Thermodynamics: An Engineering Approach
Thermodynamics: An Engineering Approach
9th Edition
ISBN: 9781259822674
Author: Yunus A. Cengel Dr., Michael A. Boles
Publisher: McGraw-Hill Education
bartleby

Videos

Textbook Question
Book Icon
Chapter 15.7, Problem 113RP

Repeat Prob. 15–112 using a coal from Utah that has an ultimate analysis (by mass) of 61.40 percent C, 5.79 percent H2, 25.31 percent O2, 1.09 percent N2, 1.41 percent S, and 5.00 percent ash (noncombustibles).

(a)

Expert Solution
Check Mark
To determine

The amount of steam generated per unit of fuel mass burned.

Answer to Problem 113RP

The amount of steam generated per unit of fuel mass burned is 10.87kgsteam/kgfuel_.

Explanation of Solution

Express the number of moles of carbon.

NC=mCMC (I)

Here, molar mass of carbon is MC and the mass of the carbon is mC.

Express the number of moles of hydrogen.

NH2=mH2MH2 (II)

Here, molar mass of hydrogen is MH2 and the mass of the hydrogen is mH2.

Express the number of moles of oxygen.

NO2=mO2MO2 (III)

Here, molar mass of oxygen is MO2 and the mass of the oxygen is mO2.

Express the number of moles of nitrogen.

NN2=mN2MN2 (IV)

Here, molar mass of nitrogen is MN2 and the mass of the nitrogen is mN2.

Express the number of moles of sulphur.

NS=mSMS (V)

Here, molar mass of sulphur is MS and the mass of the sulphur is mS.

Express the total number of moles.

Nm=NC+NH2+NO2+NN2+NS (VI)

Express the mole fraction of carbon.

yC=NCNm (VII)

Express the mole fraction of hydrogen.

yH2=NH2Nm (VIII)

Express the mole fraction of oxygen.

yO2=NO2Nm (IX)

Express the mole fraction of nitrogen.

yN2=NN2Nm (X)

Express the mole fraction of sulphur.

yS=NSNm (XI)

Write the energy balance equation using steady-flow equation.

EinEout=ΔEsystem (XII)

Here, the total energy entering the system is Ein, the total energy leaving the system is Eout, and the change in the total energy of the system is ΔEsystem.

Substitute 0 for Ein, Qout for Eout, and ΔU for ΔEsystem in Equation (XII)

(0)Qout=ΔUQout=NP(h¯f°+h¯h¯°)PNR(h¯f°+h¯h¯°)RQout=NP(h¯f°+h¯500Kh¯298K°)PNR(h¯f°)R (XIII)

Here, the enthalpy of formation for product is h¯f,P°, the enthalpy of formation for reactant is h¯f,R°, the mole number of the product is NP, and the mole number of the reactant is NR.

Write the formula for the amount of steam generated per unit mass of fuel burned.

msmf=QoutΔhs=Qouthfhg (XIV)

Here, the mass of the steam is ms, the mass of the fuel burned is mf, and the change in the enthalpy of the steam.

Conclusion:

Refer Table A-1, “molar mass, gas constant, and the critical point properties”, and write the molar masses.

MC=12kg/kmolMH2=2kg/kmolMO2=32kg/kmolMS=32kg/kmol

Mair=29kg/kmolMN2=28kg/kmol

Here, molar mass of air is Mair.

Substitute 61.40kg for mC and 12kg/kmol for MC in Equation (I).

NC=61.40kg12kg/kmol=5.117kmol

Substitute 5.79kg for mH2 and 2kg/kmol for MH2 in Equation (II).

NH2=5.79kg2kg/kmol=2.895kmol

Substitute 25.31kg for mO2 and 32kg/kmol for MO2 in Equation (III).

NO2=25.31kg32kg/kmol=0.7909kmol

Substitute 1.09kg for mN2 and 28kg/kmol for MN2 in Equation (IV).

NN2=1.09kg28kg/kmol=0.03893kmol

Substitute 1.41kg for mS and 32kg/kmol for MS in Equation (V).

NS=1.41kg32kg/kmol=0.04406kmol

Substitute 5.117kmol for NC, 2.895kmol for NH2, 0.7909kmol for NO2, 0.03893kmol for NN2 and 0.04406kmol for NS in Equation (VI).

Nm=5.117kmol+2.895kmol+0.7909kmol+0.03893kmol+0.04406kmol=8.886kmol

Substitute 5.117kmol for NC and 8.886kmol for Nm in Equation (VII).

yC=5.117kmol8.886kmol=0.5758

Substitute 2.895kmol for NH2 and 8.886kmol for Nm in Equation (VIII).

yH2=2.895kmol8.886kmol=0.3258

Substitute 0.7909kmol for NO2 and 8.886kmol for Nm in Equation (IX).

yO2=0.7909kmol8.886kmol=0.0890

Substitute 0.03893kmol for NN2 and 8.886kmol for Nm in Equation (X).

yN2=0.03893kmol8.886kmol=0.00438

Substitute 0.04406kmol for NS and 8.886kmol for Nm in Equation (XI).

yS=0.04406kmol8.886kmol=0.00496

Express the combustion equation.

[0.5758C+0.3258H2+0.0890O2+0.00438N2+0.00496S+1.5ath(O2+3.76N2)0.5758CO2+0.3258H2O+0.00496SO2+0.5athO2+0.5ath×3.76N2] (XV)

Here, carbon dioxide, water, sulfur dioxide, nitrogen and oxygen is CO2,H2O,SO2,N2andO2 respectively, and stoichiometric coefficient of air is ath.

Perform the species balancing according to the oxygen balance:

Oxygen balance:

0.0890+1.5ath=0.5758+0.5(0.3258)+0.00496+0.5athath=0.6547

Substitute 0.6547 for ath in Equation (XV).

[0.5758C+0.3258H2+0.0890O2+0.00438N2+0.00496S+1.5(0.6547)(O2+3.76N2)0.5758CO2+0.3258H2O+0.00496SO2+0.5(0.6547)O2+0.5(0.6547)×3.76N2][0.5758C+0.3258H2+0.0890O2+0.00438N2+0.00496S+0.9821(O2+3.76N2)0.5758CO2+0.3258H2O+0.00496SO2+0.3274O2+3.693N2] (XVI)

Calculate the apparent molecular weight of the cool.

Mm=mmNm=(0.5758×12+0.3258×2+0.0890×32+0.00438×28+0.00496×32)kg(0.5758+0.3258+0.0890+0.00438+0.00496)kmol=10.69kg1.0kmol=10.69kg/kmolcoal

Refer Appendix Table A-18, A-19, A-20, and A-23, obtain the enthalpy of formation, at 298 K , and 500 K for O2, N2, H2O, and CO2 is given in a table (I) as:

Substanceh¯f°kJ/kmolh¯298KkJ/kmolh¯500KkJ/kmol
O20868214,770
N20866914,581
H2O(g)-241820990416,828
CO2-393,520936417,678

Substitute the value of substance in Equation (XIII).

Qout=[(0.5758)(393,520kJ/kmol+17,678kJ/kmol9364kJ/kmol)+(0.3258)(241,820kJ/kmol+16,828kJ/kmol9904kJ/kmol)+(0.3274)(0+14,770kJ/kmol8682kJ/kmol)+(3.693)(0+14,581kJ/kmol8669kJ/kmol)(0)]=274,505kJ/kmoloffuel

Calculate the heat loss per unit mass of the fuel.

Qout=274,505kJ/kmolof fuel10.69kg/kmolof fuel=25,679kJ/kgfuel

Substitute 25,679kJ/kgfuel for Qout, 3214.5kJ/kg for hf, and 852.26kJ/kg for hg in Equation (XIV).

msmf=25,679kJ/kgfuel3214.5kJ/kg852.26kJ/kg=25,679kJ/kgfuel2362.24kJ/kgsteam=10.87kgsteam/kgfuel

Thus, the amount of steam generated per unit of fuel mass burned is 10.87kgsteam/kgfuel_.

(b)

Expert Solution
Check Mark
To determine

The change in the exergy of the combustion steams, in kJ/kgfuel.

Answer to Problem 113RP

The change in the exergy of the combustion steams, in kJ/kgfuel is 27,630kJ/kgfuel_.

Explanation of Solution

Write the expression for entropy generation during this process.

Sgen=SPSR+QoutTsurr (XVII)

Write the combustion equation of Equation (VI)

Sgen=SPSR+QoutTsurrSgen=NPs¯PNRs¯R+QoutTsurr (XVIII)

Here, the entropy of the product is s¯P, the entropy of the reactant is s¯R, the heat transfer for C8H18 is Qout, and the surrounding temperature is Tsurr.

Determine the entropy at the partial pressure of the components.

Si=Nis¯i(T,Pi)=Nis¯i°(T,P0)Ruln(yiPm) (XIX).

Here, the partial pressure is Pi, the mole fraction of the component is yi, the total pressure of the mixture is Pm, and the universal gas constant is Ru.

Write the expression for exergy change of the combustion steam is equal to the exergy destruction.

ΔXgases=Xdes=T0Sgen (XX)

Here, the thermodynamic temperature of the surrounding is T0.

Conclusion:

Refer Equation (XIX) for reactant and product to calculation the entropy in tabular form as:

For reactant entropy,

SubstanceNiyi

s¯i°

(T, 1 atm)

Ruln(yiPm)Nis¯i
C0.57580.57585.74-4.5895.95
H20.32580.3258130.68-9.32445.61
O20.08900.0890205.04-20.1120.04
N20.004380.00438191.61-45.151.04
O20.98210.21205.04-12.98214.12
N23.6930.79191.61-1.960714.85
SR=1001.61kJ/K

For product entropy,

SubstanceNiyi

s¯i°

(T, 1 atm)

Ruln(yiPm)Nis¯i
CO20.57580.1170234.814-17.84145.48
H2O(g)0.32580.0662206.413-22.5774.60
O20.32740.0665220.589-22.5479.60
N23.6930.7503206.630-2.388771.90
SP=1071.58kJ/K

Substitute 1071.58kJ/K for SP, 1001.61kJ/K for SR, 298K for Tsurr, and 274,505kJ/kmol for Qout in Equation (XVII).

Sgen=(1071.581001.61)kJ/K+274,505kJ/kmolK298K=(69.97)kJ/K+(921.1577)kJ/kmol=991.1kJ/kmolK

Substitute 991.1kJ/kg for Sgen and 298K for T0 in Equation (XX).

ΔXgases=(298K)×(991.1kJ/kg)=295,347.8kJ/kmolfuel295,348kJ/kmolfuel

Calculate the exergy destruction per unit mass of the basis.

Qout=295,348kJ/kmolof fuel10.69kg/kmolof fuel=27,630kJ/kg

Thus, the change in the exergy of the combustion steams, in kJ/kgfuel is 27,630kJ/kgfuel_.

(c)

Expert Solution
Check Mark
To determine

The exergy change of the steam, in kJ/kgsteam.

Answer to Problem 113RP

The exergy change of the steam, in kJ/kgsteam is 1039kJ/kgsteam_.

Explanation of Solution

Determine the exergy change of the steam stream.

ΔXsteam=ΔhT0Δs=(h2h1)T0(s2s1) (XXI)

Here, the final enthalpy is h2, the initial enthalpy is h1, the final entropy is s2, and the initial entropy is s1.

Conclusion:

Substitute 3214.5kJ/kg for h2, 852.26kJ/kg for h1, 298K for T0, 6.7714kJ/kgK for s2, and 2.3305kJ/kgK for s1 in Equation (XXI).

ΔXsteam=(3214.5852.26)kJ/kg(298K)(6.77142.3305)kJ/kgK=2362.24kJ/kg(298K)×4.4409kJ/kgK=1038.85kJ/kgsteam1039kJ/kgsteam

Thus, the exergy change of the steam, in kJ/kgsteam is 1039kJ/kgsteam_.

(d)

Expert Solution
Check Mark
To determine

The lost work potential, in kJ/kgfuel.

Answer to Problem 113RP

The lost work potential, in kJ/kgfuel is 16,340kJ/kgfuel_.

Explanation of Solution

Determine the lost work potential is the negative of the net exergy change both streams.

Xdest=[msmfΔXsteam+ΔXgases] (XXII)

Conclusion:

Substitute 10.87kgsteam/kgfuel for ms/mf, 1039kJ/kgsteam for ΔXsteam, and 27,630kJ/kgsteam for ΔXgases in Equation (XXII).

Xdest=[(10.87kgsteam/kgfuel)×(1039kJ/kgsteam)+(27,630kJ/kgfuel)]=[(11293.93kJ/kgfuel)+(27,630kJ/kgfuel)]=16336.1kJ/kgfuel16340kJ/kgfuel

Thus, the lost work potential, in kJ/kgfuel is 16,340kJ/kgfuel_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
Using the Clapeyron equation, determine the latent heat of vaporization of saturated Propane. Data: Temperature: 40°F; Pressure: 77.80 psia; Liquid volume: 0.03055 ft3/lbm; Vapor volume: 1.33 ft3/lbm.
Q1) A constant volume tank contain 1 mole of C8H18 and 12 mole of O2 gas at a temperature of 25 °C and 1 bar. The contents of the tank is ignited and C;H14 is burned completely and final products temperature is found to be 1700 K. Determine the heat transfer during this process. ( take AHo = -47800 kJ/kg).
Q1) A constant volume tank contain 1 mole ofC7H14 and 12 mole of O2 gas at a temperature of 25 °C and 1 bar. The contents of the tank is ignited and C7H14is burned completely and final products temperature is found to be 1700 K. Determine the heat transfer during this process. ( take dalta Ho = -47800 kJ/kg).

Chapter 15 Solutions

Thermodynamics: An Engineering Approach

Ch. 15.7 - What does 100 percent theoretical air represent?Ch. 15.7 - Consider a fuel that is burned with (a) 130...Ch. 15.7 - What are the causes of incomplete combustion?Ch. 15.7 - Which is more likely to be found in the products...Ch. 15.7 - Methane (CH4) is burned with the stoichiometric...Ch. 15.7 - Prob. 16PCh. 15.7 - n-Butane fuel (C4H10) is burned with the...Ch. 15.7 - Prob. 18PCh. 15.7 - Propane (C3H8) is burned with 75 percent excess...Ch. 15.7 - Propane fuel (C3H8) is burned with 30 percent...Ch. 15.7 - In a combustion chamber, ethane (C2H6) is burned...Ch. 15.7 - Prob. 22PCh. 15.7 - Prob. 23PCh. 15.7 - Ethane (C2H6) is burned with 20 percent excess air...Ch. 15.7 - Octane (C8H18) is burned with 250 percent...Ch. 15.7 - Prob. 26PCh. 15.7 - A fuel mixture of 60 percent by mass methane (CH4)...Ch. 15.7 - Prob. 28PCh. 15.7 - A certain natural gas has the following volumetric...Ch. 15.7 - Prob. 30PCh. 15.7 - A gaseous fuel with a volumetric analysis of 45...Ch. 15.7 - Prob. 33PCh. 15.7 - The fuel mixer in a natural gas burner mixes...Ch. 15.7 - Prob. 35PCh. 15.7 - Prob. 36PCh. 15.7 - Determine the fuelair ratio when coal from...Ch. 15.7 - Prob. 38PCh. 15.7 - Prob. 39PCh. 15.7 - Prob. 40PCh. 15.7 - Prob. 41PCh. 15.7 - When are the enthalpy of formation and the...Ch. 15.7 - Prob. 43PCh. 15.7 - Prob. 44PCh. 15.7 - Prob. 45PCh. 15.7 - Prob. 46PCh. 15.7 - Prob. 48PCh. 15.7 - Repeat Prob. 1546 for liquid octane (C8H18).Ch. 15.7 - Ethane (C2H6) is burned at atmospheric pressure...Ch. 15.7 - Reconsider Prob. 1550. What minimum pressure of...Ch. 15.7 - Calculate the HHV and LHV of gaseous n-octane fuel...Ch. 15.7 - Prob. 53PCh. 15.7 - Consider a complete combustion process during...Ch. 15.7 - Prob. 56PCh. 15.7 - Prob. 57PCh. 15.7 - Prob. 58PCh. 15.7 - Propane fuel (C3H8) is burned with an airfuel...Ch. 15.7 - Prob. 60PCh. 15.7 - Prob. 61PCh. 15.7 - Prob. 62PCh. 15.7 - Octane gas (C8H18) at 25C is burned steadily with...Ch. 15.7 - Liquid ethyl alcohol [C2H5OH(l)] at 25C is burned...Ch. 15.7 - Prob. 66PCh. 15.7 - A gaseous fuel mixture that is 40 percent propane...Ch. 15.7 - A constant-volume tank contains a mixture of 120 g...Ch. 15.7 - Prob. 70PCh. 15.7 - Prob. 71PCh. 15.7 - Prob. 72PCh. 15.7 - A fuel is completely burned first with the...Ch. 15.7 - Prob. 74PCh. 15.7 - Prob. 75PCh. 15.7 - What is the adiabatic flame temperature of methane...Ch. 15.7 - Octane gas (C8H18) at 25C is burned steadily with...Ch. 15.7 - Acetylene gas (C2H2) at 25C is burned during a...Ch. 15.7 - Ethyl alcohol [C2H5OH(g)] is burned with 200...Ch. 15.7 - Prob. 81PCh. 15.7 - Prob. 82PCh. 15.7 - Reconsider Prob. 1582. The combustion products are...Ch. 15.7 - Express the increase of entropy principle for...Ch. 15.7 - Prob. 85PCh. 15.7 - What does the Gibbs function of formation gf of a...Ch. 15.7 - Liquid octane (C8H18) enters a steady-flow...Ch. 15.7 - Prob. 88PCh. 15.7 - Reconsider Prob. 1588. The automobile engine is to...Ch. 15.7 - Benzene gas (C6H6) at 1 atm and 77F is burned...Ch. 15.7 - Prob. 91PCh. 15.7 - n-Octane [C8H18(l)] is burned in the...Ch. 15.7 - A steady-flow combustion chamber is supplied with...Ch. 15.7 - Prob. 94RPCh. 15.7 - Prob. 95RPCh. 15.7 - Prob. 96RPCh. 15.7 - Prob. 97RPCh. 15.7 - Prob. 98RPCh. 15.7 - Prob. 99RPCh. 15.7 - n-Butane (C4H10) is burned with the stoichiometric...Ch. 15.7 - A gaseous fuel mixture of 60 percent propane...Ch. 15.7 - Calculate the higher and lower heating values of...Ch. 15.7 - Prob. 103RPCh. 15.7 - Methane gas (CH4) at 25C is burned steadily with...Ch. 15.7 - A 6-m3 rigid tank initially contains a mixture of...Ch. 15.7 - Propane gas (C3H8) enters a steady-flow combustion...Ch. 15.7 - Determine the highest possible temperature that...Ch. 15.7 - Liquid propane [C3H8(l)] enters a combustion...Ch. 15.7 - Prob. 109RPCh. 15.7 - Prob. 110RPCh. 15.7 - Prob. 111RPCh. 15.7 - A steam boiler heats liquid water at 200C to...Ch. 15.7 - Repeat Prob. 15112 using a coal from Utah that has...Ch. 15.7 - Liquid octane (C8H18) enters a steady-flow...Ch. 15.7 - Prob. 115RPCh. 15.7 - Consider the combustion of a mixture of an...Ch. 15.7 - Prob. 117RPCh. 15.7 - A fuel is burned steadily in a combustion chamber....Ch. 15.7 - A fuel is burned with 70 percent theoretical air....Ch. 15.7 - Prob. 126FEPCh. 15.7 - One kmol of methane (CH4) is burned with an...Ch. 15.7 - The higher heating value of a hydrocarbon fuel...Ch. 15.7 - Acetylene gas (C2H2) is burned completely during a...Ch. 15.7 - An equimolar mixture of carbon dioxide and water...Ch. 15.7 - A fuel is burned during a steady-flow combustion...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Extent of Reaction; Author: LearnChemE;https://www.youtube.com/watch?v=__stMf3OLP4;License: Standard Youtube License