Vector Mechanics For Engineers
Vector Mechanics For Engineers
12th Edition
ISBN: 9781259977305
Author: BEER, Ferdinand P. (ferdinand Pierre), Johnston, E. Russell (elwood Russell), Cornwell, Phillip J., SELF, Brian P.
Publisher: Mcgraw-hill Education,
bartleby

Concept explainers

bartleby

Videos

Question
Book Icon
Chapter 18.2, Problem 18.102P
To determine

(a)

The couple M0 .

Expert Solution
Check Mark

Answer to Problem 18.102P

The couple M0 is 0.2115ftlb.

Explanation of Solution

Given information:

Angular velocity of disk in z-direction is 60rad/s, radius of the disk is 3in ,length of BC member is 4in.

The figure is represented below.

<x-custom-btb-me data-me-id='1725' class='microExplainerHighlight'>Vector</x-custom-btb-me> Mechanics For Engineers, Chapter 18.2, Problem 18.102P

Figure (1)

Write the equation for the mass of the disk.

m=Wg .........(1)

Here, weight of disk is W and acceleration due to gravity is g.

Write the expression for the angular momentum about point A.

HA=I¯xωxi+I¯yωyj+I¯zωzk .........(2)

Here, mass moment of inertia about the x-axis is I¯x, mass moment of inertia about the y-axis is I¯y, mass moment of inertia about the z-axis is I¯z, angular velocity of disk about x axis is ωx, angular velocity of disk about y axis is ωy .and angular velocity of disk about z axis is ωz.

Write the expression for the angular velocity of disk in x direction.

ωx=0 .........(3)

Substitute 0 for ωx, ω2 for ωy, and ω1 for ωz .in Equation (2).

HA=I¯x×0×i+I¯yω2j+I¯zω1kHA=I¯yω2j+I¯zω1k .........(4)

Here, ω2 is the angular velocity in y-direction and ω1 is the angular velocity in z-direction.

Write the expression for angular velocity in vector form.

Ω=ω2j ..........(5)

Write the expression for rate of angular velocity of the reference frame Axyz.

(H˙A)xyz=I¯yω˙2j+I¯zω˙1k .........(6)

Write the expression for rate of total angular velocity.

H˙A=(H˙)Ax'y'z'+Ω×HA .........(7)

Substitute (I¯yω2j+I¯zω1k) for HA, I¯yω˙2j+I¯zω˙1k for (H˙A)xyz and ω2j for Ω in Equation (7).

H˙A=I¯yω˙2j+I¯zω˙1k+ω2j×(I¯yω2j+I¯zω1k) .........(8)

Write the expression for Matrix multiplication of the vector product for Equation (8).

H˙A=(I¯yω˙2j+I¯zω˙1k)+I¯zω1ω2i=I¯zω1ω2i+I¯yω˙2j+I¯zω˙1k .........(9)

Write the expression for the mass moment of inertia about the y-direction.

I¯y=14mr2 .........(10)

Here mass of the disk is m and radius of the disk is r.

Write the expression for the mass moment of inertia about the z- direction.

I¯z=12mr2 .........(11)

Substitute 14mr2 for I¯y and 12mr2 for I¯z in Equation (9).

H˙A=12mr2×ω1ω2i+14mr2×ω˙2j+12mr2×ω˙1k .........(12)

Write the expression for the velocity of mass centre of the disk.

v¯=ω2j×ci .........(13)

Here, velocity of mass centre is v¯ and distance between B and A is c.

Write the expression for the matrix multiplication of the vector product for Equation (13).

v¯=cω2k .........(14)

Write the expression for the acceleration of the mass centre of the disk.

a¯=ω˙2j×ci+ω˙2j×v¯ .........(15)

Write the expression for the matrix multiplication of the vector product for Equation (15).

a¯=cω˙2kcω22i .........(16)

Write the expression for the the sum of the forces acting on the system.

F=Cxi+Czk+Dxi+Dzk .........(17)

Write the expression for the force in terms of mass and acceleration.

F=ma¯ .........(18)

Substitute Cxi+Czk+Dxi+Dzk for F in Equation (18).

Cxi+Czk+Dxi+Dzk=ma¯ .........(19)

Here, force at C in x-direction is Cx, force at C in z-direction is Cz. force at D in x-direction is Dx, and force at D in z-direction is Dz.

Substitute cω˙2kcω22i for a¯ in Equation (19)

Cxi+Czk+Dxi+Dzk=m×(cω˙2kcω22i)Cxi+Czk+Dxi+Dzk=mcω˙2kmcω22i .........(20)

Compare the coefficients of the unit vector of i on both side of Equation (20).

Cx+Dx=mcω22 .........(21)

Compare the coefficients of the unit vector of i on both side of Equation.

Cz+Dz=mcω˙2 .........(22)

Write the expression for the rate of angular momentum about D.

H˙D=H˙A+rA/D×ma¯ .........(23)

Here, distance between A and D is rA/D.

Write the expression for rA/D in vector form.

rA/D=cibj

Here, distance from the centre of disk to point B is c and distance of BD is b.

Substitute (12mr2×ω1ω2i+14mr2×ω˙2j+12mr2×ω˙1k) for H˙A, (cibj) for rA/D and ω˙2j×ci+ω˙2j×v¯ for a¯ in Equation(23).

H˙D=(12mr2×ω1ω2i+14mr2×ω˙2j+12mr2×ω˙1k)+(cibj)×m(ω˙2j×ci+ω˙2j×v¯) .........(24)

Write the expression for the matrix multiplication for vector product for equation (24).

H˙D=[(12mr2×ω1ω2i+14mr2×ω˙2j+12mr2×ω˙1k)mbω˙2i+mc2ω˙2j+mbcω22k]H˙D=[m(12r2ω1ω2bcω˙2)i+m(14r2+c2)ω˙2j+m(12r2ω˙1+bcω22)k] .........(25)

Write the expression for the moment about D

MD=M0j+2bj×(Cxi+Czk) .........(26)

Here, length of BC member is b and moment couple when system is at rest is M0.

Write the expression for the matrix multiplication for the vector product for equation (26).

MD=2bCzi+M0j2bCxk .........(27)

Here 2b is the length of DC.

The sum of the moment at D is equal to the rate of change of angular momentum at D.

MD=H˙D .........(29)

Substitute 2bCzi+M0j2bCxk for MD in equation (25).

[2bCzi+M0j2bCxk]=[m(12r2ω1ω2bcω˙2)i+m(14r2+c2)ω˙2j+m(12r2ω˙1+bcω22)k] .........(30)

Compare the coefficients of the unit vector of j on both side of Equation (30).

M0=m(14r2+c2)ω˙2 .........(31)

Compare the coefficients of the unit vector of k on both side of Equation (30).

2bCx=m(12r2ω˙1+bcω22)Cx=m2b(12r2ω˙1+bcω22) .........(32).

Compare the coefficients of the unit vector of i on both side of Equation (30).

2bCz=m(12r2ω1ω2bcω˙2)Cz=m2b(12r2ω1ω2bcω˙2) .........(33)

Substitute m2b(12r2ω˙1+bcω22) for Cx in Equation (21).

[m2b(12r2ω˙1+bcω22)+Dx]=mcω22Dx=m2b(12r2ω˙1+bcω22)mcω22Dx=mcω222+m2b12r2ω˙1Dx=(m2b)(12r2ω˙1+bcω22) .........(34)

Substitute m2b(12r2ω1ω2bcω˙2) for Cz in Equation (22).

[m2b(12r2ω1ω2bcω˙2)+Dz]=mcω˙2Dz=mcω˙2m2b(12r2ω1ω2bcω˙2)Dz=mcω˙22(m2b)(12r2ω1ω2)Dz=(m2b)(12r2ω1ω2+bcω˙2) .........(35)

Calculation:

Substitute 6lb for W and 32.2ft/s2 for g in Equation (1).

m=6lb32.2ft/s2=0.1863lbs2ft

Substitute values of 0.1863lbs2ft for m, (3in) for r, (5in) for c and 6rad/s2 for ω˙2 in Equation (31).

M0=0.1863lbs2ft(14(3in)2+(5in)2)×6rad/s2M0=0.1863lbs2ft×(14(3in(1ft12in))2+(5in(1ft12in))2)×6rad/s2M0=0.1863lbs2ft×((0.25ft)2+(0.4166ft)2)×6rad/s2M0=0.212ftlb

Thus value of couple M0 is 0.212ftlb.

Conclusion:

The value of couple is 0.212ftlb.

To determine

(b)

The dynamic reaction at C.

The dynamic reaction at D.

Expert Solution
Check Mark

Answer to Problem 18.102P

The dynamic reaction at C .is (12.58lb)i(9.43lb)k .

The dynamic reaction at D .is (12.58lb)i(9.43lb)k .

Explanation of Solution

Given information:

Write the expression for the angular velocity in terms of time in y-direction.

ω2=(ω2)0+ω˙2t .........(36)

Here time is t.

Calculation:

Substitute 0 for (ω2)0, 6rad/s2 for ω˙2 and 3s for t in Equation (36).

ω2=0+7.089rad/s2×2s=14.179rad/s

Substitute values of 0.1863lbs2ft for m, (3in) for r, (4in) for b, (5in) for c, 0 for ω˙1, and 18rad/s for ω2 in Equation (32).

Cx=[0.1863lbs2ft2(4in)×(12(3in)2(0)+(4in)(5in)(18rad/s2))]Cx=[0.1863lbs2ft2(4in(1ft12in))×(12(3in(1ft12in))2(0)+(4in(1ft12in))(5in(1ft12in))(18rad/s2))]=0.2795(0+44.999)=12.58lb

Substitute values of 0.1863lbs2ft for m, (3in) for r, (4in) for b, (5in) for c, 60rad/s for ω1, 18rad/s for ω2 and 0 for ω˙2 in Equation (33).

Cz=[0.1863lbs2ft2(4in)×(12(3in)2(60rad/s)(18rad/s)(4in)(5in)×0)]Cz=[0.1863lbs2ft2(4in(1ft12in))×(12(3in(1ft12in))2(60rad/s)(18rad/s)(4in(1ft12in))(5in(1ft12in))×0)]=0.2795(33.75+0)=9.43lb

Hence, dynamic reaction at C is (12.58lb)i(9.43lb)k.

Substitute values of 0.1863lbs2ft for m, (3in) for r, (4in) for b, (5in) for c, 0 for ω˙1, and 18rad/s for ω2, Equation (34).

Dx=(0.1863lbs2ft2(4in))(12(3in)2×0+(4in)(5in)(18rad/s)2)Dx=(0.1863lbs2ft2(4in(1ft12in)))(12(3in(1ft12in))2×0+(4in(1ft12in))(5in(1ft12in))(18rad/s)2)Dx=0.2795(0+44.999)lbDx=12.58lb

Substitute values of 0.1863lbs2ft for m, (3in) for r, (4in) for b, (5in) for c, 60rad/s for ω1, 18rad/s for ω2 and 0 for ω˙2 in Equation (35).

Dz=(0.1863lbs2ft2(4in))(12(3in)2×(60rad/s)×(18rad/s)+(4in)(5in)×0)Dz=(0.1863lbs2ft2(4in(1ft12in)))(12(3in(1ft12in))2×(60rad/s)×(18rad/s)+(4in(1ft12in))(5in(1ft12in))×0)Dz=9.43lb

Hence, dynamic reaction at D is (12.58lb)i(9.43lb)k

Conclusion:

The dynamic reactions at C is (12.58lb)i(9.43lb)k.

The dynamic reactions at D is (12.58lb)i(9.43lb)k.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
A 6-lb homogeneous disk of radius 3 in. spins as shown at the constant rate w1 = 60 rad/s. The disk is supported by the fork-ended rod AB , which is welded to the vertical shaft CBD The system is at rest when a couple M0 is applied as shown to the shaft for 3 s and then removed. Knowing that the maximum angular velocity reached by the shaft is 18 rad/s, determine (a) the couple M0) the dynamic reactions at C and D after the couple has been removed.
A coin is tossed into the air. It is observed to spin at the rate of 600 rpm about an axis GC perpendicular to the coin and to precess about the vertical direction GD Knowing that GC forms an angle of 15° with GD, determine (a) the angle that the angular velocity w of the coin forms with G (b) the rate of precession of the coin about GD.
A uniform thin disk with a 6-in. diameter is attached to the end of a rod AB of negligible mass that is supported by a ball-and-socket joint at point A. Knowing that the disk is observed to precess about the vertical axis AC at the constant rate of 36 rpm in the sense indicated and that its axis of symmetry AB forms an angle β= 60° with AC, determine the rate at which the disk spins about rod AB.

Chapter 18 Solutions

Vector Mechanics For Engineers

Ch. 18.1 - Prob. 18.11PCh. 18.1 - Prob. 18.12PCh. 18.1 - Prob. 18.13PCh. 18.1 - Prob. 18.14PCh. 18.1 - Prob. 18.15PCh. 18.1 - For the assembly of Prob. 18.15, determine (a) the...Ch. 18.1 - Prob. 18.17PCh. 18.1 - Determine the angular momentum of the shaft of...Ch. 18.1 - Prob. 18.19PCh. 18.1 - Prob. 18.20PCh. 18.1 - Prob. 18.21PCh. 18.1 - Prob. 18.22PCh. 18.1 - Prob. 18.23PCh. 18.1 - Prob. 18.24PCh. 18.1 - Prob. 18.25PCh. 18.1 - Prob. 18.26PCh. 18.1 - Prob. 18.27PCh. 18.1 - Prob. 18.28PCh. 18.1 - Prob. 18.29PCh. 18.1 - Prob. 18.30PCh. 18.1 - Prob. 18.31PCh. 18.1 - Prob. 18.32PCh. 18.1 - Prob. 18.33PCh. 18.1 - Prob. 18.34PCh. 18.1 - Prob. 18.35PCh. 18.1 - Prob. 18.36PCh. 18.1 - Prob. 18.37PCh. 18.1 - Prob. 18.38PCh. 18.1 - Prob. 18.39PCh. 18.1 - Prob. 18.40PCh. 18.1 - Prob. 18.41PCh. 18.1 - Prob. 18.42PCh. 18.1 - Determine the kinetic energy of the disk of Prob....Ch. 18.1 - Prob. 18.44PCh. 18.1 - Prob. 18.45PCh. 18.1 - Prob. 18.46PCh. 18.1 - Prob. 18.47PCh. 18.1 - Prob. 18.48PCh. 18.1 - Prob. 18.49PCh. 18.1 - Prob. 18.50PCh. 18.1 - Prob. 18.51PCh. 18.1 - Prob. 18.52PCh. 18.1 - Determine the kinetic energy of the space probe of...Ch. 18.1 - Prob. 18.54PCh. 18.2 - Determine the rate of change H.G of the angular...Ch. 18.2 - Prob. 18.56PCh. 18.2 - Determine the rate of change H.G of the angular...Ch. 18.2 - Prob. 18.58PCh. 18.2 - Prob. 18.59PCh. 18.2 - Prob. 18.60PCh. 18.2 - Prob. 18.61PCh. 18.2 - Prob. 18.62PCh. 18.2 - Prob. 18.63PCh. 18.2 - Prob. 18.64PCh. 18.2 - A slender, uniform rod AB of mass m and a vertical...Ch. 18.2 - A thin, homogeneous triangular plate of weight 10...Ch. 18.2 - Prob. 18.67PCh. 18.2 - Prob. 18.68PCh. 18.2 - Prob. 18.69PCh. 18.2 - Prob. 18.70PCh. 18.2 - Prob. 18.71PCh. 18.2 - Prob. 18.72PCh. 18.2 - Prob. 18.73PCh. 18.2 - Prob. 18.74PCh. 18.2 - Prob. 18.75PCh. 18.2 - Prob. 18.76PCh. 18.2 - Prob. 18.77PCh. 18.2 - Prob. 18.78PCh. 18.2 - Prob. 18.79PCh. 18.2 - Prob. 18.80PCh. 18.2 - Prob. 18.81PCh. 18.2 - Prob. 18.82PCh. 18.2 - Prob. 18.83PCh. 18.2 - Prob. 18.84PCh. 18.2 - Prob. 18.85PCh. 18.2 - Prob. 18.86PCh. 18.2 - Prob. 18.87PCh. 18.2 - Prob. 18.88PCh. 18.2 - Prob. 18.89PCh. 18.2 - The slender rod AB is attached by a clevis to arm...Ch. 18.2 - The slender rod AB is attached by a clevis to arm...Ch. 18.2 - Prob. 18.92PCh. 18.2 - The 10-oz disk shown spins at the rate 1=750 rpm,...Ch. 18.2 - Prob. 18.94PCh. 18.2 - Prob. 18.95PCh. 18.2 - Prob. 18.96PCh. 18.2 - Prob. 18.97PCh. 18.2 - Prob. 18.98PCh. 18.2 - Prob. 18.99PCh. 18.2 - Prob. 18.100PCh. 18.2 - Prob. 18.101PCh. 18.2 - Prob. 18.102PCh. 18.2 - Prob. 18.103PCh. 18.2 - A 2.5-kg homogeneous disk of radius 80 mm rotates...Ch. 18.2 - For the disk of Prob. 18.99, determine (a) the...Ch. 18.2 - Prob. 18.106PCh. 18.3 - Prob. 18.107PCh. 18.3 - A uniform thin disk with a 6-in. diameter is...Ch. 18.3 - Prob. 18.109PCh. 18.3 - Prob. 18.110PCh. 18.3 - Prob. 18.111PCh. 18.3 - A solid cone of height 9 in. with a circular base...Ch. 18.3 - Prob. 18.113PCh. 18.3 - Prob. 18.114PCh. 18.3 - Prob. 18.115PCh. 18.3 - Prob. 18.116PCh. 18.3 - Prob. 18.117PCh. 18.3 - Prob. 18.118PCh. 18.3 - Show that for an axisymmetric body under no force,...Ch. 18.3 - Prob. 18.120PCh. 18.3 - Prob. 18.121PCh. 18.3 - Prob. 18.122PCh. 18.3 - Prob. 18.123PCh. 18.3 - Prob. 18.124PCh. 18.3 - Prob. 18.125PCh. 18.3 - Prob. 18.126PCh. 18.3 - Prob. 18.127PCh. 18.3 - Prob. 18.128PCh. 18.3 - An 800-lb geostationary satellite is spinning with...Ch. 18.3 - Solve Prob. 18.129, assuming that the meteorite...Ch. 18.3 - Prob. 18.131PCh. 18.3 - Prob. 18.132PCh. 18.3 - Prob. 18.133PCh. 18.3 - Prob. 18.134PCh. 18.3 - Prob. 18.135PCh. 18.3 - Prob. 18.136PCh. 18.3 - Prob. 18.137PCh. 18.3 - Prob. 18.138PCh. 18.3 - Prob. 18.139PCh. 18.3 - Prob. 18.140PCh. 18.3 - Prob. 18.141PCh. 18.3 - Prob. 18.142PCh. 18.3 - Prob. 18.143PCh. 18.3 - Prob. 18.144PCh. 18.3 - Prob. 18.145PCh. 18.3 - Prob. 18.146PCh. 18 - Prob. 18.147RPCh. 18 - Prob. 18.148RPCh. 18 - A rod of uniform cross-section is used to form the...Ch. 18 - A uniform rod of mass m and length 5a is bent into...Ch. 18 - Prob. 18.151RPCh. 18 - Prob. 18.152RPCh. 18 - A homogeneous disk of weight W=6 lb rotates at the...Ch. 18 - Prob. 18.154RPCh. 18 - Prob. 18.155RPCh. 18 - Prob. 18.156RPCh. 18 - Prob. 18.157RPCh. 18 - Prob. 18.158RP
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Dynamics - Lesson 1: Introduction and Constant Acceleration Equations; Author: Jeff Hanson;https://www.youtube.com/watch?v=7aMiZ3b0Ieg;License: Standard YouTube License, CC-BY