2.25 m The frame shown supports part of the roof of a small В building. Knowing that the tension in the cable is 150 kN, determine that reaction at the fixed end E. (hint: don't consider the force on cable section BD) 3.75 m 20 kN 20 kN 20 kN 20 kN F 1.8 m'1.8 m'1.8 m'1.8 mE 4.5 m
Q: Two cables are tied together at C and are loaded as shown. Determine the tension (a) in cable AC,…
A: The free body diagram of the system is shown below: The angle between the cable AC and BC is 120…
Q: Three wires are connected at point D, which is located 18 in. below the T-shaped pipe support ABC.…
A:
Q: Two metal pipes AB and BC, each having a mass per unit length of 10 kg/m, are welded together at B…
A:
Q: Structural members A and B are riveted to the support that shown in the figure. If both elements are…
A: Given Data: The force exerted on the member A FA=10 kN The force exerted on the member B FB=15 kN
Q: 1. The weight of a car is distributed on its wheels as shown below. If the weight of the truck is 27…
A: Find the distance (d) from B Weight= 27 kN
Q: A bent pipe is connected by a thrust bearing and a cable as shown. If a Force, F = 184 lb, is…
A: There will be two reactions at thrust bearing and tension in the cable. Since Force F acts in single…
Q: Two cables are tied together at c and are loaded as shown. Oetermine the tension in cable AC and in…
A: Given: Mass of the stone, m=200 lb or 90.72 kg
Q: A frame consists of members AD, DE, EH, and BG. They are connected by pins at B, D, E, and G. The…
A:
Q: Q2) The man exerts a force P of magnitude 250N on the handles of the wheel barrow. Knowing that the…
A:
Q: 3. A 1600-lb crate is supported by three cables as shown. Determine the tension in each cal B 36 in.…
A: Hello dear, According to our guidelines I can solve only first question, kindly repost your second…
Q: A 36-lb triangular plate is supported by three wires as shown. Determine the tension in each wire,…
A: Understand that the weight of the plate lies in the negative the y-direction. Write the expression…
Q: Determine the reaction at C, if a horizontal circular platform of radius "R" is supported at three…
A: Given dataAngle between A and B = 900Angle between A and C = 1200Radius of the circular platform =…
Q: Three wires are connected at point D, which is located 18 in. below the T-shaped pipe support ABC.…
A:
Q: For the rectangular plate of Probs. 2.109 and 2.110, determine the tension in each of the three…
A: The FBD of the problem is as follows,
Q: Two cables are tied together at C and are loaded as shown. Determine the tension (a) in cable AC,…
A: GIVEN MASS , M=200KGLET TAC & TBC BE TENSIONS IN THE CABLEAC & BC RESPECTIVELY
Q: A crate is supported by three cables as shown. Determine the weight of the crate knowing that the…
A: Let TAB TAC and TAD be the tensions acting along the cables. The position vector of point A, B, C…
Q: Three cables are used to tether a balloon as shown. Knowing that the balloon exerts an 800-N…
A: Given Applied force on point A = 800 N To find Tension in each cable
Q: A rectangular plate is supported by three cables as shown. Determine the tension in each of the…
A: Given data: Weight of the plate, W = 792 N Writing the projections along AD, BD and CD.
Q: The crane BC shown below lifts a load of W. Neglecting the weight of the crane. Determine the…
A:
Q: B. Six steel cables are supporting a circular heavy molding of diameter 2.5 m from overhead point.…
A: Given data: d = 2.5 m W=3 kN/m Need to determine the tension in the steel cable.
Q: y Unit: m 4.8 3.0 D 5.0 1.3 3.2 3.6 X 4.5
A:
Q: The truss shown its subjected to the forces P = 64 kN, lenght L = 12 m divided in equal separations…
A: The free body diagram of the given truss is shown below.
Q: In the frame shown, member ACE and BCD are connected by a pin at C and by the link DE. Determine all…
A:
Q: A machine component is subjected to the forces and couples shown.The component is to be held in…
A: Given Applied loading in the structure To find Rivet hole (a) On line FG (b) On line GH
Q: A transmission tower is held by three guy wires attached to a pin at A and anchored by bolts at B, C…
A: Given data To determine the vertical force P exerted by the tower on the pin at A if the tension…
Q: The jib crane AB shown is supported by a link member BC and a hinge at A. Neglecting the weight of…
A: The hinge at A gives the horizontal and vertical reactions. The free-body diagram of AB is The…
Q: For the cables of Prob. 2.46, it is known that the maximum allowable tension is 600 N in cable AC…
A: (1) Given data The tension in the member AC is FAC=600 N The tension in the member BC is FBC=750 N…
Q: A rectangular plate is supported by three cables as shown. Knowing that the tension in cable AD is…
A: From the geometry define the vector DA. Now determine the unit vector and length of vector DA.
Q: Three wires are connected at point D, which is located 18 in. below the T-shaped pipe support ABC.…
A: Write the vector form of the coordinates of point B. Write the vector form of the coordinates of…
Q: 4.45 The uniform, 40-lb ladder is raised slowly by pulling on the rope attached at A. Determine the…
A: mass of ladder = 40 lb=18.1437 kg ; weight of ladder =18.1437 kg×9.81 m-s-2=177.9897 N ; maximum…
Q: 1. A uniform circular rod of weight 8 lb, and radius 10 in. is attached to a pin at C and to cable…
A:
Q: Two forces P and Q are applied as shown to an aircraft connection. Knowing that the connection is in…
A: Resolving the forces in x and y direction, For equilibrium, the total horizontal and vertical…
Q: Two cables tied together at C are loaded as shown. Knowing that W = 190 lb, determine the tension…
A:
Q: Two cables are tied together at C and loaded as shown. Determine the tension (a) in cable AC, (b) in…
A: The free diagram of the cables are shown below, Here, TAC and TBC are the tension in cable AC and…
Q: PROBLEM 2.89 A rectangular plate is supported by three cables as shown. Knowing that the tension in…
A:
Q: Two hydraulic cylinders control the position of the robotic arm ABC. In the position shown, the…
A: Let us consider arm ABC sinθ=45 AE=4002+3002=500 mm cosθ=35 Take moment about B…
Q: Two cables are tied together at C and are loaded as shown. Determine the tension (a) in cable AC,…
A:
Q: 1. Three uniform 1-meter bars weighing "W" each are welded together as shown. The bars are suspended…
A: When a push or pull applied on the body, then it has the tendency to change the state of the object…
Q: 1. Two tape spools are attached to an axle supported by bearings at A and D. Assume that the bearing…
A:
Q: The crate shown is supported by ropes AB and AC. Determine the tension in the ropes. B 5 40° 3 A W =…
A:
Q: A crate is supported by three cables as shown. Determine the weight of the crate knowing that the…
A: Given Data: The coordinate of point A is (0,-60,0). The coordinate of point D is (40,0,-27) The…
Q: Two metal pipes AB and BC, each having a mass per unit length of 10 kg/m, are welded together at B…
A:
Q: The bent rod ABEF is supported by bearings at C and D and by wire AH . Knowing that portion AB of…
A: Different Point C=50,0,0D=350,0,0
Q: The rectangular plate shown weighs 80 lb and is supported by three vertical wires. Determine the…
A: Free Body Diagram
Q: Two links AB and DE are connected by a bell crank as shown. Knowing that the tension in link AB is…
A: (a) Moment acting about point C FAB602+802=FDE120FDE=56FAB=56720 N=600 N Tension in DE is 600 N (b)…
Q: B A Two cables are tied together at C and loaded as shown. Determine the tension (a) in cable AC,…
A: Find the tension force in AC and AB.
Q: A crate is supported by three cables as shown. Determine the weight of the crate knowing that the…
A: Given data: Tension in the cable AC, TAC = 544 lb. Let TAC, TAB, and TAD are the tension in the…
Q: 1. The cable supports a girder which weighs 750 lb/ft. Determine the tension in the cable at points…
A:
Trending now
This is a popular solution!
Step by step
Solved in 3 steps with 3 images
- An 1800-N load Q is applied to pulley C, which can roll on cable ACB. The pulley is held in the position shown by a second cable CAD, which passes over pulley A and supports a load P. Determine (a) the tension in cable ACB, (b) the magnitude of load P.A transmission tower is held by three guy wires attached to a pin at A and anchored by bolts at B, C, and D . If the tension in wire AC is 590 lb, determine the vertical force P exerted by the tower on the pin at A.Three cables are used to support a plate of weight W lb. Determine the tension that is needed in each cable to achieve the equilibrium position. Givens-> W: 13 LbΘ°: 13X: 713 mm Please only in Lb
- A 6-m telephone pole weighing 1600 N is used to support the ends of two wires. The wires form the angles shown with the horizontal,and the tensions in the wires are, respectively, T1 = 600 N and T2 =375 N. Determine the reaction at the fixed end A.Two steel pipes AB and BC , each having a mass per unit length of 8 kg/m, are welded together at B and supported by three vertical wires. Knowing that a= 0.4 m, determine the tension in each wire.For the rectangular plate of Probs. 2.109 and 2.110, determine the tension in each of the three cables knowing that the weight of the plate is 792 N.(Reference to Problem 2.109):A rectangular plate is supported by three cables as shown. Knowing that the tension in cable AC is 60 N, determine the weight of the plate.(Reference to Problem 2.110):A rectangular plate is supported by three cables as shown. Knowing that the tension in cable AD is 520 N, determine the weight of the plate.
- The structure shown consists of a single member ABCDE with a pin support at A and a roller support at E. Points B and D are at the midpoints of their respective segments. Determine the internal normal force acting on H which are located immediately to the right of B. Take N = 2 kN, O = 5 kN, and P = 5 kN.4.108 - A 2250 N marquee, 2,4 x 3 m, is held in a horizontal position bytwo horizontal hinges at A and B and by a cable CD attached to a point D located 1,5m directly above B. Determine the tension in the cable and the components of the reactions at the hinges.Three wires are connected at point D, which is located 18 in. below the T-shaped pipe support ABC. Determine the tension in wire AD when a 150 lb cylinder is suspended from point D as shown.
- A bent pipe is connected by a thrust bearing and a cable asshown. If a Force, F = 195 lb, is applied, what are the reactions at the thrust bearing and in the cable. The dimensions shown are a = 7.2 ft, b = 6.2 ft, and c = 4.6 ft.The structure shown is composed of an AGJ truss and a KLMO truss connected by the AL link. If it is known that P = 2 kN; R = 5kN; a = 1.5 m and b = 2m, determine:to. The value of the force Q, necessary to keep the system in equilibrium.b. The axial loads of the reinforcement elements. (need free body diagrams)A 36-lb triangular plate is supported by three wires as shown. Determine the tension in each wire, knowing that a=6 in.