ENGR.MECH.:STAT.+DYNAMICS (LL)-W/ACCESS
ENGR.MECH.:STAT.+DYNAMICS (LL)-W/ACCESS
14th Edition
ISBN: 9780134228242
Author: HIBBELER
Publisher: PEARSON
bartleby

Concept explainers

bartleby

Videos

Textbook Question
Book Icon
Chapter 3.3, Problem 19P

Determine the unstretched length of DB to hold the 40-kg crate in the position shown. Take k = 180 N/m.

Chapter 3.3, Problem 19P, Determine the unstretched length of DB to hold the 40-kg crate in the position shown. Take k = 180

Expert Solution & Answer
Check Mark
To determine

The unstretched length of spring DB.

Answer to Problem 19P

The unstretched length (l0) of spring DB is 2.03m_.

Explanation of Solution

Given information:

The stiffness of the spring is 180N/m.

The mass of a crate is 40 kg.

Assumption:

Consider the point E in between the points B and C.

Show the free body diagram of the spring as in Figure 1.

ENGR.MECH.:STAT.+DYNAMICS (LL)-W/ACCESS, Chapter 3.3, Problem 19P

Determine the length of the member CD using the formula.

lCD=lDE2+lCE2 (I)

Here, the length of the point DE is lDE and the length of the point CE is lCE.

Determine the length of the spring BD using the formula.

lBD=lDE2+lBE2 (II)

Here, the length of the point BE is lBE.

Determine the weight of the crate.

W=mg (III)

Here, the mass of a crate is m and the acceleration due to gravity is g.

Determine the tension force of the member BD and CD by applying the equation of equilibrium.

Along the horizontal direction:

Fx=0TBDcosθBDTCDcosθCD=0 (IV)

Here, the tension force of the member CD is TCD and the angle for the member CD is θCD.

Along the vertical direction:

Fy=0TBDsinθBD+TCDsinθCDW=0 (V)

Determine the unstretched length of the spring BD.

FBD=kBDxBD=kBD(lBDl0) (VI)

Here, the tension force of the spring member BD is FBD and the un-stretched length of the spring BD is l0.

Conclusion:

Substitute 2 m for lDE and 2 m for lCE in Equation (I).

lCD=22+22=22m

Substitute 2 m for lDE and 3 m for lBE in Equation (II).

lBD=22+32=13m

Determine the cosθBD value.

cosθBD=lBElBD

Substitute 3 m for lBE and 13m for lBD.

cosθBD=313

Determine the cosθCD value.

cosθCD=lCElCD

Substitute 2m for lCE and 22 m for lCD.

cosθCD=222=12

Substitute 313 for cosθBD and 12 for cosθCD in Equation (IV).

TBDcosθBDTCDcosθCD=0TBD(313)TCD(12)=0TBD(313)=TCD(12)TBD=TCD(1332) (VII)

Substitute 40 kg for m and 9.81m/s2 for g in Equation (III).

W=40×9.81=392.4kgms2×1N1kgm/s2=392.4N

Determine the sinθBD value.

sinθBD=lDElBD

Substitute 2 m for lDE and 13m for lBD.

sinθBD=213

Determine the sinθCD value.

sinθCD=lDElCD

Substitute 2 m for lDE and 22m for lCD.

sinθCD=222=12

Substitute TCD(1332) for TBD, 213 for sinθBD, 12 for sinθCD, and 392.4 N for W in Equation (V).

TCD(1332)213+TCD12392.4=0TCD(232)+TCD(12)=392.4(12)TCD(23+1)=392.4532TCD=392.4

TCD=392.4×325TCD=332.96N

Substitute 332.96 N for TCD in Equation (VII).

TBD=332.96(1332)=282.96N

Substitute 282.96 N for FBD, 13m for lBD, and 180N/m for kBD in Equation (VI).

282.96=180(13l0)282.96180=(13l0)l0=131.572l0=2.03m

Thus, the unstretched length of spring DB is 2.03m_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
If the mass of cylinder C is 40 kg, determine the mass of cylinder A in order to hold theassembly in the position shown in the figure.
Help me please The homogeneous triangular plate has a mass of 12 kg. Plot the DCL of the plate for each set of supports shown in (a) to (d) and determine the number of unknowns.
The cylinder having a diameter 2.5 ft weighs 57 lb and is 6 ft long. Determine the reaction (lb.) at A neglecting friction. Determine the reaction at B (lb.) neglecting friction. Weight density of water is 62.4 lb/ft3 Sp.gr Gs = 1.6

Chapter 3 Solutions

ENGR.MECH.:STAT.+DYNAMICS (LL)-W/ACCESS

Ch. 3.3 - Determine the magnitude and direction of F so...Ch. 3.3 - The bearing consists of rollers, symmetrically...Ch. 3.3 - The members of a truss are connected to the gusset...Ch. 3.3 - The gusset plate is subjected to the forces of...Ch. 3.3 - The man attempts to pull down the tree using the...Ch. 3.3 - The cords ABC and BD can each support a maximum...Ch. 3.3 - Determine the maximum force F that can be...Ch. 3.3 - The block has a weight of 20 lb and is being...Ch. 3.3 - Determine the maximum weight W of the block that...Ch. 3.3 - The lift sling is used to hoist a container having...Ch. 3.3 - A nuclear-reactor vessel has a weight of 500(103)...Ch. 3.3 - Determine the stretch in each spring for...Ch. 3.3 - The unstretched length of spring AB is 3 m. If the...Ch. 3.3 - Determine the mass of each of the two cylinders if...Ch. 3.3 - Determine the stiffness kT of the single spring...Ch. 3.3 - If the spring DB has an unstretched length of 2 m....Ch. 3.3 - Determine the unstretched length of DB to hold the...Ch. 3.3 - A vertical force P = 10 lb is applied to the ends...Ch. 3.3 - Determine the unstretched length of spring AC if a...Ch. 3.3 - The springs BA and BC each have a stiffness of 500...Ch. 3.3 - The springs BA and BC each nave a stiffness of 500...Ch. 3.3 - Determine the distances x and y for equilibrium if...Ch. 3.3 - Determine the magnitude of F1 and the distance y...Ch. 3.3 - The 30-kg pipe is supported at A by a system of...Ch. 3.3 - Each cord can sustain a maximum tension of 500 N....Ch. 3.3 - The streetlights A and B are suspended from the...Ch. 3.3 - Determine the tension developed in each cord...Ch. 3.3 - Prob. 30PCh. 3.3 - Prob. 31PCh. 3.3 - Prob. 32PCh. 3.3 - The lamp has a weight of 15 lb and is supported by...Ch. 3.3 - Each cord can sustain a maximum tension of 20 lb....Ch. 3.3 - Prob. 35PCh. 3.3 - Prob. 36PCh. 3.3 - Prob. 37PCh. 3.3 - Prob. 38PCh. 3.3 - The ball D has a mass of 20 kg. If a force of F =...Ch. 3.3 - The 200-lb uniform container is suspended by means...Ch. 3.3 - The single elastic cord ABC is used to support the...Ch. 3.3 - A scale is constructed with a 4-ft-long cord and...Ch. 3.3 - The concrete wall panel is hoisted into position...Ch. 3.3 - Prob. 2CPCh. 3.3 - Prob. 3CPCh. 3.3 - Prob. 4CPCh. 3.4 - Determine the magnitude of forces F1, F2, F3, so...Ch. 3.4 - Determine the tension developed in cables AB, AC,...Ch. 3.4 - Prob. 9FPCh. 3.4 - Prob. 10FPCh. 3.4 - Prob. 11FPCh. 3.4 - The three cables are used to support the 40-kg...Ch. 3.4 - Determine the magnitudes of F1, F2, and F3 for...Ch. 3.4 - If the bucket and its contents have a total weight...Ch. 3.4 - Determine the stretch in each of die two springs...Ch. 3.4 - Prob. 47PCh. 3.4 - Determine the tension in the cables in order to...Ch. 3.4 - Determine the maximum mass of the crate so that...Ch. 3.4 - Determine the force in each cable if F = 500 lb.Ch. 3.4 - Prob. 51PCh. 3.4 - Determine the tens on developed in cables AB and...Ch. 3.4 - If the tension developed in each cable cannot...Ch. 3.4 - Prob. 54PCh. 3.4 - Determine the maximum weight of the crate that can...Ch. 3.4 - The 25 kg flowerpot is supported at A by the three...Ch. 3.4 - If each cord can sustain a maximum tension of 50 N...Ch. 3.4 - Determine the tension developed m the three cables...Ch. 3.4 - Determine the tension developed in the three...Ch. 3.4 - Prob. 60PCh. 3.4 - Prob. 61PCh. 3.4 - If the maximum force in each rod con not exceed...Ch. 3.4 - Prob. 63PCh. 3.4 - If cable AD is tightened by a turnbuckle and...Ch. 3.4 - Prob. 65PCh. 3.4 - Prob. 66PCh. 3.4 - Determine the maximum weight of the crate so that...Ch. 3.4 - The pipe is held in place by the vise. If the bolt...Ch. 3.4 - Prob. 2RPCh. 3.4 - Prob. 3RPCh. 3.4 - Prob. 4RPCh. 3.4 - Prob. 5RPCh. 3.4 - Prob. 6RPCh. 3.4 - Determine the force in each cable needed to...Ch. 3.4 - If cable AB is subjected to a tension of 700 N,...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
International Edition---engineering Mechanics: St...
Mechanical Engineering
ISBN:9781305501607
Author:Andrew Pytel And Jaan Kiusalaas
Publisher:CENGAGE L
EVERYTHING on Axial Loading Normal Stress in 10 MINUTES - Mechanics of Materials; Author: Less Boring Lectures;https://www.youtube.com/watch?v=jQ-fNqZWrNg;License: Standard YouTube License, CC-BY