Code: COFFEE. A single-core cable has a conductor diameter of 13.5 mmand insulation thickness of 8.2 mm. Given the specific resistance of theinsulating material as 7.5E10^8 Megaohms-cm, calculate the insulation perTuarter-kilometer of the cable in Megachms.If the thickness of the insulating material in the problem with codeCOFFEE is increased by 30%, what will be the new insulation resistance ofthe cable? Answer in Megaohms. *

Given: diameter of cable d= 13.5 mmthickness of insulation t = 8.2 mmρ = 7.5*108 MΩ-cmL=14km

Code: COFFEE. A single-core cable has a conductor diameter of 13.5 mm and insulation thickness of 8.2 mm. Given the specific resistance of the insulating material as 7.5E10^8 Mogaohmo-cm, calculate the insulation per nuarter-kilometer of the cable in Megachms. If the thickness of the insulating material in the problem with code COFFEE is increased by 30%, what will be the new insulation resistance of the cable? Answer in Megaohms. *

Code: COFFEE. A single-core cable has a conductor diameter of 13.5 mm and insulation thickness of 8.2 mm. Given the specific resistance of the insulating material as 7.5E10^8 Mogaohmo-cm, calculate the insulation per nuarter-kilometer of the cable in Megachms. If the thickness of the insulating material in the problem with code COFFEE is increased by 30%, what will be the new insulation resistance of the cable? Answer in Megaohms. *

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Calculate the specific conductivity of the conductor in Mega(Ωm)-1 since the current passing through a conductor with a cross-section (1.00nm x 1.00µm), length of 10.00mm, is 1.00mA and the voltage value falling on it is 1.00V.
Two cities separated by 10,000 ft is connected by telephone wires whose thermal coefficient of resistance at 25oC is 0.003/Co . If the resistance of the wire at 45oC is 612 Ω, what would be its resistance at 25oC?
What is the resistance of a copper bus bar 9.15 meter long and 7.62 cm by 1.27 cm in cross section? Use 1.78 μΩ-cm specific resistance for copper.
What is the resistivity of a wire if it is subiected to a 2.50 X 102 V/m electric field, and has a current density of 4.03X10-13 A/m2??
What is the resistance (in Ohms) of a wire made of a material with a resistivity of 4.6× 10-8Ω⋅ m if its length is 2.9 m and its diameter is 0.76 mm?
The copper has resistivity of 1.7x10^-8 ohm * meter. What is the resistance of a piece of copper wire with length of 3.2 centimeters and cross sectional area of 2.25 x 10^3 m^2?
Calculate the resistance of a copper wire with a diameter of 2.5968 mm having a length of 1000 m at 20 Celsius.
The electrical resistance in ohms of a certain thermometer varies with temperature according to the approximate law :R = Ro [1 + α (T – To )]The resistance is 101.6 Ω at the triple-point of water 273.16 K, and 165.5 Ω at the normal melting point of lead (600.5 K). What is the temperature when the resistance is 123.4 Ω?
In the electric flow, it is found that the resistance (measured in the units called ohms) offered by a fixed length of wire of a given material varies inversely as the square of the diameter of the wire. If a wire 0.01 in. In diameter has a resistance of 0.332 ohms, what is the resistance of a wire of the same length and material with diameter 0.0260?
If 1.85 miles of 24-gauge copper wire has a resistance of 1.47 kΩ and the resistivity of copper is 1.7 × 10-8Ω⋅ m, what is the diameter of the wire in meters? (1 mile = 1609 m)
When a 30.0V battery is connected to a wire 50.0m in length with a resistivity of 2.25x10-7 Ωm. If a current of 2.50A flows through the wire, what is the diameter of the wire in millimeters?
The wire segment shown below is made of copper with a length of 300.0 m, across sectional area of 4.1 x 10-6 m2 and a resistivity of 3.4 x 10‑8 Ohm-m. What is the resistance of this wire segment?