 - A 30 percent (by mass) ethane and 70 percent...Ch. 13.3 - Prob. 40PCh. 13.3 - Prob. 41PCh. 13.3 - A rigid tank that contains 2 kg of N2 at 25C and...Ch. 13.3 - Prob. 43PCh. 13.3 - Prob. 44PCh. 13.3 - Prob. 45PCh. 13.3 - Is the total internal energy of an ideal-gas...Ch. 13.3 - Prob. 47PCh. 13.3 - Prob. 48PCh. 13.3 - Prob. 49PCh. 13.3 - Prob. 50PCh. 13.3 - The volumetric analysis of a mixture of gases is...Ch. 13.3 - A mixture of nitrogen and carbon dioxide has a...Ch. 13.3 - The mass fractions of a mixture of gases are 15...Ch. 13.3 - A mixture of gases consists of 0.1 kg of oxygen, 1...Ch. 13.3 - An insulated tank that contains 1 kg of O2at 15C...Ch. 13.3 - An insulated rigid tank is divided into two...Ch. 13.3 - Prob. 59PCh. 13.3 - A mixture of 65 percent N2 and 35 percent CO2...Ch. 13.3 - Prob. 62PCh. 13.3 - Prob. 63PCh. 13.3 - Prob. 66PCh. 13.3 - Prob. 67PCh. 13.3 - Prob. 68PCh. 13.3 - Prob. 69PCh. 13.3 - The gas passing through the turbine of a simple...Ch. 13.3 - Prob. 71PCh. 13.3 - A pistoncylinder device contains 6 kg of H2 and 21...Ch. 13.3 - Prob. 73PCh. 13.3 - Prob. 74PCh. 13.3 - Prob. 75PCh. 13.3 - Prob. 76PCh. 13.3 - Prob. 77PCh. 13.3 - Prob. 78PCh. 13.3 - Prob. 79PCh. 13.3 - Prob. 81PCh. 13.3 - Fresh water is obtained from seawater at a rate of...Ch. 13.3 - Is it possible for an adiabatic liquid-vapor...Ch. 13.3 - Prob. 84PCh. 13.3 - Prob. 85RPCh. 13.3 - The products of combustion of a hydrocarbon fuel...Ch. 13.3 - A mixture of gases is assembled by first filling...Ch. 13.3 - Prob. 90RPCh. 13.3 - Prob. 91RPCh. 13.3 - Prob. 92RPCh. 13.3 - A rigid tank contains a mixture of 4 kg of He and...Ch. 13.3 - A spring-loaded pistoncylinder device contains a...Ch. 13.3 - Prob. 95RPCh. 13.3 - Reconsider Prob. 1395. Calculate the total work...Ch. 13.3 - Prob. 97RPCh. 13.3 - Prob. 100RPCh. 13.3 - Prob. 101RPCh. 13.3 - Prob. 102FEPCh. 13.3 - An ideal-gas mixture whose apparent molar mass is...Ch. 13.3 - An ideal-gas mixture consists of 2 kmol of N2and 4...Ch. 13.3 - Prob. 105FEPCh. 13.3 - Prob. 106FEPCh. 13.3 - An ideal-gas mixture consists of 3 kg of Ar and 6...Ch. 13.3 - Prob. 108FEPCh. 13.3 - Prob. 109FEPCh. 13.3 - Prob. 110FEPCh. 13.3 - Prob. 111FEP
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
First Law of Thermodynamics, Basic Introduction - Internal Energy, Heat and Work - Chemistry; Author: The Organic Chemistry Tutor;https://www.youtube.com/watch?v=NyOYW07-L5g;License: Standard youtube license