Please answer all subpart asap I will like it please ASAP for like thisIt's urgent please.. 5. A 20-KVA 220-V 60-Hz Y-connected 3-phase salient-pole synchronous generatorsupplies rated load at 0.707 lagging power factor. The per phase constants of the machineare R₂ = 0.5 Q and X¿ = 2Xq = 4.0 SQ.(a) Determine the terminal voltage, V₁.(b) Determine the stator current, Ia.(c) Determine the power angle, d.(d) Determine the direct current, Id.(e) Determine the excitation voltage, Ef.(f) Determine the voltage regulation.(g) Draw the phasor diagram.

Given: In this question, the given details are, A 20 kVA, 220 V,60 Hz Y-connected 3-phase…

5. A 20-KVA 220-V 60-Hz Y-connected 3-phase salient-pole synchronous generator supplies rated load at 0.707 lagging power factor. The per phase constants of the machine are R₂ = 0.5 M and X₁ = 2x₁ = 4.0 2. (a) Determine the terminal voltage, Vt. (b) Determine the stator current, Ia. (c) Determine the power angle, 8. (d) Determine the direct current, Id. (e) Determine the excitation voltage, Ef. (f) Determine the voltage regulation. (g) Draw the phasor diagram.

5. A 20-KVA 220-V 60-Hz Y-connected 3-phase salient-pole synchronous generator supplies rated load at 0.707 lagging power factor. The per phase constants of the machine are R₂ = 0.5 M and X₁ = 2x₁ = 4.0 2. (a) Determine the terminal voltage, Vt. (b) Determine the stator current, Ia. (c) Determine the power angle, 8. (d) Determine the direct current, Id. (e) Determine the excitation voltage, Ef. (f) Determine the voltage regulation. (g) Draw the phasor diagram.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter12: Power System Controls

Section: Chapter Questions

Problem 12.11P

See similar textbooks

Similar questions

A 3-Phase 10Kva, 400 V, 50Hz star connected alternator supplies a rated load at 0.8 power factor lagging. If the armature resistance per phase is 0.5Ჲ and the synchronous reactance is 10Ჲ, using the e.m.f method, estimate the alternator’s voltage regulation
3-phase,50 Hz, delta connected generator, its stator winding having 12sninai ns pole pair and 6 conductors in each, if the total air gap flux is 160mwb. Find the terminal voltage. The prime mover speed is 750rpm.
a) With the aid of a diagram and phasor diagram, explain the double-reactance concept for salient-pole alternators. b) 3-phase star-connected synchronous generator supplies a current of 10A having phase angle of 20° lagging 400V (phase voltage). Given the direct and quadrature axis reactances as 10ohms and 6.5ohms respectively and neglecting armature resistance, Find: 1. The load angle 2 The direct and quadrature components of armature currents 3. Voltage regulation
A three-phase, 250 MVA, 16 kV rated synchronous generator is feeding into an infinite bus bar at 15 kV. The generator has a synchronous reactance of 1.62 pu. It is found that the machine excitation and mechanical power input are adjusted to give E = 24 kV and power angle δ = 30◦. a) Determine the line current and active and reactive power fed to the generator terminal. b) With reference to part (a) current is to be reduced by 20% at the same power factor by adjusting mechanical power input to the generator and its excitation. Determine E, angle δ and mechanical power input. c) With the reduced current as in part (c), the power is to be delivered to generator terminal at unity power factor, what are the corresponding values of E and δ and also the mechanical power input to the generator. Per-unit values are given on machine rating as the base.
A three-phase, 250 MVA, 16 kV rated synchronous generator is feeding into an infinite bus bar at 15 kV. The generator has a synchronous reactance of 1.62 pu. It is found that the machine excitation and mechanical power input are adjusted to give E = 24 kV and power angle δ = 30 degree. a) Determine the line current and active and reactive power fed to the generator terminal. b) The mechanical power input to the generator is increased by 20% from that in part (a) but its excitation is not changed. Find the new line current and power factor. c) With reference to part (a) current is to be reduced by 20% at the same power factor by adjusting mechanical power input to the generator and its excitation. Determine E, angle δ and mechanical power input. d) With the reduced current as in part (c), the power is to be delivered to generator terminal at unity power factor, what are the corresponding values of E and δ and also the mechanical power input to the generator. Per-unit values are given on…
The effective resistance of a 2200 V, 50 Hz, 440 KVA, 1 -phase alternator is 0.5 ohm. On short-circuit, a field current of 40 A gives the full load current of 200 AS. The electromotive force on open-circuits with same field excitation is 1160 V. Then the synchronous impedance and reactance is _______ ohm and _______ ohm respectively.
A 3-phase, Y-connected, 60 Hz, 6 MVA, 13.2kV synchronous generator has a synchronous reactance of 0.9 ohms and negligible resistance. It supplies a constant power load at rated conditions at 0.83 pf lagging. At the load, the line current lags the line-to-neutral voltage by how many degrees?
A3 phase , 15 kV, 60 Hz, 30 MVA, Y-connected cylindrical-rotor synchronous machine generator has Ra =0.5 Ω per phase and Xs =5.2 Ω per phase. The generator delivers the rated load at 15 kV and 0.85 lagging power factor. Determine the excitation voltage, Ef, for this operating condition.
A power plant comprises three turbine-generators rated 1000 MW, 800 MW and 500 MW respectively. The regulation constant of each generator is 0.05 pu based on its own rating. Each unit is initially operating at one-half of its own rating, when the system load suddenly increases by 300 MW. Calculate the following:a) Per-unit area frequency response characteristic on a 1000 MW system base.b) Steady-state drop in area frequency [CR4]c) The share of the load increase on each generator.d) Total load on each generator after the increase in system load.Assume the reference power setting of each turbine is unchanged.
A 24,000 kVA, 17.32 kV, three-phase, 60 Hz synchronous reactance of 5 Ω/phase and negligible armature resistance. At a certain excitation, the generator delivers rated load, 0.8 pf lagging to an infinite bus bar at a line the line voltage of 17.32 kV. Determine the excitation voltage per phase
Question 1: Figure 1 shows a single-line diagram of a three-phase, 60-Hz synchronous generator, connected through a transformer and parallel transmission lines to an infinite bus. All reactances are given in per-unit on a common system base. If the infinite bus receives 1.0 per unit real power at 0.95 p.f. lagging, determine (a) the internal voltage of the generator and (b) the equation for the electrical power delivered by the generator versus its power angle δ.
a single-phase, 10-kVA, 200-V, generator has an internal impedance Z, of 2 Q. Using the ratings of the generator as base values, determine the generated per-unit voltage that is required to produce full-load current under the short-circuit condition.