1. A geothermal heat pump with a COP of 1.3 provides 48000 BTU/hr of heat to a building. Assuming an electrical power rate of $0.20/kWh. answer the following questions for this system: a. What would be the monthly cost to provide heat at a rate of 48000 BTU/hr if the heat was delivered by a simple electrical resistance heater? b. How much heat is drawn from the ground by the heat pump in that month, in kWh? c. What is the savings per month enjoyed by operating this heat pump for a month vs. a simple electrical resistance heater?

1. A geothermal heat pump with a COP of 1.3 provides 48000 BTU/hr of heat to a building. Assuming an electrical power rate of $0.20/kWh. answer the following questions for this system: a. What would be the monthly cost to provide heat at a rate of 48000 BTU/hr if the heat was delivered by a simple electrical resistance heater? b. How much heat is drawn from the ground by the heat pump in that month, in kWh? c. What is the savings per month enjoyed by operating this heat pump for a month vs. a simple electrical resistance heater?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter8: Natural Convection

Section: Chapter Questions

Problem 8.46P

See similar textbooks

Similar questions

If 14 gpm of water is flowing through an open-loop heat pump with a temperature difference of 7F, how much heat in Btu/h is being absorbed or rejected in the heat pump? Show all work and units.
How many Btu/h would be produced in a 12-kW electricheater?
The operating condition for the single compressor in a household refrigerator is the lowest box temperature, which is typically A. 0F B. -20F C. 20F D. 40F
Refrigerators currently being manufactured in the United States are using______as their refrigerant.
A heat pump with a COP of 3.2 is used to heat a perfectly sealed house (no air leaks). The entire mass within the house (air, furniture, etc.) is equivalent to 1200 kg of air. When running, the heat pump consumes electric power at a rate of 5 kW. The temperature of the house was 7°C when the heat pump was turned on. If heat transfer through the envelope of the house (walls, roof, etc.) is negligible, the length of time the heat pump must run to raise the temperature of the entire contents of the house to 22°C is (a) 13.5 min (b) 43.1 min (c) 138 min (d) 18.8 min (e) 808 min
Assume you purchase a new heat pump rated at 3 Refrigeration Tons [RT] and you estimate to use the heat pump for 13 hours per day [h/d] during the month of April (30 days), at a cost of $0.11 per kilowatt-hour [$/(kW h)]. What is the total cost, in dollars [$], to operate the heat pump in the month of April?
Question 1 A Carnot heat pump is to be used to heat a house and maintain it at 25°C in winter. On a day when the average outdoor temperature remains at about 2°C, the house is estimatedto lose heat at a rate of 55 000 kJ/h. If the heat pump consumes 4.8 kW of power while operating, determine:The COP, heat loss for the day, required work input, how long the heat pump ran on that dayThe total heating costs, assuming an average price of R 2.35/kWh for electricity, andThe heating cost for the same day if resistance heating is used instead of a heat pump
A gasoline truck engine takes in 10,000 J of heat and delivers 2,000 J of mechanical work per cycle. . What other machines utilize the concept of heat engine in its operation? Give at least 3 examples.
PROBLEM 2A household refrigerator has a coefficient of performance of 3 and requires a net powerinput of 0.8 kW. Question:(a) Determine the rate of heat transfer removed from the refrigerated space.(b) Determine the rate of heat transfer discharged from the refrigerator to thesurrounding kitchen.(c) Determine the annual cost in $ for supplying power to the refrigerator assuming24/7 operation and a cost of 12 cents per kWh.
A heat pump is used to extract heat from the outside atmosphere to heat the inside of a building. On a day when the outside air temperature is Tc°C, the heat pump is operating to a COP of 3.7, maintaining the inside temperature of the building at Th°C. If the building is losing heat at the rate of 53,709 kJ/hour in these conditions, determine how much power (kW) must be supplied to a heat pump? Keep two decimal places
14. Calculate the net work output of a heat engine following path ABCDA in the figure below.
What is the best coefficient of performance for a heat pump that has a hot reservoir temperature of 50.0ºC and a cold reservoir temperature of −20.0ºC? (b) How much heat transfer occurs into the warm environment if 3.60 × 107 J of work (10.0 kW · h) is put into it? (c) If the cost of this work input is 10.0 cents/kW · h, how does its cost compare with the direct heat transfer achieved by burning natural gas at a cost of 85.0 cents per therm. (A therm is a common unit of energy for natural gas and equals 1.055 × 108 J.)