Concept explainers
Two disks, each of 130-mm radius, are welded to the 500-mm rod CD. The rod-and-disks unit rotates at the constant rate
Fig.P15.254
(a)
Velocity and acceleration of point E
Answer to Problem 15.245P
The velocity
The acceleration
Explanation of Solution
Given information:
The relative angular velocity of disk and rod with respect to arm AB is
The angular velocity of arm AB is
The velocity in a three dimensional motion of a particle relative to rotating frame is defined as:
In the above equation,
The acceleration in a three dimensional motion of a particle relative to rotating frame is defined as:
In the above equation,
The Coriolis acceleration is defined as
Calculation:
The relative position vector
The relative position vector
Assume Bxyz as the rotating frame of reference.
The constant angular velocity
The relative angular velocity
Assume
The velocity
The relative velocity
The velocity
The acceleration
The relative acceleration
The Coriolis acceleration
The acceleration
Conclusion:
The velocity
The acceleration
(b)
Velocity and acceleration of point F
Answer to Problem 15.245P
The velocity
The acceleration
Explanation of Solution
Given information:
The relative angular velocity of disk and rod with respect to arm AB is
The angular velocity of arm AB is
The velocity in a three dimensional motion of a particle relative to rotating frame is defined as:
In the above equation,
The acceleration in a three dimensional motion of a particle relative to rotating frame is defined as:
In the above equation,
The Coriolis acceleration is defined as
Calculation:
The relative position vector
The relative position vector
Assume Bxyz as the rotating frame of reference.
The constant angular velocity
The relative angular velocity
Assume
The velocity
The relative velocity
The velocity
The acceleration
The relative acceleration
The Coriolis acceleration
The acceleration
Conclusion:
The velocity
The acceleration
Want to see more full solutions like this?
Chapter 15 Solutions
Vector Mechanics For Engineers
- At the instant shown in Fig. TT1.3, during deceleration, the velocity of an automobile is 13.3 m/s to the right. Knowing that the velocity of the contact point A of the wheel with the ground is 2.2 m/s to the right, determine the location of the instantaneous center of rotation of the wheel below point O in mm. Fig. TT1.3: A wheel in contact with the ground.arrow_forwardIn a four bar mechanism, the dimensions of the links are as given below:AB = 50 mm, BC = 66 mmCD = 56 mm and AD = 100 mmAt a given instant when | DAB=60°the angular velocity of link AB is 10.5rad/sec in CCW direction.Determine,i) Velocity of point Cii) Velocity of point E on link BC when BE = 40 mmiii) The angular velocity of link BC and CDiv) The velocity of an offset point F on link BC, if BF = 45 mm,CF = 30 mm and BCF is read clockwise.v) The velocity of an offset point G on link CD, if CG = 24mm, DG = 44 mm and DCG is read clockwise.vi) The velocity of rubbing of pins A, B, C and D. The ratios ofthe pins are 30 mm, 40 mm, 25 mm and 35 mmrespectively.arrow_forwardKnowing that at the instant shown the angular velocity of rod AB is 15 rad/s clockwise, write down the equation of velocity of point B relative to point A. -V_Bi=(-15k)x(-0.2j) +V_Bj=V_Ai-(15k) x (0.6i+0.25j) -V_Bi=V_A+(-15k)x(0.2j) +V_Bj=V_Ai-(omega_BDk) x (-0.6i-0.25j)arrow_forward
- The earth makes one complete revolution on its axis in 23 h 56 min.Knowing that the mean radius of the earth is 3960 mi, determine the linear velocity and acceleration of a point on the surface of the earth (a) at the equator, (b) at Philadelphia, latitude 40° north, (c) at the North Pole.arrow_forwardA juggling club is thrown vertically into the air. The center of gravity G of the 20-in. club is located 12 in. from the knob. Knowing that at the instant shown, G has a velocity of 4 ft/s upward and the club has an angular velocity of 30 rad/s counterclockwise, determine (a) the speeds of points A and B, (b) the location of the instantaneous center of rotation.arrow_forwardIn order to uncoil electrical wire from a 0.6-m-radius spool fixed to a truck, a worker drives to the left with a speed of vA = 5 m/s. At the same time, a second worker holds the cable as he walks to the right with a speed of vB = 3 m/s. Knowing that at the instant shown the thickness of wire on the spool is 40 mm, determine (a) the instantaneous center of rotation of the spool, (b) the velocity of point D on the inside of the spool.arrow_forward
- Problem 1: In a four bar mechanism, the dimensions of the links are as given below: AB = 50 mm, BC = 66 mm CD = 56 mm and AD = 100 mm At a given instant when |DAB 60o the angular velocity of link AB is 10.5 r/s in CCW direction. Determine, i) Velocity of point C ii) Velocity of point E on link BC when BE = 40 mm iii) The angular velocity of link BC and CD iv) The velocity of an offset point F on link BC, if BF = 45 mm, CF = 30 mm and BCF is read clockwise. v) The velocity of an offset point G on link CD, if CG = 24 mm, DG = 44 mm and DCG is read clockwise. vi) The velocity of rubbing of pins A, B, C and D. The ratio of the pins are 30 mm, 40 mm, 25 mm and 35 mm respectively.arrow_forwardThe bucket of a backhoe is the element AB of the four-bar linkage system ABCD. Assume that the points A and D are fixed and that the bucket rotates with a constant angular velocity WAB = 0.25 rad/s. In addition, suppose that, at the instant shown, point B is aligned vertically with point A, and C is aligned horizontally with B. Determine the acceleration of point C at the instant shown along with the angular acceleration of the elements BC and CD. Let h= 0.66 ft, e= 0-46 ft, l= 0.9 ft, and w= 1.0 ft.arrow_forwardThe rated speed of drum B of the belt sander shown is 2400 rpm. When the power is turned off, it is observed that the sander coasts from its rated speed to rest in 10 s. Assuming uniformly decelerated motion, determine the velocity and acceleration of point C of the belt, (a) immediately before the power is turned off, (b) 9 s later.arrow_forward
- A chain is looped around two gears of radius 40 mm that can rotate freely with respect to the 320-mm arm AB. The chain moves about arm AB in a clockwise direction at the constant rate of 80 mm/s relative to the arm. Knowing that in the position shown arm AB rotates clockwise about A at the constant rate ω = 0.75 rad/s, determine the acceleration of each of the chain links indicated Links 1 and 2.arrow_forwardIn a four-link mechanism, the dimensions of the links are given as AB=50mm, BC=66mm, CD=56mm, and AD=100mm. At the instant when <DAB = 60° , the link AB has an angular velocity of 10.5 rad/sec in the counterclockwise direction. Both A and D lies in the horizontal plane.For the given configuration of the mechanism, determine the following: angular velocity of the link CD, angular velocity of the link BC, velocity of an offset point G on the link CD if CG=24mm,DG=44mm Instructions: configuration diagram Scale: 1:1 velocity diagram. Scale: 1m/s : 95mmarrow_forwardConsider that at the instant shown, bar AB of the mechanical system below has a angular velocity (wAB) counterclockwise at 5 rad/s and an angular acceleration (alphaAB)counterclockwise 2 rad/s².The length of bar AB is 0.4 m and the length of bar BC is 1 m. For the instant shown, and using a "Analysis of Relative Motion", determine: (a) the speed of point B (b) angular velocity of connecting bar BC (c) the speed of point C (d) the acceleration of point B (d) the acceleration of point Carrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY