A 4poles,200V,wave connected shunt motor running at 80ORPM and drawing armature current andHeld current of 50 and 1 Amp respectively. It has 500 conductor, Ra=0.50, if the efficiency of themotor70% ,Calculate:Motor output power and output torque.Electromagnetic torque.Useful flux per pole.Rotational losses.

In this question we will solve for DC motor output power ,output torque , flux, rotational…

4 4poles,200V,wave connected shunt motor running at 800RPM and drawing armature cur Held current of 50 and 1 Amp respectively. It has 500 conductor, Ra=0.50, if the efficien motor70% ,Calculate: Motor output power and output torque. Electromagnetic torque. Useful flux per pole. Rotational losses.

4 4poles,200V,wave connected shunt motor running at 800RPM and drawing armature cur Held current of 50 and 1 Amp respectively. It has 500 conductor, Ra=0.50, if the efficien motor70% ,Calculate: Motor output power and output torque. Electromagnetic torque. Useful flux per pole. Rotational losses.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Q/ dc shunt motor 4 pole with 500 condcutor , wave running at speed 1000 r.p.m the resistance of armature and field are 0.02 , 55 ohm and delivering load 43.12kwatt at terminal voltage 220 volt, the iron losses is 750 watt Torque developed by the prime mover .........and The torque developed by the armature ........... when running at 1000 r.p.m * Cu loss is……watt * Mechanical , electrical and overall efficiency …… Output of the prime motor…….kwatt * The load current ,,,,,,,,,,,,when the speed drops to 800 r.p.m. if If is unchanged ? * Flux per pole is......... wb * E.M.F. generated is………….volt *
Of a shunt excited DC generator, Excitation winding internal resistance Rf = 2.5 Ω Armature winding internal resistance Ra = 0.5 Ω A rheostat has been placed in the excitation circuit to keep the machine's end voltage constant at Va = 30 V. Machine Voltage magnetization induced in the armature while operating at n = 1400 rpm at If = 7 A excitation current It is determined as Ea = 30 V from its characteristic. According to this, a) With peak voltage Va = 30 V, excitation current If = 7 A, power supplied to the load when the speed n = 1400 rpm What is the resistance of the rheostat? b) Spindle revolutions are reduced to n = 1000 rpm. In this case Va = 30 V and Ea = 37 V constant What value should the rheostat be adjusted to keep it? Calculate the power given to the load in this new case.
Q/ A 250 V dc series motor having armature and field resistance 0.25 ohm and 0.15 ohm respectively runs, at 800 rpm, while taking 50 A from the supply. Assuming the magnetic circuit of the motor to be unsaturated, determine its speed, when a divertor of 0.3 ohm resistance is connected in parallel with the field winding of the motor, which is subjected to a load torque whose torque (a) remains constant regardless of speed, (b) varies in direct proportion to the speed, (c) varies as the square of the speed.
A separately excited DC generator has rated terminal voltage and full load armature current of 220v and 42+16. A respectively and rated speed of 1650 rpm. The generator armature resistance Ra =0.3 π and field resistance Rf =100+16 π and field voltage of 150v. Calculate: a) The induced emf and torque at full load. b) The emf at rated speed when the field voltage is changed to 110 v.
A small permanent magnet DC motor has an armature resistance of 3.5ohm and armature voltage of 7V,the motor archived a no load speed of 11,500r/min while drawing an armature current of 15mA. Determine the motor torque constant Km (V/(rad/sec))
Q1) A 4-pole, separately excited, wave wound DC machine with 0.12 armature resistance is rated for 230 V and 5 kW at a speed of 1200 rpm. If the same armature coils are reconnected to forms a lap winding, what is the power (in kW) at 1200 rpm of the reconnected machine if the field circuit is left unchanged? Also calculate the voltage regulation in both cases
Q1) A 4-pole, separately excited, wave wound DC machine with 0.12 armature resistance is rated for 230 V and 5 kW at a speed of 1200 rpm. If the same armature coils are reconnected to forms a lap winding, what is the power (in kW) at 1200 rpm of the reconnected machine if the field circuit is left unchanged? Also voltage regulation in both cases
The full load slip of a 4-pole, 60Hz, 440V (line-to-line) three phase induction motor is 0.05. (i). What is the speed of the rotating stating? What is the frequency (in Hz) of the rotor current? (ii). When the output power of the motor is 90 hp at a speed of 1732 rmp, rotational losses (which include frictional and core losses) are 10,100W, while copper losses for both the rotor and stator total 3700W. Determine the motor efficiency and line current, assuming the motor has a 0.8pf lagging under the conditions.
5 kW, 100 v is written on the plate of the dc serial motor. The armature resistance of the motor is Ra=0.15 ohm series field winding resistance Rs= 0.15. Assuming Prot = 100 W as an average and constant value over all operating ranges of the engine. Calculate the armature current at half load, the back electromagnetic force at full load, and the current drawn by the motor at start-up.
A short-shunt compound DC generator supplies a current of 100 A at 220 V. If the resistance of the shunt field is 50 ohms, of the series field 0.025 ohms, of the armature 0.05 ohm, the total brush drop is 2 V and the iron and friction losses amount to 1 kW, determine the following: The armature current, Amp The generated voltage, V The copper losses, W The output power of the prime mover, kW The generator efficiency, %
The armature winding resistance of a long shunt connected DC generator is 0.4ohm, the resistances of the shunt and serial field windings are 125 ohms and 0.1 ohms, respectively. While the generator supplies 8KW of power to the load it feeds, which is the voltage it produces since the output voltage is 250V?
A Four pole, 50kW, 250 Volt Long Shunt DC Machine Generator has a shunt field current of 1.5 A. It is Lap-winded with 872 conductors, and a rated speed of 1200 RPM. Where, Ra = 100 mohms, and Rse = 0.05 ohms. Solve for the following: Armature Current Generate EMF Total Flux per pole