2. The internal diameter of a boiler generating tube is 4in. and the wall thickness is 0.375 in. In operation the external surface film temperature is 26 Btu/hr.ft2.°F, the internal film coefficient is 1700 Btu/hr.ft². °F and a 0.375 in. thickness scale having a conductivity of 0.6 Btu/hr.ft. °F is deposited on the inner surface of the tube. The metal conductivity is 26 Btu/hr.ft. °F, the furnace gas temperature is 2100 °F and the temperature of the water is 500 °F, calculate (a) the overall coefficient of heat transfer for the clean tube, (b) the overall heat transfer coefficient including the effect of the scale, (c) the

2. The internal diameter of a boiler generating tube is 4in. and the wall thickness is 0.375 in. In operation the external surface film temperature is 26 Btu/hr.ft2.°F, the internal film coefficient is 1700 Btu/hr.ft². °F and a 0.375 in. thickness scale having a conductivity of 0.6 Btu/hr.ft. °F is deposited on the inner surface of the tube. The metal conductivity is 26 Btu/hr.ft. °F, the furnace gas temperature is 2100 °F and the temperature of the water is 500 °F, calculate (a) the overall coefficient of heat transfer for the clean tube, (b) the overall heat transfer coefficient including the effect of the scale, (c) the

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

48. Water is flowing in a smooth pipe of diameter D. A section of this pipe hav- ing a length of L is heated. Water at the inlet to the heated section has a tempera- ture of Tŋ. Water temperature at the exit of the heated section is Tp. The heated section of the pipe wall is maintained at a constant heat flux so that a constant temperature difference of AT, = T, – T, exists between the wall and the bulk wa- ter temperature. Show that for turbulent flow in the pipe and a specified heated length and pipe diameter, water temperature at the exit of the heated section is given by: 402 0.6 Pr T52 =Tf +0.0876 L AT DO.8 0.2 m
A chromel–constantan thermocouple measuring the temperature of a fluid is connected by mistake with copper–constantan extension leads (such that the two constantan wires are connected together and the copper extension lead wire is connected to the chromel thermocouple wire). If the fluid temperature was actually 250 C and the junction between the thermocouple and extension leads was at 90 C, what e.m.f. would be measured at the open ends of the extension leads if the reference junction is maintained at 0 C? What fluid temperature would be deduced from this (assuming that the connection error was not known)?
a. An air stream passing through a 2-inch (1/6 ft) diameter, thin-walled tube is to be heated by high- pressure steam condensing on the outer surface of the tube at 320 °F. The overall heat transfer coefficient, h between steam and air can be assumed to be 25 Btu/(ft2.hr °F) with the air entering at 100 ft/sec, 10 psia, 40 °F. The air is to be heated to 150 °F. Determine the tube length required. Assuming Rayleigh Line flow, calculate the static pressure change due to heat addition. Also, for the same inlet conditions, calculate the pressure drop due to friction, assuming Fanno flow in the duct with f = 0.018. b. c. d. To obtain an approximation to the overall pressure drop in this heat exchanger, add the two results. Discuss the accuracy of this calculation.
For Heat transfer through cylinder tube wall, the temperature is to be a linear function of r (radius) of the tube. Select one: O True O False The conductivity of H20 in solid form (ice) is higher than that of H20 in liquid form (water). Select one: O True O False F, (Correction factor for temperature in some heat exchangers) should be 1.0 or greater than 1.0 in some cases. Select one: O True False
AS& Heat Transfer in Steam Heater Water at an average of 70°F is fiowing in a 2-in. steel pipe, schedule 40. Steam at 220°F is condensing on the outside of the pipe. The con vective coefficient for the water inside the pipe is A = 500 btu/h ft2.°F and the con- densing steam cocfficient on the outside is h = 1500 (a) Calculate the heat loss per unit length of1 ft of pipe using resistances. (b) Repcat, using the overall based on the inside area Ap (c) Repeat, using U 13.2- Ans. (a)q= 26 710 btu/h (7.828 kW). (b) Uj = 329.1 btu/h-ft2."F (1869 W/m2. K), (c) U.= 286.4 btu/h ft2.°F (1626 W/m2. K)
Answer this ASAP The diameter of the tube is 25 mm. The specific heat of water is 4.18 kJ/kg.°C. The overall heat transfer coefficient is 0.7 kW/m².°C. 1. Schematic of temperature distribution 2.ΔTLMTD 3.Actual heat transfer rate 4.Cmin 5.Maximum heat transfer rate
A Horizontal Return Fire-Tube Boiler in 60 inches in diameter, 16 ft long, has 70 tubes that are 3 inches O.D with 0.109-inch tube thickness. If was found that the boiler’s steam rate is 0.50 kg/s and the factor of evaporation is 1.25. What is the Percent (%) Rating of the Boiler?
A Thomas meter is located in an air duct of 2 sq ft cross-sectional area. The air weighs 0.083 lb per cu ft, and its specific heat is 0.24. Assume a controlled temperature differential of 5° and heater potential of 110 volts. Plot the velocity as abscissa and amperage as ordinate for veloc- ity 0 to 300 ft per min. Assume constant amperage of 3, and plot tem- perature difference against velocity. Discuss the curves from the stand- point of accuracy of the system.
3. Solar radiation heats the surface after sunrise, and the resulting heat flux F to the atmosphere is approximated by 2T(t – tnoon) F = F cos 6 a.m. < t< 6 p.m. max At
6- The following reading were taken during a test on a surface condenser: Mean condenser temperature = 35°C Hot well temperature = 30°C Condenser vacuum = 69 cm Hg Barometer reading = 76cmHg Condensation rate = 16 kg/min Cooling water temperature inter = 20 °C Cooling water temperature outlet = 32.5 °C Flow rate being = 37500 kg/h Calculate: a- mass of air present per cubic meter of condenser b- quality of steam at condenser inlet c- vacuum efficiency d- condenser efficiency (condenser heat transfer effeteness)
High-pressure steam condenses at 400 K on the outer surface of a thin-walled tube of 50 mm diameter. The overall heat transfer coefficient between steam and air on the inside of the tube is 200 W/m?. If the air enters the tube at 25 m/s, 150 kPa and 280 K, find the length of the tube required for the air to be heated to 350 K. [Ans. L = 13.9 m]
Saturated steam at 3 atm will flow through a 3 in. Schedule 80 steel pipe. In order todecrease the heat losses to the surrounding air (at 20 oC) the pipe will be insulated. There are twotypes of insulating materials available, each with a thickness of 2.5 cm. Thermal conductivity ofinsulator A is 0.04 W/m.K and that of insulator B is 0.20 W/m.K. Both insulators will be used, inorder to have the least heat loss. Which insulator should be covered outside? Assume thatconvective heat transfer coefficient between the insulated pipe and air is 15 W/m2K.