3-6 A section beam is with b=400mm, b=200mm, h=500mm and h'=80mm. The concrete is of grade C30, the de-sign moment is M=270KN • m and the steel is HRB400. Thetension reinforcement A, is required.

Given Grade of concrete is C30 Grade of steel is HRB400 Effective depth 450 mm Effective cover 50mm…

3-6 A section beam is with b=400mm, b=200mm, h= 500mm and h=80mm. The concrete is of grade C30, the de- %3D sign moment is M=270kN •m and the steel is HRB400. The tension reinforcement A, is required.

3-6 A section beam is with b=400mm, b=200mm, h= 500mm and h=80mm. The concrete is of grade C30, the de- %3D sign moment is M=270kN •m and the steel is HRB400. The tension reinforcement A, is required.

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter9: Composite Construction

Section: Chapter Questions

Problem 9.1.1P

See similar textbooks

Related questions

Q: 3-1 A rectangular section with width b-250mm and depth h-500mm is to carry a design bending moment…

Q: A 300 mm wide reinforced concrete beam has an effective depth of 450 mm. It is reinforced in the…

Q: The column is reinforced with 10 32-mm bars distributed around the perimeter. Load Pn will be…

Q: A 300 mm wide reinforced concrete beam has an effective depth of 450 mm. It is reinforced in the…

Q: A rectangular beam has a width of 267mm and an effective depth of 495mm. It is reinforced with…

Q: The width and effective depth of a reinforced concrete beam is 250 mm and 440 mm respectively. The…

A: Given data Width of beam (B) = 250mm Effective depth of beam (d) = 440mm Area of steel Ast = 4 ×…

Q: Situation: A beam has a width of 300 mm and an effective depth of 480 mm strength f'c-34 MPa. Steel…

Q: A simply supported beam 300 mm wide, 500 mm deep and spans 5.2 m supports a service super imposed…

Q: A spiral column with the diameter of 500 mm has the effective height of lo-4.0 m. The axial…

A: Given information is Diameter is d=500 mm effective height l0=4.0m From the above information we…

Q: A 400mm x 550mm concrete beam is reinforced with 5 -16 mm diameter MRSB on the tension side only.…

A: For calculating the capacity of the beam, use the following steps Calculate neutral axis Calculate…

Q: n exterior beam has 300 mm and a height of 600 mm, it is reinforced with 5-p25 mm bars for tension…

A: Given : an exterior beam has 300 mm and a height of 600 mm, it is reinforced with 5-p25 mm bars for…

Q: Calculate yield moment for the beam. Assume concrete accepts no tension. Use fc' = 4000 psi and =…

Q: Determine the required tension steel area of the T beam with given properties below. Width of flange…

A: Given Bf= 410 mm Bw= 250 mm Tf = 130 mm

Q: Determine the shear strength of a 1⁄2-in. 3 2 1⁄2-in. stud, where there are two studs per rib. The…

A: Lower Limit Asα = π0.54 = 0.1963 in2 Qn=0.5Asafc'Ec ≤ RgRpAsaFu =0.50.196343492 = 11.60 kips

Q: A rectangular beam has a width of 283mm and an effective depth of 461mm. It is reinforced with…

Q: A rectangular beam has a width of 254mm and an effective depth of 600mm. It is reinforced with…

Q: Q1/The area of the reinforcement for a rectangular reinforced beam is 1991mm². The width of the…

Q: Determine the required tension steel area of the T beam with given properties below. Width of flange…

Q: A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars…

A: Solution-The given values are as follows,b=250mh=500mThe bottom with 4-20-mm-diameter bars The top…

Q: A rectangular beam 350 mm wide and effective depth of 500 mm is to be designed as subjected to an…

A: GIVEN : A rectangular beam 350 mm wide and effective depth of 500 mm is to be designed as subjected…

Q: 2. An isolated T-beam is composed of a flange 700 mm wide and 175 mm deep cast monolithically with a…

Q: A rectangular beam has a width of 258mm and an effective depth of 600mm. It is reinforced with…

A: To find : depth of concrete stress block

Q: The column is reinforced with 10 32-mm bars distributed around the perimeter. Load Pn will be…

A: When the load acting on the column is offset from the centroid of the column, it causes bending of…

Q: The reinforced concrete beam is made using two steel reinforcing rods. Figure 1 of 1 Part A If the…

A: Given that :

Q: A rectangular beam has a width of 298mm and an effective depth of 465mm. It is reinforced with…

Q: A rectangular beam has dimensions of 300 mm by 650 mm with an effective depth of 590 mm and is…

Q: 1042. A reinforced concrete beam 6 m long and perfectly re- strained at the ends is to carry a live…

Q: The T-beam shown in figure resulted from monolithic construction of the beam and slab. The effective…

A: We have to determine nominal strength of the beam for positive moment neglecting the contribution of…

Q: A rectangular beam has dimensions of 290 mm by 710 mm with an effective depth of 652 mm and is…

Q: For the inverted precast concrete T- beam Steel reinforcement consists of four bars each with a…

Q: A rectangular reinforced concrete beam has a length of 7.5 – 10.5 m. It is supported with a hinged…

Q: Steel: A- 500 mm? - 120 MPa Timber: 1.8 Find the maximum allowable value of P for the column. The…

Q: A prestressed beam has a cross section of 250 mm x 500 mm and has a simple span of 6 m. The tendons…

Q: the T-beam is reinforced with an unbonded tendon having an area Aps=1000 sq. mm., fc'=35 MPa, Fpu=…

Q: Practice Problem 4.5 A rectangular beam has a width of 320 mm and an effective depth of 570 mm.…

Q: A beam having a width of 500 mm and a total depth of 800mm is reinforced with 6-32mm dia bars,…

A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…

Q: The concrete post is reinforced axially with four symmetrically placed steel bars, each of…

Q: A rectangular reinforced concrete beam with a width of 260 mm and a total depth of 650 mm with…

Q: c) Find the stresses in the concrete and the reinforcement for the following applied moments: (i) -…

A: Given:b=300 mmh=520 mmEc=30 GPaEs=200 GPad=460 mmAs=1470 mm2 Modular ratio has to be determined.…

Q: 3. A reinforced rectangular concrete beam having a width of 300 mm, effective depth of 500 mm, fc' =…

Q: A prestressed concrete beam 410mm x 572mm has the following service loadings PDL-55 KN PLL-84 KN…

A: Answer We are given width b = 410 mm Height h = 572 mm Concentrated Live load PDL = 55 KN…

Q: Assume straight line instead of parabola for stress-strain curve of concrete as follows and partial…

A: Given- RCC sectionwidth b=300 mmeffective depth d=500 mm3 bars of grade Fe415dia=16 mM20 concrete…

Q: The column is reinforced with 10 32-mm bars distributed around the perimeter. Load Pn will be…

A: All columns must be designed to have a minimum eccentricity equal to the unsupported length of the…

Q: What is the maximum area of reinforcements (mm2) of the concrete beam if the specified compressive…

A: Given data - Compressive strength of concrete = 23 MPa Steel yield strength = 410 MPa Beam width b…

Q: A rectangular cantilever beam has a width of 250mm and an effective depth of 480mm. It is reinforced…

A: Given : Width of cross-section of cantilever beam, B = 250 mmEffective depth of cross-section of…

Q: A beam having a width of 300 mm and a depth of 600 mm carries a dead load of 24 kn/m (including its…

Q: The web has a width of 350 mm and the slab thickness is 100 mm. The beam has a span of 16.5 feet and…

Q: addition to its weight. Assuming d=600 design a beam with balanced Stress → reinforcement, using…

A: Given data: span = 6m LL = 20kn/m d= 600mm n= 10

Q: The middle of the 5.6 m simple beam has a dimension of 350 mm by 600 mm. On that location, the beam…

A: d' (Effective cover) = 40 + 12 + 20/2 = 60mm d (effective depth) = 600 - 60 = 540mm wu = 1.2wD =…

Q: Q5: Calculate the following parameters for the section shown in figure(3) to resist moment 45 kN.m,…

Concept explainers

Design criteria for structural loading

The different loads such as loads due to self-weight (dead load) and external loads such as live load, wind loads, seismic load, snow load, and other loads and load combinations that influence the design of a building are called structural loading. The nature of the applied load differs from changes in the location, design, and type of materials used. The design criteria require that structures must be designed and constructed to be able to withstand all load types that are expected to act upon the structure and render its usage for the designated purpose. The structural members such as beams, slabs, columns, and foundations help the structure to withstand the applied load. There are different institutes such as ASCE and ACI that provide building design codes to assure minimum safety requirements and quality of the structures.

Question

3-6 A section beam is with b=400mm, b=200mm, h=
500mm and h'=80mm. The concrete is of grade C30, the de-
sign moment is M=270KN • m and the steel is HRB400. The
tension reinforcement A, is required.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A rectangular beam has a width of 254mm and an effective depth of 600mm. It is reinforced with 4-36mm bars. The compressive strength of the concrete is 28MPa and the yield strength of the steel is 308MPa. The depth of the concrete stress block is ___ mm.
an exterior beam has 300 mm and a height of 600 mm, it is reinforced with 5-p25 mm bars for tension which is laid out according to the code requirements. the depth of the tension strain of the beam is 353 mm. of the steel has a yield strength of 414 mpa. determine the following: Compressive strength of the concrete Maximum steel ratio Ultimate moment capacity of the beam
A rectangular beam has a width of 269mm and an effective depth of 600mm. It is reinforced with 4-36mm bars. The compressive strength of the concrete is 28MPa and the yield strength of the steel is 285MPa. The depth of the concrete stress block is ___.
A beam cast monolithically has the following properties: bf=1200mm, t or hf = 110mm, bw=380mm and h=800mm. It is reinforced with 10D32mm grade 420MPa bars. Concrete strength is assumed to be 27.5MPa and the centroid of tension reinforcement is located 665mm from the outermost compression fiber. i.Determine the design strength in kN-m.
Q-A pre-tensioned concrete member of section 200 mm x 250 mm contains tendons of area 500 mm² at centre of gravity of the section. The prestress in the tendons is 1000 N/mm². Assuming modular ratio as 10, find the stress (N/mm2) in concrete.
A concrete floor slab 100 mm thick is cast monolithic with concrete beams 2.0 m on centers. The beams have a span of 4.2 m, web width of 250 mm and overall depth of 450 mm. The tensile reinforcement consists of 4-∅25 mm bars in two rows with 25 mm vertical clear spacing. Use material strengths f’c = 21 MPa and fy = 415 MPa. Tensile steel strain compatible with concrete strain of 0.003 in 3 decimal places.
3. A reinforced rectangular concrete beam having a width of 300 mm, effective depth of500 mm, fc’ = 24 MPa, fy = 415 MPa, 4 - 28 mmɸ, d’ = 65 mm. Present the following (a) actual steel ratio (b) maximum steel ratio (c) a(d) c (e) check if steel yields (f) ?steel(g) type of failure (h) reduction factor (i) moment capacity
The material of the bcam given below is C35-45- B50OC and it is good quality concrete. The cobcreie cover is gIYCD as 50 mm. Thc dimensions of the bcam are gven as be820 mm. bw:350mm.t130 m, b 700 mm. Tbe sbear force (Vd)is S50 EN and stirrup calcelations will be done in the span region othe beam. Ir 338 stirupis used to mcet the shear force, what is the maximum stimup spacing (cm) in span region? (s=2) 11 15 D13 017 Boş bırak Sonraki> Kapat
O Find the ultimate moment of resistance for the rectangular section reinforced as shown below. material strengths: Concrete Reinforcement Width of section Reinforcement fcu:= 30-MPa fy:= 450-MPa b:= 280-mm d:= 510-mm A, 2410-mm d':= 50-mm A's:= 628-mm² b A', d'
A rectangular cantilever beam has a width of 250mm and an effective depth of 480mm. It is reinforced with 7-25mm bars. The beam is carrying a uniformly distributed dead load of 15kN/m. The compressive strength of the concrete is 21MPa and the yield strength of the steel is 415MPa. The depth of the concrete stress block is?
Determine the required tension steel area of the T beam with given properties below. Width of flange bf = 500 mm Width of web bw = 340 mm Thickness of flange tf = 140 mm Effective depth d = 350mm Effective concretee covering d' = 75mm Compressive strength of concrete fc' = 34.5 MPa Yield stress of steel bar fy = 375 MPa Mu = 415 kN-m As = _________ mm2
concrete floor slab 100 mm thick is cast monolithic with concrete beam 2.0 m on centers. The beams have a span of 4.2 m and have a web width of 250 mm, and overall depth of 450 mm. The tensile reinforcement consists of 4-25 mm bars in two rows with 25 mm vertical clear spacing. Use material strength f’c = 21 MPa and fy = 415 MPa. Calculate the following considering a T-geometry; a) effective flange width of an interior beam in mm b) depth of uniform stress block at ultimate stage in mm ( round of to nearest whole number) c) tensile steel strain compatible with concrete strain if 0.003 ( round if 3 decimal places)