You are working in a laboratory that studies the effects of currents in various crystals. One of the experiments involves a requirement for a steady current of I = 0.500 A in a wire that delivers the current to the crystal. Both the wire and the crystal are in a chamber whose interior temperature T will vary from -40.0°C to 150°C. The wire is made of tungsten and is of length L = 25.0 cm and radius r = 1.00 mm. A test run is being made before the crystal is added to the circuit. Your supervisor asks you to determine the range of voltages that must be supplied to the wire in the test run to maintain its current at 0.500 A.

You are working in a laboratory that studies the effects of currents in various crystals. One of the experiments involves a requirement for a steady current of I = 0.500 A in a wire that delivers the current to the crystal. Both the wire and the crystal are in a chamber whose interior temperature T will vary from -40.0°C to 150°C. The wire is made of tungsten and is of length L = 25.0 cm and radius r = 1.00 mm. A test run is being made before the crystal is added to the circuit. Your supervisor asks you to determine the range of voltages that must be supplied to the wire in the test run to maintain its current at 0.500 A.

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter21: Current And Direct Current Circuits

Section: Chapter Questions

Problem 14P

See similar textbooks

Similar questions

Consider two wires made of different materials. Wire A has a conductivity of 1.3 × 107 Ω-1m-1, and wire B has a conductivity of 5.1 × 107 Ω-1m-1. Wire A has a circular cross-section with radius 3.78 mm. If there is an electric field of 0.085 V/m inside it, how much current, in amperes, is flowing through it? Wire B has a square 3.78 mm × 3.78 mm cross-section. If wire B has the same electric field as Wire A did in part (a), what current, in amperes, would be passing through it?
2) What is the drift speed of electrons in the 12-gauge wire of a certain conductor in a typical building of the UET physics lab having cross- sectional area of 3.31 um^2 and carries a uniform current of 10000.0 mA? Suppose each atom of the conductor contributes one free electron to the current, whereas the molar mass and density of the conductor is 63.5 g/mol and 8.92 g/cm^3.* Ob) 3 mf O c) 2.3 PF od) 2.1 m e) 2 UF f) 2 mF O F g) 1 m F O HINE
A spool of iron wire 260 m long and with a diameter of 0.320 mm is at 20.0°C. For iron, the resistivity is 10.0 ✕ 10−8 Ω · m and the temperature coefficient of resistivity is 5.00 ✕ 10−3 (°C)−1. (a) What is the magnitude of the electric field (in V/m) in the wire if it carries a current of 0.550 A? V/m (b) What is the electric power (in W) delivered to the spool while it carries a current of 0.550 A? W (c) What is the power (in W) delivered to the spool if the potential difference across the wire is held constant and the temperature is increased to 280°C? W
The temperature in Philadelphia, PA can vary between 68.00 °F and 100.00 °F in one summer day. By what percentage will an aluminum wire’s resistance change during the day?
A spool of iron wire 320 m long and with a diameter of 0.360 mm is at 20.0°C. For iron, the resistivity is 10.0 ✕ 10−8 Ω · m and the temperature coefficient of resistivity is 5.00 ✕ 10−3 (°C)−1. (a)What is the magnitude of the electric field (in V/m) in the wire if it carries a current of 0.550 A?V/m (b)What is the electric power (in W) delivered to the spool while it carries a current of 0.550 A? W (c)What is the power (in W) delivered to the spool if the potential difference across the wire is held constant and the temperature is increased to 310°C? W
A spool of tungsten wire 200 m long and with a diameter of 0.360 mm is at 20.0°C. For tungsten, the resistivity is 5.60 ✕ 10−8 Ω · m and the temperature coefficient of resistivity is 4.50 ✕ 10−3 (°C)−1. (a) What is the magnitude of the electric field (in V/m) in the wire if it carries a current of 0.450 A? V/m (b) What is the electric power (in W) delivered to the spool while it carries a current of 0.450 A? W (c) What is the power (in W) delivered to the spool if the potential difference across the wire is held constant and the temperature is increased to 310°C? W
A wire of copper having length I and area of cross-section A is taken and a current / is flown through it. The power dissipated in the wire is P. If we take an aluminium wire having same dimensions and pass the same current through it, the power dissipated will be: A) P B) < P C) > P D) 2P
With a potential difference of 4V across a wire of length 5m and cross section area 1x10-6 m2 there is found to be a current of 12A flowing in the wire. What is the conductivity of the wire? Select one: a. 1.5×107 Siemens b. 9.6×106 Siemens c. 6×10-7 Siemens d. 1.66×107 Siemens
The electric field of the material between two coaxial cables of radius 0.525 cm and 0.675 cm is given as E = 2.85 V.m/r3 . If the conductivity of the material is 5 x 1010 S/m, what is the current density in the material?
A typical wire for laboratory experiments is made of copper and has a radius 0.815 mm.Calculate the drift speed of electrons in such a wire carrying a current of 1 A, assuming one freeelectron per atom. (density of copper 8.93 g/cm3 and molar mass of copper 63.5 g/mol)
a) What energy (in J) is dissipated by a lightning bolt having an 18,500 A current, a voltage of 2.05 ✕ 102 MV, and a length of 1.00 ms? b) What mass (in kg) of tree sap could be raised from 18.0°C to its boiling point and then evaporated by this energy, assuming sap has the same thermal characteristics as water?
a)What energy (in J) is dissipated by a lightning bolt having a 17,300 A current, a voltage of 1.40 ✕ 102 MV, and a length of 1.00 ms? J (b)What mass (in kg) of tree sap could be raised from 18.0°C to its boiling point and then evaporated by this energy, assuming sap has the same thermal characteristics as water?