1.1A 50 kg cement block needs to be moved, over a distance of 10m, the power available is 200 W, whilethe block accelerates at 5 m/s? when this power is applied.1.1.1 Determine the work it would take to move the block over the desired distance.1.1.2 Determine the time it would take to move the block over the desired distance.1.2 Determine the force applied to rotate an object around an axis with a torque of 100Nm. The anglebetween the moment arm and the applied force is 56.44° and the moment arm has a length of 0.8 m.1.3 Aluminium with an unknown mass and an initial temperature of 18 °C is to be melted in an arc furnacein 1 hour and 30 minutes. The aluminium has a melting point of 938 K, a specific latent heat of fusionof 458 kJ/kg and specific heat capacity of 1016.22 J/kg. C. The energy required for the melting processis 156 MJ, the efficiency of the furnace is 81% and the cost of electrical energy is 92c/kWh.1.3.1 Calculate the mass of the aluminium.

1.1 A 50 kg cement block needs to be moved, over a distance of 10m, the power available is 200 W, while the block accelerates at 5 m/s? when this power is applied. 1.1.1 Determine the work it would take to move the block over the desired distance. 1.1.2 Determine the time it would take to move the block over the desired distance.

1.1 A 50 kg cement block needs to be moved, over a distance of 10m, the power available is 200 W, while the block accelerates at 5 m/s? when this power is applied. 1.1.1 Determine the work it would take to move the block over the desired distance. 1.1.2 Determine the time it would take to move the block over the desired distance.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Choose 1.Moving equipment or parts is the hazard associated with what energy source? Electrical .Thermal .Mechanical .Body mechanics .Pressure
For an electrical component, the formulas for charge and voltage are given below. A is 9 coulombs, B is 12 seconds, C is 3 volts, and D is 24 seconds. Give the power of this component at t = 7 sec. You must round your answer to the nearest thousandth and give your answer as an integer followed by the appropriate metric prefix and the letter that represents the units of power.
2)(a) Determine the SI base units of resistivity (b) A car headlight filament is made of tungsten and has a cold resistance of 0.350 Ω. If the filament is a cylinder 4.00 cm long, what is its diameter?(c) Two charges Q1 & Q2 are separated by a distance D. If both charges are doubled, what happens to the force between the charges? Show your work.
14/ Energy is the ability to do Work or apply Force to move an object. Select one: True False
At 0 ⁰C and under 1 atm pressure, at 12 m / s wind speed 1 ?2 during a 100 hour run Calculate the amount of energy that can be produced in the area. (ρ = 1,293 kg / ?3)
For an electrical component, the formulas for charge and voltage are given below. A is 9 coulombs, B is 12 seconds, C is 3 volts, and D is 24 seconds. Give the current of this component at t1 = 8 sec. You must round your answer to the nearest thousandth and give your answer as an integer followed by the appropriate metric prefix and the letter that represents the units of current.
A small glass bead has been charged to + 60.0 nC . A small metal ball bearing 1.40 cmcm above the bead feels a 1.90×10−2 N downward electric force. What is the charge on the ball bearing? Express your answer with the appropriate units.
1. With the use if canva.com provide an infographic material in answering the following questions. Upload your answer in JPEG format or PNG format. One infographic per question. How is electricity generated? Use the following flow chart as your guide in creating your own infographic using canva.com. What problems arise from electricity generation? How can you prevent it? What are the difference between an indoor and an outdoor substation. Compare each substation in terms of operation, specifications, and setup. Provide actual examples to each substations.
complete solution. Fix yourcalculator in four decimal places and show your final answers in FOUR DECIMAL places. 1. The resistance of the wire used for telephone is 35 Ω per kilometre when the weight of the wire is 5 kg per kilometre. If the specific resistance of the material is 1.95 x 10^-8 Ω-m, what is the cross sectional area of the wire? What will be the resistance of a loop to a subscriber 8 km from the exchange if wire of the same material but weighing 20 kg per kilometre is used?
Solve the following problems with complete solutions and units using 2 decimal digits: The resistance of a given e electric device is 46 Ω at 25°C. If the temperature coefficient of resistance of the material is 0.00454 at 20°C, determine the temperature of the device when its resistance is 92 Ω
SHOW COMPLETE SOLUTION. 2 DECIMAL PLACES X=1, Y=2,Z=3
Based on the given picture below, answer the following questions. a. What is the maximum voltage where you should connect its socket? b. How much voltage is produced by this charger in a laptop battery? c. How much resistance is offered by the charger itself? d. What is the power of the charger in kW? e. If you will use the charger for 3 hours, how much energy is consumed in Joules?