Consider water (at a temperature of 276 K ) flowing inside a cylindrical pipe, having a diameter of 0.1 m and a thin wall. Under specific circumstances, temperature at the wall of the pipe reaches 258 K that helps form a layer of ice on the inner side of the wall of the pipe. Temperature and convection heat transfer coefficient at the inner surface of the ice layer are 273 K and 1500m2⋅Kw, respectively. Determine how thick the ice layer should be?

Consider water (at a temperature of 276 K ) flowing inside a cylindrical pipe, having a diameter of 0.1 m and a thin wall. Under specific circumstances, temperature at the wall of the pipe reaches 258 K that helps form a layer of ice on the inner side of the wall of the pipe. Temperature and convection heat transfer coefficient at the inner surface of the ice layer are 273 K and 1500m2⋅Kw, respectively. Determine how thick the ice layer should be?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter6: Forced Convection Over Exterior Surfaces

Section: Chapter Questions

Problem 6.4P: An electrical transmission line of 1.2-cm diameter carries a current of 200 amps and has a...

See similar textbooks

Similar questions

An electrical transmission line of 1.2-cm diameter carries a current of 200 amps and has a resistance of 310-4 ohm per meter of length. If the air around this line is at v, determine the surface temperature on a windy day, assuming a wind blows across the line at 33 km/h.
Consider a person who is trying to keep cool on a hot summer day by turning a fan on and exposing his entire body to air flow. The air temperature is 85°F and the fan is blowing air at a velocity of 6 ft/s. If the person is doing light work and generating sensible heat at a rate of 300 Btu/h, determine the average temperature of the outer surface (skin or clothing) of the person. The average human body can be treated as a 1-ft-diameter cylinder with an exposed surface area of 18 ft2. Disregard any heat transfer by radiation. What would your answer be if the air velocity were doubled? Evaluate the air properties at 100°F.
Air at 300 degrees Celsius flows over a plate of dimension 0.5 m by 0.25 m. If the convection heat transfer coefficient is 250 Watts per Sq.m Kelvin, determine the heat transfer rate from the air to one side of the plate if the plate is to be maintained at 40 degrees Celsius.
Consider laminar flow of air across a hot circular cylinder. At what point on the cylinder will the heat transfer be highest? What would your answer be if the flow were turbulent?
. Castor oil at 36 °C flows over a 6 m long and 1 m wide heated plate at 0.06 m/s. For a surfacetemperature of 96 °C, determine (i) the thermal boundary layer thickness at the end of the plate,(ii) the local heat transfer coefficient at the end of the plate, and (iii) the rate of heat transfer fromthe entire plate
A 40-cm-long, 800-W electric resistance heating element with diameter 0.5 cm and surface temperature 120°C is immersed in 75 kg of water initially at 20°C. Determine how long it will take for this heater to raise the water temperature to 80°C. Also, determine the convection heat transfer coefficients at the beginning and at the end of the heating process.
A heating system is to be designed to keep the wings of an aircraft cruising at a veloeity of 900 km/h above freezing temperatures during flight at 12.200-m altitude where the standard atmospheric conditions are -55.4°C and 188 kPa. Approximating the wing as a cylinder of elliptical cross section whose minor axis is 30 cm and disregarding radiation, determine the average convection heat transfer coefficient on the wing surface and the average rate of heat transfer per unit surface area.
If we neglect radiative heat transfer, what is the appropriate heat transfer coefficient value for stagnant ambient air?
A 5-m-wide, 4-m-high, and 40-m-long kiln used to cure concrete pipes is made of 20-cm-thick concrete walls and ceiling (k = 0.9 W/m · °K). The kiln is maintained at a surface temperature of 40°C. Determine the rate of heat loss from the kiln when the outside surface temperature is -4°C
Water is to be heated from 10°C to 80°C as it flows through a 2-cm-internal-diameter, 13-m-long tube. The tube is equipped with an electric resistance heater, which provides uniform heating throughout the surface of the tube. The outer surface of the heater is well insulated, so that in steady operation all the heat generated in the heater is transferred to the water in the tube. If the system is to provide hot water at a rate of 5 L/min, determine the power rating of the resistance heater. Also, estimate the inner surface temperature of the pipe at the exit.
When is the heat transfer through a fluid conduction and when is it convection? For which case is the rate of heat transfer higher? How does the convection heat transfer differ from the thermal conductivity of the fluid?
Hi, can you help me to answer this question using the first law of thermodynamics formula to explain this event? On a hot summer day, a student turns his fan on when he leaves his room in themorning. When he returns in the evening will the room be warmer or cooler than theneighborouing rooms ? Explain your answer using the first law of thermodynamics.Assume ALL doors and windows are kept closed.