Example 4.5: Stem expands in a turbine from 25 bar and 300°C to acondenser pressare of 20 KPa. Evaluate the Rankine cycle efficiency. What is theefficiency if the initial tempprature of steam is 500°C instead of 300°C ? Nowif the boiler pressure is increased to 60 bar maintaining the steam temperature atturbine inlet at 500°C, calculate the efficiency. Assume the condenser pressureto rmain constant in all the cases.n-25 bar

Draw the TS diagram for a better understanding of the problem. Since process 1-2 is isentropic…

Example 4.5: Steam expands in a turbine from 25 condenser pressare of 20 KPa. Evaluate the Rankine cycle efficiency. What is the efficiency if the initial temperature of steam is 500°C instead of 300°C ? Now if the boiler prcssure is increased to 60 bar maintaining the steam temperature at turbine inlet at 500°C, calculate the efficiency. Assume the condenser pressure to rmain constant in all the cases.

Example 4.5: Steam expands in a turbine from 25 condenser pressare of 20 KPa. Evaluate the Rankine cycle efficiency. What is the efficiency if the initial temperature of steam is 500°C instead of 300°C ? Now if the boiler prcssure is increased to 60 bar maintaining the steam temperature at turbine inlet at 500°C, calculate the efficiency. Assume the condenser pressure to rmain constant in all the cases.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

When a steam boiler generates saturated steam at 2.5 mpa and the condenser pressure is 20 kpa, what is the Rankine cycle efficiency?Show complete step-by-step process and solution.
In a marine gas turbine unit, a high-pressure stage turbine drives the compressor and a low-pressure stage turbine drives the propeller through suitable gearing. The overall pressure ratio is 4/1 and the maximum temperature is 650 o the isentropic efficiencies of the compressor, H. P. turbine, L. P. turbine are 0.8, 0.83 and 0.85 respectively and the mechanical efficiency of both shafts is 98 %. Sketch the process on the T-s diagram i. Calculate the pressure between turbine stages when the air intake conditions are 1.01 bar and 25 oC. ii. Calculate also the thermal efficiency and the shaft power when the mass flow is 60 kg/s. NB: Neglect kinetic energy changes and the pressure loss in combustion.
0.2 m'af an ideal gas at 200 "K and 2 har is cumpressed at constant volume to 4 har by heat addition. Then it is compressed adiabatically to 8 har, finally it expands isothermally to the initial point.Assume ep= 14.3 kkg K and ev= 10.2 kIkg K. 1- Draw pv diagram of the cycle. 2. Find the heat added of the constant vuhume proces. 3. Find the work of the adiabatic proces 4 Find the heat rejected and work of the isothermal process.
The condensing pressure for a Rankine Engine is 1.6 bar. 200°C and the steam at the beginning of expansion is at 3.75 Mpa, 400°C. Calculate the efficiency of cycle and engine using mollier chart. Can you show me the detailed step by step solution?
Steam is generated at 4.10 Mpa and 440°C and condensation occurs at 0.105 MPa a. For a Rankine engine operating between these limits, computethe thermal efficiency and the heat rate b. Considering that a Rankine cycle occurs between same limits, determine QA, QR, Wnet and eth c. What mass flow rate is required for a net output of 30 000 kW Don't answer the given problem, just give me the schematic diagram and t-s diagram of the given problem
3- A reaction turbine is supplied with steam at (60 bar, 600 C°). The condenser pressure is (0.07 bar). If the reheat factor can be assumed to be (1.04) and the stage efficiency is constant throughout at (80%). Calculate the steam flow required in (ton/hr) for a diagram power of (25 MW). (Ans. 75.6 ton/hr) The ctoam ntion at full load for a 12 MWV) turbine ic (1 S 6 ton /brl At balf lead the
Thank you
A turbine is supplied with steam at 25 BAR, 42C and exhaust into a condenser at 55 KPa. Find the thermal efficiency of the cycle. Draw the schematic and T-S diagrams with corresponding labels. (Clear handwritten and step by step solution)
Given • isentoopie efficiency of the turbine isentropie · To find 86 and 91% If Dolynesi toraction Shoud not 86%. " of Pump = 91% Boiler = at State 6 be more than 1%. 1% Thermal efficiency of Puant 2 MPa (Pump 13 MPa, 600 C Turbine Condenser
A 300 MW steam power plant, according to the simple ideal Rankine cycle references Water vapor enters the turbine at a pressure of 10 MPa and a temperature of 500°C; 10 KPA expands to condenser pressure.Isanthropic of turbine and pumpaccording to the efficiency of 85%, the degree of dryness of steam at the turbine output, find the thermal efficiency of the cycle and the mass flow of water vapor circulating in the cycle.
please provide the solution with detailed steps use baryton cycle principle to calculate
Steam engine with incomplete expansion receives saturated steam at 1.04 Mpa,expands it to 0.105 Mpa where release occurs. Exhaust is to a condenser at 40C.The actual engine uses 6070 kg/h of steam; it has a brake engine efficiency of 60%and a mechanical efficiency of 85%. The electric generator which it drives has anefficiency of 925. (a) For the ideal engine, find the thermal efficiency and the mep.For the actual engine, determine (b) the brake work in kW and the brake thermalefficiency, (c) the indicated work in kW, indicated thermal efficiency and indicatedsteam rate, (d) the combined thermal efficiency and the combined steam rate