3. The aluminum and bronze cylinders are centered and secured between two rigid end-plates by tightening the two steel bolts. There is no axial load in the assembly at a temperature of 50 °F. Find the stress in the steel bolts when the temperature is increased to 200 °F. Use the following data: 1.0 in.- - 3 in.- - 4 in. 1.0 in. Aluminum cylinder Bronze cylinder Each steel bolt A (in²) 1.75 2.50 a (l°F) 12.8 x 10 10 x 10° 10.5 x 10° 12 x 10° 6.5 x 10° E (psi) 0.75 29 x 10° Aluminum Bronze

3. The aluminum and bronze cylinders are centered and secured between two rigid end-plates by tightening the two steel bolts. There is no axial load in the assembly at a temperature of 50 °F. Find the stress in the steel bolts when the temperature is increased to 200 °F. Use the following data: 1.0 in.- - 3 in.- - 4 in. 1.0 in. Aluminum cylinder Bronze cylinder Each steel bolt A (in²) 1.75 2.50 a (l°F) 12.8 x 10 10 x 10° 10.5 x 10° 12 x 10° 6.5 x 10° E (psi) 0.75 29 x 10° Aluminum Bronze

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.2.1P: A spherical balloon is filled with a gas. The outer diameter of the balloon is 20 in. and the...

See similar textbooks

Similar questions

mechanics of deformable bodies The cylindrical tank has an outer radius of 1.5m and a wall thickness of 25 mm. If the tank is pressurized to 1.5 MPa, determine the longitudinal stress.
A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 20 mm. The diameter of the pressure vessel is 450 mm, and its length is 2.0 m. Determine the maximum internal pressure that can be applied if the longitudinal stress is limited to 140 MPa, and the circumferential stress is limited to 60 MPa.
A cylindrical pressure vessel has an inner diameter of 4 ft and a thicknessof 1 2 in. Determine the maximum internal pressure it can sustain so that neither its circumferential nor its longitudinal stress component exceeds 20 ksi. Under the same conditions, what is the maximum internal pressure that a similar-size spherical vessel can sustain?
1) A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 20 mm. The diameter of the pressure vessel is 450 mm, and it's length is 2.0 m. Determine the maximum internal pressure that can be applied if the longitudinal stress is limited to 140 MPa and the circumferential stress is limited to 60 MPa 2) A compound thin cylinder has a common diameter of 100 mm, and the inner cylinder has a thickness of 2,5 mm. The radial pressure between the two cylinders is 200 KPa and the difference between the two common diameters before shrinkage was 0,004305 mm. E=200 GPa Determine : A) Thickness of the outer cylinder B) Resultant hoop stresses in both cylinders if the compound cylinder is subjected to an internal pressure of 180 KPa
A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 30 mm. The outer diamter and thickness of the pressure vessel is 500 mm and 10 mm. Its length is 2m. Determine the maximum internal pressure (MPa) that can be applied if the longitudinal stress is limited to 155 MPa, and the circumferencial stress is limited to 55 MPa.
A smooth-walled 100 mm edge steel bucket is filled with rubber to form a rubber bucket embedded within the steel bucket. If the rubber hub is compressed by a 100 kN force, determine: a) The normal contact stress between the rubber and the inner walls of the steel. b) The change in volume experienced by the rubber bucket. Consider the following: - The steel bucket is rigid. - There is no friction between the smooth walls of the steel bucket and the rubber (shear stress equal to zero between steel and rubber). - Rubber properties: E = 4 MPa and v = 0.45.
Topic: MACHINE DESIGN A submersible cylinder used in research has a cylindrical pressure hull of outside diameter 3.0 m and a wall thickness of 150 mm. It is constructed of an aluminum alloy, having a yield point of 450 MPa. Determine the tangential stress, in terms of MPa, in the cylindrical portion of the pressure hull whenthe vehicle is at its operating depth of 5500 m below the surface of the sea. Consider sea water to have a specific weight of 104 N/m3
The cylindrical tank with a spherical end cap has an outer radius of 2 m and a wall thickness of 50 mm. If the tank is pressurized to 3.5 MPa, determine the longitudinal and circumferential stresses in the cylinder, and the stress in the end cap. (Show free body diagram and complete solution)
What is the stress in a rectangular rod that is 20 mm by 30 mm in cross-section if is supporting a load of 1000 N? Express your answer in N/m2, Mpa, and psi.
Axial loads are applied with rigid bearing plates to the solid cylindrical rods shown. The normal stress in aluminum rod (1) must be limited to 20 ksi, the normal stress in brass rod (2) must be limited to 24 ksi, and the normal stress in steel rod (3) must be limited to 12 ksi. Determine the minimum diameter required for each of the three rods. Assume P = 8 kips, Q = 5 kips, R = 20 kips and S = 28 kips. Calculate F1, F2, F3 and..
1. A cylinder tankhas a maximum load of 2600 kg while the pressure is 2600 kpa. If the ultimate stress is 55 000 kpa and a factor of safety is 4.5, calculate the required wall thickness of the cylinder. Choose the correct answer below and show complete solution: a. 18.34 mm b. 14.38 mm c. 13.48 mm d. NOTC 2. A spherical tank has a diameter of 12 m, if the tangential stress of the tank is 18 Mpa, determine the maximum internal pressure of the tank can carry if the wall thickness is 25 cm. Choose the correct answer below and show complete solution: a. 150 kPa b. 15000 kPa c. 1500 kPa d. NOTC 3. A cylindrical tank has an inside diameter of 6-in and is subjected to an internal pressure of 600 psi. If the maximum stress is 1300 psi, calculate the required thickness. Choose the correct answer below and show complete solution: a. 0.1385 in. b. 0.3185 c. 0.8135 d. NOTC
At room temperature (20°C), a 0.5-mm gap exists between the ends of the rods shown. The temperature eventually reaches a value of 139°C. Determine the normal stress in the aluminum rod.