225P,- 8P,- 109- 182 (m)| 1 (m)4.50 (m)1.50 (m) Situation 1| An overhang beam is loaded as shown below. The beam cross-sectionwas butlt by attaching two (2) channels to a 9mm thick plate using 16mm rivets.The property of the channel is given below:Depth, D = 225 mmFlange Thickness, t= 9mmFlange Width, B, -112.5 mmWeb Thickness, t. -9 mmThe allowable flexural stress on the beam is 180 MPa. Rivets has a capacity of t=100 MPa on shear, for bearing, o,-200 MPa on single shear, a, =260MPa on doubleshear.

Answered: Image /qna-images/answer/40178d2f-e39c-4288-a459-8e8a259c1d68.jpg

Answered: 225 P,- 8 P,- 10 9- 18 2 (m) 1 (m) 4.50…

Engineering

Civil Engineering

225 P,- 8 P,- 10 9- 18 2 (m) 1 (m) 4.50 (m) 1.50 (m)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Situation 11 An overhang beam is loaded as shown below. The beam cross-section was built by attaching two (2) channels to a 9mm thick plate using 16mm rivets The property of the channel is given below: Depth, D=225 mm Flange Width, B=112.5 mm. Flange Thickness, tf=9mm Web Thickness, tw9 mm The allowable flexural stress on the beam is 180 MPa. Rivets has a capacity of t 100 MPa on shear, for bearing, o.-200 MPa on single sheer, a-260MPa on double shear. 2. Determine the moment of inertia, I, of the section in mm^4.
Situation 11 An overhang beam is loaded as shown below. The beam cross-section was built by attaching two (2) channels to a 9mm thick plate using 16mm rivets The property of the channel is given below: Depth, D=225 mm Flange Width, B=112.5 mm. Flange Thickness, tf=9mm Web Thickness, tw9 mm The allowable flexural stress on the beam is 180 MPa. Rivets has a capacity of t 100 MPa on shear, for bearing, o.-200 MPa on single sheer, a-260MPa on double shear. Determine the maximum flexural stress on the beam in MPa. Determine the maximum shearing stress on the beam in MPa.
Situation 11 An overhang beam is loaded as shown below. The beam cross-section was built by attaching two (2) channels to a 9mm thick plate using 16mm rivets The property of the channel is given: Depth, D=225 mm Flange Width, B=112.5 mm. Flange Thickness, tf=9mm Web Thickness, tw9 mm The allowable flexural stress on the beam is 180 MPa. Rivets has a capacity of t 100 MPa on shear, for bearing, o.-200 MPa on single sheer, a-260MPa on double shear Determine the location of centroid, y, from top of the beam in mm Determine the moment of inertia, I, of the section in mm^4. Determine the maximum allowable moment, M(all) in kn-m, base on the beam's cross-section. Determine the location of the maximum moment on the beam in meters. Determine the maximum moment, in kN-m, on the beam Determine the maximum flexural stress on the beam in MPa.
Situation 1| An overhang beam is loaded as shown below. The beam cross-section was built by attaching two (2) channels to a 9mm thick plate using 16mm rivets The property of the channel is given below: Depth, D=225 mm Flange Thickness, tf=9mm Flange Width, B=112.5 mm Web Thickness, tw9 mm The allowable flexural stress on the beam is 180 MPa. Rivets has a capacity of t 100 MPa on shear, for bearing, o.-200 MPa on single sheer, a-260MPa on double shear 1. Determine the location of centroid, ȳ, from top of the beam in mm
Consider the reinforced beam section below with E = 200 GPa, Ec = 22.05 GPa, fsa = 138 MPa and fca = 9.30 MPa. Using internal couple method with M=62.265 KN-m, determine the effective depth d of the section in mm. Express your answer in whole number.
A beam has a uniform dead load and live load has a fixed support at both ends. If the beam properties are given below, what is the stress at bottom of the beam section at the midspan. (MPa) Properties: Beam width = 263 mmBeam height = 466 mmWLL = 12.52 kN/mWDL = 18.03 kN/mSpan of the beam = 11 mPrestressing force = 323 kNeccentricity = 105 mm
Situation 11. An overhang beam is loaded as shown below. The beam cross-section was built by attaching two (2) channels to a 9mm thick plate using 16mm rivets The property of the channel is given below: Depth, D=225 mm Flange Width, Bf=112.5 mm. Flange Thickness, tf=9mm Web Thickness, tw=9 mm The allowable flexural stress on the beam is 180 MPa. Rivets has a capacity of τ= 100 MPa on shear, for bearing, σb=200 MPa on single sheer, σb= 260MPa on double shear. 3. Determine the maximum allowable moment, M(all) in kn-m, base on the beam's cross-section. 4. Determine the location of the maximum moment on the beam in meters.
Situation 11. An overhang beam is loaded as shown below. The beam cross-section was built by attaching two (2) channels to a 9mm thick plate using 16mm rivets The property of the channel is given below: Depth, D=225 mm Flange Width, Bf=112.5 mm. Flange Thickness, tf=9mm Web Thickness, tw=9 mm The allowable flexural stress on the beam is 180 MPa. Rivets has a capacity of τ= 100 MPa on shear, for bearing, σb=200 MPa on single sheer, σb= 260MPa on double shear. 7. Determine the maximum shearing stress on the beam in MPa. 8. Determine the flexural stress, In MPa, on the fiber 30mm above NA at distance 1m from A
Situation 11. An overhang beam is loaded as shown below. The beam cross-section was built by attaching two (2) channels to a 9mm thick plate using 16mm rivets The property of the channel is given below: Depth, D=225 mm Flange Width, Bf=112.5 mm. Flange Thickness, tf=9mm Web Thickness, tw=9 mm The allowable flexural stress on the beam is 180 MPa. Rivets has a capacity of τ= 100 MPa on shear, for bearing, σb=200 MPa on single sheer, σb=260MPa on double shear. 1. Determine the location of centroid, y, from top of the beam in mm .
A beam cast monolithically with the slab thickness of 110 has a span of 4 m spaced at 6 m center to center. The width of the web is 300 mm and effective depth of 500 mm. It is reinforced on the tension side with 8-20 mm Φ rebars. Fc’ = 30 MPa fy = 310 MPa 1. Which gives the effective width of flange? a. 2000 mm b. 1500 mm c. 2500 mm d. 1000 mm 2. Which gives the depth of the compression stress block? a. 30.55 mm b. 32.56 mm c. 12.45 mm d. 42.14 mm
Compute the ultimate strength capacity of the positive moment beam design below. f'c= 24.7 MPa, fy= 505.6 MPa, bf= 760 mm, t= 90 mm, hw= 420 mm, bw = 370 mm ds= 12 mm, ct= 30 mm, cb = 35 mm. Steel bar details: compression side at top (single layer): 4 - 20 mm dia. , tension side (double- layered): upper layer is 4 - 25 mm dia. and lower layer is 5 - 25 mm dia.
The following T-Beam has given properties: Effective Depth (d) = 485 mm, thickness of the slab = 100 mm. Web thickness of 300 mm, and the span of the beam is 5.0 m having a spacing of 2.4 m, center to center. The live load moment of 163 kN-m, and a dead load moment of 84 kN-m, these moments are unfactored. fc' =20.7 MPa, fy = 413.7 MPa, d' = 65 mm. b) Determine the value of "a" (Take the beam as Tension-Controlled)