4. The air-oil-water system shown in the figure is at 90°F. If gage A reads 16.1 psi abs and gage B reads 2psi less than gage C, compute (a) the specific weight of the oil and (b) the reading of gage C. 16.1 Ib /in? abs Air 3ft 2ft Oil 2ft Water 3ft

4. The air-oil-water system shown in the figure is at 90°F. If gage A reads 16.1 psi abs and gage B reads 2psi less than gage C, compute (a) the specific weight of the oil and (b) the reading of gage C. 16.1 Ib /in? abs Air 3ft 2ft Oil 2ft Water 3ft

Name: 4. The air-oil-water system shown in the figure is at 90°F. If gage A
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 4. The air-oil-water system shown in the figure is at 90°F. If gage A reads 16.1 psi absand gage B reads 2psi less than gage C, compute (a) the specific weight of the oil and(b) the reading of gage C.16.1 Ib /in? absAir3ft2ftOil2ftWater3ft

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.35P: The weight of the cylindrical tank is negligible in comparison to the weight of water it contains...

See similar textbooks

Similar questions

For the tank shown in the figure, determine the reading of the pressure gage if: (a) H =2 m, h =10 cm.(b) H = 0.8 m, h = 20 cm.(c) H = 6 ft, h = 4 in.(d) H =2 ft, h = 8 in.
Parts A-C and Label them Question : Water flows downward in a pipe at 45°, as shown in figure below. The pressure drop p1 − p2 is partly due to gravity and partly due to friction. The mercury manometer reads a 6-in height difference. Part [A] - What is the total pressure drop p1 − p2 in lbf/in2? Part [B] - What is the pressure drop due to friction only between 1 and 2 in lbf/in2? Part [C] - What is the pressure drop due to gravity only between 1 and 2 in lbf/in2?
What is the altitude an airplane is flying if the measured air pressure is 640.12471304150 psf? Assume standard condition.
The gage pressure of the air in the tank shown in Fig. is measured to be 80 kPa. Determine the differential height h of the mercury column.
A container is filled with oil. A pipe is connected to the container at point C and the owner left the cover open, exposing the oil to the atmospheric pressure at point B and point E. What will be the maximum absolute pressure (psi) using the height of the oil from the previous problem. The density of the oil used is = 1.78 slug/ft^3*
In the figure, fluids A and B have specific gravities of 0.75 and 1.00, respectively. If mercury is used as the manometer liquid, determine the pressure difference between A and B in psi.
An open tank contains water up to a depth of 1.2m from the bottom and above it mercury for a depth of 0.8m and above it an oil of specific gravity 0.8 for a depth of 1m. Assume the atmospheric pressure is 1 bar. Find the gauge pressure and absolute pressure i) at the bottom of the container, ii) at the interface of water and mercury and iii) at the interface of an oil and mercury. ( i) At bottom Gauge Pressure = ________________N/m2 Absolute Pressure =_________________ N/m2 ii) At the interface of water and mercury Gauge Pressure =_______________ N/m2 Absolute pressure =_____________ N/m2 iii) At the interface of oil and mercury Gauge Pressure =_____________ N/m2 Absolute Pressure = _________________ N/m2
The test tube opens at 293 K with 15 cm Hg at the bottom, and 7.5 cm of water above the Hg. Calculate the pressure at the bottom of the tube if the atmospheric pressure is 760 mm Hg. Use the density of 13:55 g / cm3 for Hg and 0998 g / cm3 to air.Berikan answers in terms of dyne / cm2,psia, and kN / m2 • (see conversion table). a. … KPa. b. … Dyne / cm2. c. … Psia.
Assuming specific weight of air to be constant at 12 N/m3, what is the approximate height of Mount Banahaw if a mercury barometer at the base of the mountain reads 654 mm and at the same instant, another barometer at the top of the mountain reads 480mm.
The test tube opens at 293 K with 13 cm Hg at the bottom, and 5.6 cm water above Hg. Calculate the pressure at the bottom of the tube if the atmospheric pressure is 760 mm Hg. Use a density of 13.55 g / cm3 for Hg and 0.998 g / cm3 for water. Give answers in terms of dyne / cm2, psia, and kN / m2 • (See conversion table). = kPa. = ..... dyne / cm2. = .... psia = ....
A gasoline line is connected to the pressure gage through a double-U manometer, as shown in the figure. If the reading of the pressure gage is 370 kPa, determine the gage pressure of the gasoline line.6)
Q8: A gasoline line is connected to a pressure gage through a double-U manometer, as shown in Fig. If the reading of the pressure gage is 370 kPa, determine the gage pressure of the gasoline line.