60 min24 mmQ1// Determine the principles strainfor the point (A) of the bar which 32 nmmthat is under three forces as shown in180 mm40 mm750 N16 mm30 mm500 Nthe figure.1 kN

given; axial force in x-direction(Fx)=1KN (tensile)…

Answered: 60 min 24 mm 180 mm O1// Determine the…

60 min 24 mm 180 mm O1// Determine the principles strain for the point (A) of the bar which 32 mm that is under three forces as shown in 40 mm 750 N 16 mm 30 mm 500 N the figure. 1 kN

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter7: Analysis Of Stress And Strain

Section: Chapter Questions

Problem 7.7.1P: An element of material in plain strain has the following strains: x = 0.001 and y = 0.0015. (a)...

See similar textbooks

Related questions

Q: Q2/ Find the equivalent spring constant and equivalent mass of the system shown in figure (1) w…

Q: bolt tension force is 85% of its capacity. Use LRFD. cach) with a bolt spacing and gage distance of…

A: No of bolts = 8 Bolt dia d = 22 mm Bolt hole dia do = 25 mm Pitch distance p = 100 mm Gauge distance…

Q: Calculate the change in entropy of air, if it 5 bar, 27°C throttled from to 2 bar adiabatically.

A: Throttling is a constant enthalpy irreversible adiabatic process which results in expansion of…

Q: Write the shear and moment equations and draw the shear and moment diagram:

Q: -80 kN/m |B 2 m 2 m FIG. P4.11

A: Let the top point of the load be represented as "D" (as shown in below figure). Total load which is…

Q: Describe what is done in the combustion process in the combustion chamber of a gas turbine to…

A: The compression system of a gas turbine engine feeds high-pressure air to the combustor or…

Q: 3 m 0.45 m 4 kN If 0 = 45°, determine the moment produced by the 4 kN force about point A and If the…

Q: The steel shaft is formed by attaching a hollow shaft to a solid shaft. Determine the shear stress…

Q: Circle on the statements which is NOT correct, then correct it with explain. A-) Lumped systems more…

Q: 2 kips 4 kips D. 7B 2 ft - - 6 ft- - 4 ft FIG. P4.15

Q: 34" C: 57 "radius 150 7. Figure P4-2

A: The instant center of rotation (also, instantaneous velocity center, instantaneous center, or…

Q: The following system is in equilibrium. Draw the free-body diagram of the frame and apply the…

Q: the image below, if acceleration at point B is 8m/s ⦫ 45o, and the angular velocity of BC is 2√2…

A: Option a is correct.

Q: Q-2: The woman exercises on the rowing machine. If she exerts a holding force of F = 350 N handle…

Q: x(t) M = 1 kg K, K, = 5 N/m fy = 1 N-s/m f(t) = u(t)N -f(t) for

Q: 1200 N 0.8 m D. 0.6 m 0.6 m 0.6 m FIGURE E4-8(1) The magnitude of the force transmitted thru Pin-E…

A: Diameter at pin E, DE= 16 mm= 0.016 m Diameter at pin D, DD= 12 mm= 0.012 m

Q: A bag of laundry resting on a chair shown in (a) applies forces on the chair as shown in (b) where…

A: the reaction at G and the 26 N forces are internal forces and will not be included in the FBD

Q: Q3:the shaded area shown in the figure find Moment of Inertía With respect to the Xasis 2cm 10 cm-

Q: For the system shown in the figure: 1) Find the response in steady state when a force is applied at…

Q: These are CERAMICS except Aluminium Aluminium carbide Aluminium oxide Aluminium nitride Aluminium…

A: Ceramics: Ceramics are neither metallic nor organic. They are hard, brittle and corrosive…

Q: A spherical vessel with inner diameter of 1m (1.1m outside diameter) contains exothermic reaction…

Q: period of time. After some modifications in the speed of the rotation for the Ferris wheel, your…

Q: 1.A carpenter builds an exterior house wall with a layer of wood 3.0 cm thick on the outside and a…

A: Given Data: The thickness of the wood, 3.0 cm The thickness of Styrofoam, 2.2 cm Thermal…

Q: Looking at a similar thin plate to the previous questions. The thin plate ABCD has a mass of 7.6 kg…

A: When an amount of pull or the push applied on the object, it has the tendency to change the state of…

Q: An industrial equipment manufacturing factory needs a 1.5m long shaft that can deliver 75kW @…

A: Given data Length of shaft = 1.5 mPower delivered = 75 kWSpeed = 600 rpmFactor of safety = 2.5For…

Q: m diameter is fixed fre m and 2 m from the natural frequency of shaf ig 11 CNm2

Q: The figure shows a rigid bar that is supported by a pin at A and two rods, one made of steel and the…

Q: Q.1 In a steam power plant located in Baghdad, the steam passes adiabatically and steadily through a…

Q: g to practice this problem using a checker online, but everytime I recalculate my answer it always…

A: D = dia of pipe = 0.1m +> radius of pipe = 0.05 m Roughness height k = 0.0013 m length ofpipe =…

Q: Q12. How would a creep profile on a brittle material looks like?

A: How would be creep profile on a brittle material.

Q: As a crystalline material is heated-up it experiences the following structural changes. Select one:…

Q: Circle on the statements which are NOT correct, then correct it with explain. A-) Fins are…

A: (A) Fins are preferred to be fixed on the liquid side rather than the gas side to increase heat…

Q: ky = 4.9 kN/m I. Determine the magnitude of force acting on the beam from spring A. il. Determine…

Q: 100 KN R=KN-m Q=KN 400 KN 1.0 m P=KN 1.0 m 3 Z=KN

A: Vertical component of P, Pv=P*Cos(theta),. Where theta is the angle made to vertical axis in…

Q: CX a) Investigate whether the function represents the velocity potential x²+y2 of a particular…

A: Write the expression of the function. ϕ=cxx2+y2 Partially differentiate the above function with…

Q: Determine the coordinates of the centroid of the shaded area shown. Also, determine the volume of…

A: Given: To Find: 1. Coordinate of centroid. 2. Surface area 3. Volume

Q: The water vapor enters a throttling valve with a mass flow rate of 2.7 kg/s, a temperature of 280 °C…

A: Given that: mass flow rate = 2.7 kg/s .Inlet conditions are: T1 = 280 oC, P1 = 30 bar Outlet…

Q: A train mechanical system shown in Figure 1, consist of engine draw a car moving in one direction.…

Q: A screw jack mechanism is to be incorporated into the machine as part of a levelling system. The…

A: Given Pitch, P = 6 mm Mass, m = 500 kg Coefficient of…

Q: A pulley 1.2 m in diameter and supporting a load of 900 N is mounted at B on a horizontal beam…

Q: In a cooling system of a 12MW power plant has a cooling capacity of 3750 m3/hr. Water enters at 45°C…

A: Water inlet temperature, ti = 45°C Water exit temperature, te = 32°C Wet bulb temperature of air,…

Q: 12 kips 4 kips B 2 ft- 6 ft 4 ft

A: To draw the shear and bending moment diagram for the given question, first we need to determine the…

Q: A relative airflow of 100 ft/s is flowing round the cylinder which has a diameter of 2 ft, and a…

Q: A spherical vessel with inner diameter of 1m (1.1m outside diameter) contains exothermic reaction…

Q: 1. Consider a damped spring-mass system with m = 1kg, k = 4 kg/s^2 and b = 5 kg/s. a. Write the…

Q: From the following data, determine: a) The power of the turbine. b) The input heat flux. c) Thermal…

A: Disclaimer: “Since you have posted a question with multiple sub-parts, we will solve first three…

Q: This maintenance practice is based on the idea of "run till it breaks". That means corrective…

A: Corrective maintenance is generally reactive in nature. Every time product or system fails , repair…

Q: Identify the portion of a foot (12") as indicated by the reading from the zero mark (0) on the…

A: we have to denote sections of scale

Q: The bolted connection carries a load as shown. What is the minimum size of the bolt if the allowable…

Q: mass weighing 3 lb stretches a spring 3 in. If the mass is pushed upward, contracting the spring a…

A: m = 3/32 kg k = 3*4 = 12 F(t)=0

Concept explainers

Strain energy

The term strain indicates the variation in an object's length, area, and volume when the object is subjected to an external force. The external force may be of normal, shear, moment, torque, etc. The strain in an object depends on the types of external force and cross-section of the object. Mathematically, the evaluation of strain can be obtained with the help of elastic constants.

Question

60 min
24 mm
Q1// Determine the principles strain
for the point (A) of the bar which 32 nmm
that is under three forces as shown in
180 mm
40 mm
750 N
16 mm
30 mm
500 N
the figure.
1 kN

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

An element of material in plain strain is subjected to strains x = 0.0015, , y . = -0.0002, and xy = 0.0003. (a) Determine the strains for an element oriented at an angle = 20°. (b) Determine the principal strains of the element. Confirm the solution using Mohr’s circle for plane strain.
- 7.2-26 The strains on the surface of an experiment al device made of pure aluminum (E = 70 GPa. v = 0.33) and tested in a space shuttle were measured by means of strain gages. The gages were oriented as shown in the figure. and the measured strains were = 1100 X 106, h = 1496 X 10.6, and = 39.44 X l0_. What is the stress o in the x direction?
An element of material in plain strain is subjected to shear strain xy = 0.0003. (a) Determine the strains for an element oriented at an angle = 30°. (b) Determine the principal strains of the clement. Confirm the solution using Mohr’s circle for plane strain.
An element of material in plain strain has the following strains: x = 0.001 and y = 0.0015. (a) Determine the strains for an element oriented at an angle = 250. (b) Find the principal strains of the element. Confirm the solution using Mohr’s circle for plane strain.
An clement of material in plane strain (see figure) is subjected to strains ex= 480 × 10-6, Ey= 70 × l0-6, and yxy= 420 × l0-6. Determine the following quantities: (a) the strains for an element oriented at an angle 0 = 75°, (b) the principal strains, and (c) the maximum shear strains. Show the results on sketches of properly oriented elements.
A prismatic bar in tension has a length L = 2.0 m and cross-sectional area A =249 mn2. The material of the bar has the stress-strain curve shown in the figure. Determi ne t he elongation 5 of the bar for each of the following axial loads: P = 10 kN, 20 kN, 30 kN, 40 kN. and 45 kN. From these results, plot a diagram of load P versus elongation 5 (load-displacement diagram).
5 decimal places Determine the total strain (mm/mm) of a 2.64-m bar with a diameter of 21 mm subjected to a tensile force of 71 kN at a temperature increase of 49 C°. Consider the α=27.3 µm/mC° and E = 122 GPa.
7) The strain of a component, which has a tensile modulus of 4 X 105 MPa, and subjected to a stress of 6000KPa, is a. 0.000015 b. 0.00015 c. 0.00003 d. 0.003
A Mild steel rod of 15mm diameter that is 1.5 cm in length is elongated by 0.15mm along its longitudinal direction by a load of 15 kN. Hence, the strain of the material is …………….. mm/mm.
A rail 5 m in length having a coefficient of linear expansion of 11.6 x 10-6 m/m C increases its length when heated from 25 C to 50 C. Determine the strain.
2.Show that volumetric strain in a bar is equal to the sum of strains in three mutually perpendicular directions. 3. Explain the terms: (i) Modulus of elasticity (ii) Modulus of rigidity and (ii) Bulk modulus. 4. Derive the relationship between (i) Modulus of elasticity and modulus of rigidity (ii) Modulus of elasticity and bulk modulus
A stepped circular bar having diameter 20 mm, 15 mm and 10 mm over axial lengths of 100 mm, 80 mm and 60 mm, respectively, is subjected to an axial tensile force of 5 kN.If E = 100×103 N/mm2and Poisson’s ratio v = 1/m = 0.32 for the material of the bar, determine a) Total change in length.b) Change in each diameter.