2. Two balanced three-phase loads are connected in parallel. Load 1 draws 20 kW at a lagging power factor of 0.85; Load 2 draws 25 KW at a lagging power factor of 0.5. The line voltage at the terminals at the load is 440 V. The load terminals are connected to the source terminals by means of cables which have an impedance of 1 + j3 ohms each. Calculate the 1ine voltage at the terminals of the source. a. 795 V

2. Two balanced three-phase loads are connected in parallel. Load 1 draws 20 kW at a lagging power factor of 0.85; Load 2 draws 25 KW at a lagging power factor of 0.5. The line voltage at the terminals at the load is 440 V. The load terminals are connected to the source terminals by means of cables which have an impedance of 1 + j3 ohms each. Calculate the 1ine voltage at the terminals of the source. a. 795 V

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.44P: Two balanced three-phase loads that are connected in parallel are fed by a three-phase line having a...

See similar textbooks

Similar questions

Consider a three-phase Y-connected source feeding a balanced- load. The phasor sum of the line currents as well as the neutral current are always zero. (a) True (b) False
A balanced three-phase 240-V source supplies a balanced three-phase Load. If the line current IA is measured to be 15 A and is in phase with the line-to-line voltage, VBC, find the per-phase load impedance if the load is (a) Y-connected, (b) -conneeted.
A three-phase line with an impedance of (0.2+j1.0)/ phase feeds three balanced three-phase loads connected in parallel. Load 1: Absorbs a total of 150 kW and 120 kvar. Load 2: Delta connected with an impedance of (150j48)/phase. Load 3: 120 kVA at 0.6 PF leading. If the line-to-neutral voltage at the load end of the line is 2000 v (rms), determine the magnitude of the line-to-line voltage at the source end of the line.
A single-phase source is applied to a two-terminal, passive circuit with equivalent impedance Z=3.045, measured from the terminals. The source current is i(t)=22cos(t)kA. Determine the (a) instantaneous power, (b) real power, (c) reactive power delivered by the source, and (d) source power factor.
Two balanced Y-connected loads, one drawing 10 kW at 0.8 power factor lagging and the other IS kW at 0.9 power factor leading, are connected in parallel and supplied by a balanced three-phase Y-connected, 480-V source. (a) Determine the source current. (b) If the load neutrals are connected to the source neutral by a zero-ohm neutral wire through an ammeter, what will the ammeter read?
It is stated that (i) balanced three-phase circuits can be solved in per unit on a per-phase basis after converting - load impedances to equivalent Y impedances. (ii) Base values can be selected either on a per-phase basis or on a three-phase basis. (a) Both statements are true. (b) Neither is true. (c) Only one of the above is true.
A balanced three-phase source is supplying 60 kVA at 0.6 lagging to two balanced Y-connected parallel loads. The distribution line connecting the source to the load has negligible impedance. Load 1 is purely resistive and absorbs 30 kW. Find the per-phase impedance of Load 2 if the line voltage is 1203 V and the impedance components are in series.
A balanced three-phase distribution line has an impedance of (1 +j8)ohm/phase .This line is used to supply three balanced three-phase loads that are connected in parallel. The three loads are:Load I: S1/phase = 40kVA at a power factor of 0.96 leading.Load 2: S2/phase = 60 kVA at a power factor of 0.8 lagging.Load 3: P3/phase= 33.6 kW and Q3/phase = 5.2 kVAR.The magnitude of the phase-to-neutral voltage at the terminals of the loads is2400 V (rms)and is considered as phase reference. A)find the complex apparent power per phase at the source end of the line
A balanced three-phase distribution line has an impedance of (1 +j8)ohm/phase .This line is used to supply three balanced three-phase loads that are connected in parallel. The three loads are:Load I: S1/phase = 40kVA at a power factor of 0.96 leading.Load 2: S2/phase = 60 kVA at a power factor of 0.8 lagging.Load 3: P3/phase= 33.6 kW and Q3/phase = 5.2 kVAR.The magnitude of the phase-to-neutral voltage at the terminals of the loads is2400 V (rms)and is considered as phase reference.a) Find the total complex apparent power per phase STotal/phaseb)Draw the single phase equivalent circuit.c)What is the magnitude of the phase-to-neutral voltage at the sending end of the line?d)Find the complex apparent power per phase at the source end ofthe line.
Two three-phase generating power stations, A and B, work at 97 kV and deliver power to their respective consumers as follows: Power station A delivers 900 MVA to its consumers at a power factor of 0.766 lagging. Power station B delivers 600 MVA to its consumers at a power factor of 0.819 lagging. An interconnector with an impedance of (1.5 + j5.6) Ω per line is connected between A and B. The voltage at power station A is advanced with an angle of 9° with respect to the voltage at power station B. Use the complex power method and do the following calculations. Determine the total active power delivered or received by Power station A (Pi) in MW Determine the total reactive power delivered or received by Power station A (Qi) in MVAr Determine the total active power delivered or received by Power station B (Pj) in MW. Determine the total reactive power delivered or received by Power station B (Qj) in MVAr Use complex power method to determine the final reactive power loadings (Qa) on…
Two balanced three-phase loads that are connected in parallel are fed by a three-phase line having a series impedance of ZL = (0:4 + j2:7) Ω per phase. One of the loads absorbs 560 kVA at 0.707 power factor lagging, and the other 132 kW at unity power factor. The line-to-line voltage atthe load end of the line is 2; 200p3 V. Compute: a) The line-to-line voltage at the source end of the line.b) The total real and reactive power losses in the three-phase line.c) The total three-phase real and reactive power supplied at the sending end of the line. Check that the total three-phase complex power delivered by the source equals the total three-phasecomplex power absorbed by the line and loads.
In a balanced abc sequential, three-phase star-star connected system, the total power on the line is 650W. If VAN117/15 degrees Vrms, the load's power factor is 0.88(forward) and the line impedance is 1+j2ohm, what is the load impedance value? a)5+j1.78ohm b) 5-j1.78ohm c) 7-j3.08ohm d) 7+j3.78ohm