3.23: An ideal refrigeration cycle operates with R134a as the working fluid. The temperature of refrigerant in the condenser and evaporator are 40°c and -20°c respectively. The mass flow rate of refrigerant is 0.1 kg/s. Determine the cooling capacity and cop of the plant. Take enthalpy of refrigerant vapour at the end of compression as 276 kJ/kg. 40°C -20°C/ 3

3.23: An ideal refrigeration cycle operates with R134a as the working fluid. The temperature of refrigerant in the condenser and evaporator are 40°c and -20°c respectively. The mass flow rate of refrigerant is 0.1 kg/s. Determine the cooling capacity and cop of the plant. Take enthalpy of refrigerant vapour at the end of compression as 276 kJ/kg. 40°C -20°C/ 3

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 12RQ: Refrigerators currently being manufactured in the United States are using______as their refrigerant.

See similar textbooks

Similar questions

Refrigerators currently being manufactured in the United States are using______as their refrigerant.
Condensers in these refrigerators are all_______cooled.
In an ideal vapour-compression refrigeration cycle, refrigerant R-12 enters the compressor as a saturated vapour at −18 degree C and leaves the condenser as a saturated liquid at 25 degree C. The mass flow rate of the refrigerant is 0.5 kg/s, and the pressure drop in the evaporator and the condenser are negligible. Calculate: a) the refrigeration effect (rate of refrigeration or heat transfer rate in the evaporator) b)power consumed by the compressor c)the coefficient of performance of the refrigerator) d)qualityof the refrigerant after the expansion valve e)heat transfer rate in the condenser
Refrigerant R12 is used in a vapour compression cycle. The saturated vapour entersthe compressor at -18.8°C, and subsequently leaves at 75°C and 10 bar. Thesaturated liquid leaving the condenser is at 10 bar. The resulting stream is throttledand evaporated before being fed back to the compressor. a) Determine the coefficient of performance of the refrigerator. Take the specific enthalpy,h, at 10 bar and 36 K of superheat to be 163.7 kJ/kgb) Obtain the isentropic efficiency of the compressor. Take the specific entropy, s, at 10bar to be 1.188 kJ/kg
A refrigerator operating using vapor-compression cycle uses R-134a as a working fluid. The condenser temperature is 65oC and the evaporator temperature is -15oC. The compressor operates at 80% efficiency. a. Determine the coefficient of performance of the refrigeration cycle. b. How much refrigerant is needed to deliver 3 kW of cooling? c. Sketch the vapor compression cycle indicating the states of each stream (in terms of H, P, T, and S) and showing the values of energy input/output in the system d. Suppose that we replace the expansion valve in the vapor- compression cycle with a turbine that operates at 80% efficiency. Determine the coefficient of performance of the refrigeration cycle. Provide the new state properties (i.e. H, P, T and S) for this changes Please use CATT for any values needed
A two-evaporator, multiple EV,and single compression refrigeration system uses refrigerant-134a as the working fluid. The system operates evaporator 1 at 0°C, evaporator 2 at -26.4°C, and the condenser at 800kPa. The refrigerant is circulated through the compressor at a rate of 0.1kg/s and the low temperature evaporator serves a cooling load of 8 kW.Determine the cooling rate of the high-temperature evaporator, the power required by the compressor, and the COP of the system. The refrigerant is saturated liquid at the exit of the condenser and saturated vapor at the exit of each evaporator, and the compressor is isentropic.
A simple vapor - compression cycle develops 13 tons ofrefrigeration. Using ammonia as refrigerant and operating at acondensing temperature of 24 °C and evaporating temperature of-18°C and assuming that the compression are isentropic and thatthe gas leaving the condenser is saturated. Find the followinga). Draw the p-h diagramb.) Refrigerating effect in kJ/kgc.) Circulation flow in kg/mind.) Power requiremente.) Volume flow in cubic meter per minute per tonf.) Coefficient of performanceg.) Power per ton
A two-evaporator, multiple EV,and multiple compression refrigeration system uses refrigerant-134a as the working fluid. The system operates evaporator 1 at 0°C, evaporator 2 at -26.4°C, and the condenser at 800kPa. The refrigerant is circulated through the compressor at a rate of 0.1kg/s and the low temperature evaporator serves a cooling load of 8 kW.Determine the cooling rate of the high-temperature evaporator, the power required by the compressor, and the COP of the system. The refrigerant is saturated liquid at the exit of the condenser and saturated vapor at the exit of each evaporator, and the compressor is isentropic.
A compressor serves two evaporators, one providing 5 tons of cooling at -20 degree F and the other, 10 tons of cooling at 10F. The system is a vapor-compression refrigeration system using R-12 with the condenser pressure at 200 psia. Assume saturated conditions leaving the condenser and evaporators and isentropic compression. Determine (a) the refrigerant flow through each evaporator, (b) the R-12 state entering the compressor, and (c) the compressor power.
An ideal ammonia (R – 717) vapor-compression refrigeration cycle has an evaporator temperature of –20 C and a condenser pressure of 12 bar. Saturated vapor enters the compressor, and saturated liquid exits the condenser. The mass flow rate of the refrigerant is 3 kg/min. Determine the temperature of the superheated ammonia vapor exiting the compressor.
please answers fasterrr An ice-making machine in Restoran Syed operates on the vapor-compression refrigeration cycle. Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.13MPa and a °C at a rate of 0.13kg/s, and it leaves at 0.7 MPa and b °C. The refrigerantis cooled in the condenser to c°C and dMPa, and it is throttled to 0.14MPa. Disregarding any heat transfer and pressure drops in the connecting lines between the components, show the cycle on a T-s diagram with respect to saturation lines, and determine;i.the rate of heat removal from the refrigerated space,ii.the power input to the compressor, iii.the isentropic efficiency of the compressor, and iv.the COP of the refrigerator.v.if the compressor has no irreversibility, how about the COP?vi.Justify the difference between ideal and actual cycles. a= -8 b= 49 c= 25 d= 670
A refrigeration system operates on an ideal vapor compression using R-12 with an evaporator temperature of -30 C and a condenser exit temperature of 49.30C and requires 74.6 kW motor to drive the compressor. What is the capacity of the refrigerator in tons of refrigeration? Enthalpy at the condenser ,entrance = 382KJ/Kg, exit = 248.15KJ/Kg, at evaporator entrance= 248.15kJ/kg, exit =338.14kJ/kg.