Vector Mechanics for Engineers: Statics and Dynamics
Vector Mechanics for Engineers: Statics and Dynamics
12th Edition
ISBN: 9781259638091
Author: Ferdinand P. Beer, E. Russell Johnston Jr., David Mazurek, Phillip J. Cornwell, Brian Self
Publisher: McGraw-Hill Education
bartleby

Videos

Question
Book Icon
Chapter 18.3, Problem 18.129P
To determine

The precession axis, rates of precession, and the spin rate of the satellite after the impact.

Expert Solution & Answer
Check Mark

Answer to Problem 18.129P

The precession along x, y, and z axis (θx,θy,andθz) is 125°_, 36.4°_, and 80.7°_ respectively.

The precession rate (ϕ˙) is 0.949rad/s_.

The spin rate (ψ˙) is 0.16rad/s_.

Explanation of Solution

Given information:

The weight of geostationary satellite (W) is 800 lb.

The angular velocity of the satellite (ω0) is (1.5rad/s)j.

The weight of a meteorite W is 6 oz.

The travelling velocity of the meteorite v0 is (1,600ft/s)i+(1,300ft/s)j+(4,000ft/s)k.

The distance value b is 20 in..

The radii of gyration of the satellite along x, y, and z direction (k¯x, k¯y, and k¯z) is 28.8 in., 32.4 in., and 28.8 in. respectively.

Calculation:

Determine the mass of the satellite (m).

m=Wg

Here, g is the acceleration due to gravity.

Substitute 800 lb for W and 32.2ft/s2 for g.

m=80032.2=24.845lbs2/ft

Determine the principal moment of inertia along x axis.

I¯x=mk¯x2

Substitute 24.845lbs2/ft for m and 28.8 in. for k¯x.

I¯x=24.845×(28.8in.×1ft12in.)2=143.11lbs2ft

Determine the principal moment of inertia along y axis.

I¯y=mk¯y2

Substitute 24.845lbs2/ft for m and 32.4 in. for k¯y.

I¯y=24.845×(32.4in.×1ft12in.)2=181.12lbs2ft

Determine the principal moment of inertia along z axis.

I¯z=mk¯z2

Substitute 24.845lbs2/ft for m and 28.8 in. for k¯z.

I¯z=24.845×(28.8in.×1ft12in.)2=143.11lbs2ft

Determine the mass of the meteorite m.

m=Wg

Substitute 6 oz for W and 32.2ft/s2 for g.

m=6oz×0.0625lb1oz32.2=0.0116lbs2/ft

Determine the initial moment of meteorite (p0).

p0=mv0

Substitute 0.0116lbs2/ft for m and (1,600ft/s)i+(1,300ft/s)j+(4,000ft/s)k for v0.

p0=0.01164×((1,600ft/s)i+(1,300ft/s)j+(4,000ft/s)k)=(18.62lbs)i+(15.13lbs)j+(46.56lbs)k

Consider that the position of the satellite mass center plus the meteorite is essentially that of the satellite alone.

Determine the position of the point B relative to the mass center.

rB/G=xiyj

Here, x is the horizontal distance and y is the vertical distance.

Substitute 42 in. for x and 20 in. for y.

rB/G=(42in.×1ft12in.)i(20in.×1ft12in.)j=(3.5ft)i(1.667ft)j

The angular velocity of satellite before impact (ω0) is (1.5rad/s)j.

The angular velocity of satellite before impact along x, y, and z axis is (ω0)x=0, (ω0)y=1.5rad/s, and (ω0)z=0.

Determine the angular momentum of satellite–meteorite system before impact (HG)0.

(HG)0=I¯yω0j+rB/G×p0

Substitute 181.12lbs2ft for I¯y, 1.5rad/s for ω0, (3.5ft)i+(1.667ft)j for rB/G, and (18.62lbs)i+(15.13lbs)j+(46.56lbs)k for p0.

(HG)0=(181.12×1.5)j+|ijk3.51.667018.6215.1346.56|={271.68j+i(1.667×46.560)j(3.5×46.560)+k(3.5×15.13(1.667×18.62))}=271.68j77.61i162.96j+21.92k=(77.61i+108.72j+21.92k)lbsft

Principle of impulse and momentum for satellite–meteorite system:

The value of moments about G is (HG)1=(HG)0=HG.

The expression for HG is HG=I¯xωxi+I¯yωyj+I¯zωzk.

Determine the angular velocity about x axis.

ωx=(HG)xIx

Substitute 77.61lbsft for (HG)x and 143.11lbs2ft for Ix.

ωx=77.61143.11=0.5423rad/s

Determine the angular velocity about y axis.

ωy=(HG)yIy

Substitute 108.72lbsft for (HG)y and 181.12lbs2ft for I¯y.

ωy=108.72181.12=0.6rad/s

Determine the angular velocity about z axis.

ωz=(HG)zIz

Substitute 21.92lbsft for (HG)z and 143.11lbs2ft for I¯z.

ωz=21.92143.11=0.153rad/s

Determine the vector format of angular velocity using the relation;

ω=ωxi+ωyj+ωzk

Substitute 0.5423rad/s for ωx, 0.6rad/s for ωy, and 0.153rad/s for ωz.

ω=(0.5423rad/s)i+(0.6rad/s)j+(0.153rad/s)k

Determine the magnitude of the angular velocity ω.

ω=ωx2+ωy2+ωz2

Substitute 0.5423rad/s for ωx, 0.6rad/s for ωy, and 0.153rad/s for ωz.

ω=(0.5423)2+(0.6)2+(0.153)2=0.823rad/s

Determine the magnitude of angular momentum HG using the relation.

HG=(HG)x2+(HG)y2+(HG)z2

Substitute 77.61lbsft for (HG)x, 108.72lbsft for (HG)y, and 21.92lbsft for (HG)z.

HG=(77.61)2+(108.72)2+(21.92)2=135lbsft

Motion after impact:

The moment of inertia about x and y axis is equal, the body moves as an axisymmetrical body with the y axis as the symmetry axis.

The moment of inertia about the symmetry axis is I=I¯y=181.12lbs2ft.

The moment of inertia about a transverse axis through G is I=I¯x=I¯z=143.11lbs2ft.

The precession is retrograde when the value of I>I.

Determine the angle θ about x axis.

cosθx=(HG)xHG

Substitute 77.61lbsft for (HG)x and 135lbsft for HG.

cosθx=77.61135θx=cos1(0.575)θx=125°

Determine the angle θ about y axis.

cosθy=(HG)yHG

Substitute 108.72lbsft for (HG)y and 135lbsft for HG.

cosθy=108.72135θy=cos1(0.805)θy=36.4°

Determine the angle θ about z axis.

cosθz=(HG)zHG

Substitute 21.92lbsft for (HG)z and 135lbsft for HG.

cosθz=21.92135θz=cos1(0.162)θz=80.7°

Thus, the precession along x, y, and z axis (θx,θy,andθz) is 125°_, 36.4°_, and 80.7°_ respectively.

The angle θ between the spin axis (y–axis) and the precession axis remains constant θ=θy=36.4°.

Determine the angle γ between the angular velocity and the spin axis.

cosγ=ωyω

Substitute 0.6rad/s for ωy and 0.823rad/s for ω.

cosγ=0.60.823γ=cos1(0.729)γ=43.2°

Determine the value of (γθ).

Substitute 43.2° for γ and 36.4° for θ.

(γθ)=43.2°36.4°=6.8°

Draw the free body diagram of precession and spin axis as in Figure (1).

Vector Mechanics for Engineers: Statics and Dynamics, Chapter 18.3, Problem 18.129P , additional homework tip  1

Draw the free body diagram of triangle of vector addition as in Figure (2).

Vector Mechanics for Engineers: Statics and Dynamics, Chapter 18.3, Problem 18.129P , additional homework tip  2

Write the relation between the angles using the sine law.

ϕ˙sinγ=ψ˙sin(γθ)=ωsinθ

Determine the precession rate (ϕ˙) using law of sines.

ϕ˙=ωsinγsinθ

Substitute 0.823rad/s for ω, 43.2° for γ, and 36.4° for θ.

ϕ˙=0.823×sin43.2°sin36.4°=0.949rad/s

Therefore, the precession rate (ϕ˙) is 0.949rad/s_.

Determine the rate of spin ψ˙ using the relation.

ψ˙=ωsin(γθ)sinθ

Substitute 0.823rad/s for ω, 6.8° for (γθ), and 36.4° for θ.

ψ˙=0.823sin6.8°sin36.4°=0.16rad/s

The precession is retrograde due to value of γ is greater than the angle θ.

Therefore, the spin rate (ψ˙) is 0.16rad/s_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
Disk A, of weight 5 lb and radius r = 3 in., is at rest when it is placed in contact with a belt that moves at a constant speed v = 50 ft/s. Knowing that μk = 0.20 between the disk and the belt, determine the time required for the disk to reach a constant angular velocity.
A long ladder of length l, mass m, and centroidal mass moment of inertia I is placed against a house at an angle 0=0O. Knowing that the ladder is released from rest, determine the angular velocity of the ladder when 0=02. Assume the ladder can slide freely on the horizontal ground and on the vertical wall.
The upper and lower ends of the arms are pivoted on the axis of the governor has equal arms of length 44cm.  The extension arms of the lower links are each 10cm long and parallel to the axis.When the governor at minimum and maximum position, the radii of rotation of the balls are 17cm and 24cm respectively. The mass of each ball is 10 kg and the mass of the central load is 102 kg. Determine :  1.The range of angular speed of the governor and identify the type of governor 2.Draw the line diagram when the governor at minimum and maximum position

Chapter 18 Solutions

Vector Mechanics for Engineers: Statics and Dynamics

Ch. 18.1 - Prob. 18.12PCh. 18.1 - Prob. 18.13PCh. 18.1 - Two L-shaped arms each have a mass of 5 kg and are...Ch. 18.1 - For the assembly of Prob. 18.15, determine (a) the...Ch. 18.1 - Prob. 18.17PCh. 18.1 - Determine the angular momentum of the shaft of...Ch. 18.1 - Prob. 18.20PCh. 18.1 - Prob. 18.21PCh. 18.1 - Prob. 18.22PCh. 18.1 - Prob. 18.23PCh. 18.1 - Prob. 18.24PCh. 18.1 - Prob. 18.25PCh. 18.1 - Prob. 18.26PCh. 18.1 - Prob. 18.27PCh. 18.1 - Prob. 18.28PCh. 18.1 - A circular plate of mass m is falling with a...Ch. 18.1 - Prob. 18.30PCh. 18.1 - Prob. 18.31PCh. 18.1 - Determine the impulse exerted on the plate of...Ch. 18.1 - The coordinate axes shown represent the principal...Ch. 18.1 - Prob. 18.34PCh. 18.1 - Prob. 18.37PCh. 18.1 - Prob. 18.38PCh. 18.1 - Prob. 18.39PCh. 18.1 - Prob. 18.40PCh. 18.1 - Prob. 18.41PCh. 18.1 - Prob. 18.42PCh. 18.1 - Determine the kinetic energy of the disk of Prob....Ch. 18.1 - Determine the kinetic energy of the solid...Ch. 18.1 - Prob. 18.45PCh. 18.1 - Determine the kinetic energy of the disk of Prob....Ch. 18.1 - Determine the kinetic energy of the assembly of...Ch. 18.1 - Determine the kinetic energy of the shaft of Prob....Ch. 18.1 - Prob. 18.49PCh. 18.1 - Prob. 18.50PCh. 18.1 - Determine the kinetic energy lost when edge C of...Ch. 18.1 - Prob. 18.52PCh. 18.1 - Prob. 18.53PCh. 18.1 - Determine the kinetic energy of the space probe of...Ch. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.56PCh. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.58PCh. 18.2 - Prob. 18.59PCh. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.61PCh. 18.2 - Determine the rate of change HD of the angular...Ch. 18.2 - Prob. 18.63PCh. 18.2 - Prob. 18.64PCh. 18.2 - A slender, uniform rod AB of mass m and a vertical...Ch. 18.2 - Prob. 18.66PCh. 18.2 - The assembly shown consists of pieces of sheet...Ch. 18.2 - The 8-kg shaft shown has a uniform cross-section....Ch. 18.2 - Prob. 18.69PCh. 18.2 - Prob. 18.70PCh. 18.2 - Prob. 18.71PCh. 18.2 - Knowing that the plate of Prob. 18.66 is initially...Ch. 18.2 - Prob. 18.73PCh. 18.2 - The shaft of Prob. 18.68 is initially at rest ( =...Ch. 18.2 - The assembly shown weighs 12 lb and consists of 4...Ch. 18.2 - Prob. 18.76PCh. 18.2 - Prob. 18.79PCh. 18.2 - Prob. 18.80PCh. 18.2 - Prob. 18.81PCh. 18.2 - Prob. 18.82PCh. 18.2 - The uniform, thin 5-lb disk spins at a constant...Ch. 18.2 - The essential structure of a certain type of...Ch. 18.2 - A model of a type of crusher is shown. A disk of...Ch. 18.2 - Prob. 18.86PCh. 18.2 - Prob. 18.87PCh. 18.2 - The 2-lb gear A is constrained to roll on the...Ch. 18.2 - Prob. 18.89PCh. 18.2 - Prob. 18.90PCh. 18.2 - 18.90 and 18.91The slender rod AB is attached by a...Ch. 18.2 - The essential structure of a certain type of...Ch. 18.2 - The 10-oz disk shown spins at the rate 1 = 750...Ch. 18.2 - Prob. 18.94PCh. 18.2 - Prob. 18.95PCh. 18.2 - Two disks each have a mass of 5 kg and a radius of...Ch. 18.2 - Prob. 18.97PCh. 18.2 - Prob. 18.98PCh. 18.2 - A thin disk of mass m = 4 kg rotates with an...Ch. 18.2 - Prob. 18.101PCh. 18.2 - Prob. 18.102PCh. 18.2 - A 2.5-kg homogeneous disk of radius 80 mm rotates...Ch. 18.2 - A 2.5-kg homogeneous disk of radius 80 mm rotates...Ch. 18.2 - For the disk of Prob. 18.99, determine (a) the...Ch. 18.3 - A uniform thin disk with a 6-in. diameter is...Ch. 18.3 - A uniform thin disk with a 6-in. diameter is...Ch. 18.3 - Prob. 18.109PCh. 18.3 - The top shown is supported at the fixed point O...Ch. 18.3 - Prob. 18.111PCh. 18.3 - Prob. 18.112PCh. 18.3 - Prob. 18.113PCh. 18.3 - A homogeneous cone with a height of h = 12 in. and...Ch. 18.3 - Prob. 18.115PCh. 18.3 - Prob. 18.116PCh. 18.3 - Prob. 18.117PCh. 18.3 - The propeller of an air boat rotates at 1800 rpm....Ch. 18.3 - Prob. 18.119PCh. 18.3 - Prob. 18.120PCh. 18.3 - Prob. 18.121PCh. 18.3 - Prob. 18.122PCh. 18.3 - Prob. 18.123PCh. 18.3 - A coin is tossed into the air. It is observed to...Ch. 18.3 - Prob. 18.125PCh. 18.3 - Prob. 18.126PCh. 18.3 - Prob. 18.127PCh. 18.3 - Prob. 18.128PCh. 18.3 - Prob. 18.129PCh. 18.3 - Prob. 18.130PCh. 18.3 - Prob. 18.131PCh. 18.3 - Prob. 18.132PCh. 18.3 - Prob. 18.133PCh. 18.3 - Prob. 18.134PCh. 18.3 - Prob. 18.135PCh. 18.3 - A homogeneous disk with a radius of 9 in. is...Ch. 18.3 - The top shown is supported at the fixed point O....Ch. 18.3 - Prob. 18.138PCh. 18.3 - Prob. 18.139PCh. 18.3 - Prob. 18.140PCh. 18.3 - Prob. 18.141PCh. 18.3 - Prob. 18.142PCh. 18.3 - Consider a rigid body of arbitrary shape that is...Ch. 18.3 - Prob. 18.144PCh. 18.3 - Prob. 18.145PCh. 18 - Three 25-lb rotor disks are attached to a shaft...Ch. 18 - Prob. 18.148RPCh. 18 - Prob. 18.149RPCh. 18 - A uniform rod of mass m and length 5a is bent into...Ch. 18 - Prob. 18.151RPCh. 18 - Prob. 18.152RPCh. 18 - Prob. 18.153RPCh. 18 - Prob. 18.154RPCh. 18 - Prob. 18.155RPCh. 18 - The space capsule has no angular velocity when the...Ch. 18 - A homogeneous rectangular plate of mass m and...Ch. 18 - The essential features of the gyrocompass are...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Mechanical SPRING DESIGN Strategy and Restrictions in Under 15 Minutes!; Author: Less Boring Lectures;https://www.youtube.com/watch?v=dsWQrzfQt3s;License: Standard Youtube License