Engineering Mechanics: Statics & Dynamics (14th Edition)
Engineering Mechanics: Statics & Dynamics (14th Edition)
14th Edition
ISBN: 9780133951851
Author: HIBBELER
Publisher: PEARSON
bartleby

Concept explainers

bartleby

Videos

Textbook Question
Book Icon
Chapter 3.3, Problem 18P

If the spring DB has an unstretched length of 2 m. determine the stiffness of the spring to hold the 40-kg crate In the position shown.

Chapter 3.3, Problem 18P, If the spring DB has an unstretched length of 2 m. determine the stiffness of the spring to hold the

Expert Solution & Answer
Check Mark
To determine

The stiffness of the spring.

Answer to Problem 18P

The stiffness of the spring k is 176N/m_.

Explanation of Solution

Given information:

The unstretched length of the spring DB is 2 m.

The mass of a crate is 40 kg.

Assumption:

Consider the point E in between the points B and C.

Show the free body diagram of the spring as in Figure 1.

Engineering Mechanics: Statics & Dynamics (14th Edition), Chapter 3.3, Problem 18P

Determine the length of the member CD using the formula.

lCD=lDE2+lCE2 (I)

Here, length of the point DE is lDE and length of the point CE is lCE.

Determine the length of the spring AB using the formula.

lBD=lDE2+lBE2 (II)

Here, length of the point BE is lBE.

Determine the weight of the crate.

W=mg (III)

Here, the mass of a crate is m and the acceleration due to gravity is g.

Determine the tension force of the member BD and CD by applying the equation of equilibrium.

Along the horizontal direction:

Fx=0TBDcosθBDTCDcosθCD=0 (IV)

Here, the tension force of the member CD is TCD and the angle for the member CD is θCD.

Along the vertical direction:

Fy=0TBDsinθBD+TCDsinθCDW=0 (V)

Determine the stiffness of the spring BD.

FBD=kBDxBD=kBD(lBDl0) (VI)

Here, the tension force of the spring member BD is FBD and the un-stretched length of the spring BD is l0.

Conclusion:

Substitute 2 m for lDE and 2 m for lCE in Equation (I).

lCD=22+22=22m

Substitute 2 m for lDE and 3 m for lBE in Equation (II).

lBD=22+32=13m

Determine the cosθBD value.

cosθBD=lBElBD

Substitute 3 m for lBE and 13m for lBD.

cosθBD=313

Determine the cosθCD value.

cosθCD=lCElCD

Substitute 2m for lCE and 22 m for lCD.

cosθCD=222=12

Substitute 313 for cosθBD and 12 for cosθCD in Equation (IV).

TBDcosθBDTCDcosθCD=0TBD(313)TCD(12)=0TBD(313)=TCD(12)TBD=TCD(1332) (VII)

Substitute 40 kg for m and 9.81m/s2 for g in Equation (III).

W=40×9.81=392.4kgms2×1N1kgm/s2=392.4N

Determine the sinθBD value.

sinθBD=lDElBD

Substitute 2 m for lDE and 13m for lBD.

sinθBD=213

Determine the sinθCD value.

sinθCD=lDElCD

Substitute 2 m for lDE and 22m for lCD.

sinθCD=222=12

Substitute TCD(1332) for TBD, 213 for sinθBD, 12 for sinθCD, and 392.4 N for W in Equation (V).

TCD(1332)213+TCD12392.4=0TCD(232)+TCD(12)=392.4(12)TCD(23+1)=392.4532TCD=392.4

TCD=392.4×325TCD=332.96N

Substitute 332.96 N for TCD in Equation (VII).

TBD=332.96(1332)=282.96N

Substitute282.96 N for FBD, 13m for lBD, and 2 m for l0 in Equation (VI).

282.96=kBD(132)kBD=282.96(132)kBD=176N/m

Thus, the stiffness of the spring is 176N/m_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
In each case, determine the force P required to maintain equilibrium. The block weighs 100 lb.
The disk B has a mass of 20 kg and is supported on the smooth cylindrical surface by a spring with stiffness k= 400 N/m and unstretched length l0= 1 m. The spring remains in the horizontal position since its end A is attached to the small roller guide which has negligible weight. Determine the equilibrium angle of the roller.
Each spring has an unstretched length of 2 mm and a stiffness of k = 350 N/m. Determine the stretch in OA spring required to hold the 25-kg crate in the equilibrium position shown.  Determine the stretch in OB spring required to hold the 25-kg crate in the equilibrium position shown.

Chapter 3 Solutions

Engineering Mechanics: Statics & Dynamics (14th Edition)

Ch. 3.3 - Determine the magnitude and direction of F so...Ch. 3.3 - The bearing consists of rollers, symmetrically...Ch. 3.3 - The members of a truss are connected to the gusset...Ch. 3.3 - The gusset plate is subjected to the forces of...Ch. 3.3 - The man attempts to pull down the tree using the...Ch. 3.3 - The cords ABC and BD can each support a maximum...Ch. 3.3 - Determine the maximum force F that can be...Ch. 3.3 - The block has a weight of 20 lb and is being...Ch. 3.3 - Determine the maximum weight W of the block that...Ch. 3.3 - The lift sling is used to hoist a container having...Ch. 3.3 - A nuclear-reactor vessel has a weight of 500(103)...Ch. 3.3 - Determine the stretch in each spring for...Ch. 3.3 - The unstretched length of spring AB is 3 m. If the...Ch. 3.3 - Determine the mass of each of the two cylinders if...Ch. 3.3 - Determine the stiffness kT of the single spring...Ch. 3.3 - If the spring DB has an unstretched length of 2 m....Ch. 3.3 - Determine the unstretched length of DB to hold the...Ch. 3.3 - A vertical force P = 10 lb is applied to the ends...Ch. 3.3 - Determine the unstretched length of spring AC if a...Ch. 3.3 - The springs BA and BC each have a stiffness of 500...Ch. 3.3 - The springs BA and BC each nave a stiffness of 500...Ch. 3.3 - Determine the distances x and y for equilibrium if...Ch. 3.3 - Determine the magnitude of F1 and the distance y...Ch. 3.3 - The 30-kg pipe is supported at A by a system of...Ch. 3.3 - Each cord can sustain a maximum tension of 500 N....Ch. 3.3 - The streetlights A and B are suspended from the...Ch. 3.3 - Determine the tension developed in each cord...Ch. 3.3 - Prob. 30PCh. 3.3 - Prob. 31PCh. 3.3 - Prob. 32PCh. 3.3 - The lamp has a weight of 15 lb and is supported by...Ch. 3.3 - Each cord can sustain a maximum tension of 20 lb....Ch. 3.3 - Prob. 35PCh. 3.3 - Prob. 36PCh. 3.3 - Prob. 37PCh. 3.3 - Prob. 38PCh. 3.3 - The ball D has a mass of 20 kg. If a force of F =...Ch. 3.3 - The 200-lb uniform container is suspended by means...Ch. 3.3 - The single elastic cord ABC is used to support the...Ch. 3.3 - A scale is constructed with a 4-ft-long cord and...Ch. 3.3 - The concrete wall panel is hoisted into position...Ch. 3.3 - Prob. 2CPCh. 3.3 - Prob. 3CPCh. 3.3 - Prob. 4CPCh. 3.4 - Determine the magnitude of forces F1, F2, F3, so...Ch. 3.4 - Determine the tension developed in cables AB, AC,...Ch. 3.4 - Prob. 9FPCh. 3.4 - Prob. 10FPCh. 3.4 - Prob. 11FPCh. 3.4 - The three cables are used to support the 40-kg...Ch. 3.4 - Determine the magnitudes of F1, F2, and F3 for...Ch. 3.4 - If the bucket and its contents have a total weight...Ch. 3.4 - Determine the stretch in each of die two springs...Ch. 3.4 - Prob. 47PCh. 3.4 - Determine the tension in the cables in order to...Ch. 3.4 - Determine the maximum mass of the crate so that...Ch. 3.4 - Determine the force in each cable if F = 500 lb.Ch. 3.4 - Prob. 51PCh. 3.4 - Determine the tens on developed in cables AB and...Ch. 3.4 - If the tension developed in each cable cannot...Ch. 3.4 - Prob. 54PCh. 3.4 - Determine the maximum weight of the crate that can...Ch. 3.4 - The 25 kg flowerpot is supported at A by the three...Ch. 3.4 - If each cord can sustain a maximum tension of 50 N...Ch. 3.4 - Determine the tension developed m the three cables...Ch. 3.4 - Determine the tension developed in the three...Ch. 3.4 - Prob. 60PCh. 3.4 - Prob. 61PCh. 3.4 - If the maximum force in each rod con not exceed...Ch. 3.4 - Prob. 63PCh. 3.4 - If cable AD is tightened by a turnbuckle and...Ch. 3.4 - Prob. 65PCh. 3.4 - Prob. 66PCh. 3.4 - Determine the maximum weight of the crate so that...Ch. 3.4 - The pipe is held in place by the vise. If the bolt...Ch. 3.4 - Prob. 2RPCh. 3.4 - Prob. 3RPCh. 3.4 - Prob. 4RPCh. 3.4 - Prob. 5RPCh. 3.4 - Prob. 6RPCh. 3.4 - Determine the force in each cable needed to...Ch. 3.4 - If cable AB is subjected to a tension of 700 N,...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
Recommended textbooks for you
Text book image
International Edition---engineering Mechanics: St...
Mechanical Engineering
ISBN:9781305501607
Author:Andrew Pytel And Jaan Kiusalaas
Publisher:CENGAGE L
EVERYTHING on Axial Loading Normal Stress in 10 MINUTES - Mechanics of Materials; Author: Less Boring Lectures;https://www.youtube.com/watch?v=jQ-fNqZWrNg;License: Standard YouTube License, CC-BY