5. A timber joist of 95mm x 450 mm are placed on a spacing of 0.50m on centers. Given that their end rest upon steel beams of 150mm flange width and on a 6.5m on centers. Compute the maximum allowable working load per sqm. that the joist could carry including the weight of the floor and joists. Ew = 11GPA. a. So that it will not exceed the allowable bending stress of 16MPA. 95mm b. So that it will not exceed the allowable shearing stress of 0.7MPa. c. So that it will not exceed the allowable deflection of 1/360 of the span. 450 mm 0.50 0.50 0.50 0.50

5. A timber joist of 95mm x 450 mm are placed on a spacing of 0.50m on centers. Given that their end rest upon steel beams of 150mm flange width and on a 6.5m on centers. Compute the maximum allowable working load per sqm. that the joist could carry including the weight of the floor and joists. Ew = 11GPA. a. So that it will not exceed the allowable bending stress of 16MPA. 95mm b. So that it will not exceed the allowable shearing stress of 0.7MPa. c. So that it will not exceed the allowable deflection of 1/360 of the span. 450 mm 0.50 0.50 0.50 0.50

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The floor system of a factory consists of a 5”-thick normal weight reinforcedconcrete slab resting on four steel floor beams (A = 14 in2) that, in turn, aresupported by two steel girders (A = 40 in2), as shown in the plan below.a. Should this slab be idealized as one-way spanning or two-way spanning?b. Draw the free-body diagram for the dead loads on beam BF and label themagnitude of all loads.c. Draw the free-body diagram for the dead loads on girder AD and label themagnitude of all loads.d. What is the axial load carried by column A?
A 100 mm x 200 mm beam 6 m long is supported by a roller at its ends and at midspan. It carries a uniform load of 7.5 kN/m excluding its own weight, if the Weight of the wood is 5.6 kN/m² and the support at midspan is 26.5 kN, Determine the shear and moment diagram of the beam.
A masonry terrace of 65mm thick concrete surface with 35mm thick cement tiles rest on 100mmx 200mmtimber spaced at 250mm on centers acting as simple beam with effective span of 3.8 meters. Weight of woodis7.5Kn/M^3 and masonry to be 18KN/m^3. Ew = 13.8GPa. Given:Allowable stresses for bending = 12 MPaFor shear parallel to the grain = 0.9 MPaDeflection = 1/360 of spana. Determine the uniform load it could support with respect to bending.
A floor is supported by 75 mm x 200 mm wooden joists spaced at 400mm on centers with an effective span of 3m. The total floor load transmitted to the joists is 5kPa. If the unit weight of wood is 6.3 kN/m3 and elastic modulus of wood is 12x103 MPa. W Tributary 400 6001 mm -3m Was kPa FO 400 in Floor (a) Determine the maximum bending stress (fb). (b) Determine the maximum shearing stress (fy). (c) Determine the maximum deflection
The beam is made up of four boards, and is subjected to a moment of M=200 kip in, calculate the resultant force onthe top board C.
The floor system used in a school classroom consists of a 4-in. reinforced stone concrete slab. Sketch the loading that acts along the joist BF and side girder ABCDE. Set a = 10 ft, b = 30 ft. What is the reaction at point F in kips?
A masonry terrace of 65mm thick concrete surface with 35mm thick cement tiles rest on 100mmx 200mmtimber spaced at 250mm on centers acting as simple beam with effective span of 3.8 meters. Weight of woodis7.5Kn/M^3 and masonry to be 18KN/m^3. Ew = 13.8GPa. b. Determine the uniform load it could support with respect to shear.
A floor opening in a building is to be closed by pouring a concrete slab. The proposed framing is composed ofwood joist assumed to be simply supported and given with a total load of 4 kPa. What is the maximum flexural stress in 40 mm x 190 mm wood joist if its span is 3 m and spaced atevery 0.30 m on centers?a. 5.61 MPa c. 6.78 MPab. 7.23 MPa d. 4.65 MPa What is the maximum shearing stress in the said joists?a. 0.40 MPa c. 0.36 MPab. 0.69 MPa d. 0.54 MPa
Find the Maximum Shear andMoment.? can you solve in 20 mins?
A masonry terrace of 75 mm concrete surface with 25 mm cement tiles rests on a 75mm×200mm lumber spaced @300mm on centers acting as simple beam with an effective span of 3.6 m. Weight of wood is 7.5 kN/m3 and masonry to be 24kN/m3. Ew=13800 mPa. The allowable stresses are 14 mPa for bending, 0.80 mPa for shear parallel to grain and deflection is 1/360 of span. What is maximum superimposed load that can be carried by the beam?
A woode. Footbridge in a park has a span of 12 m between centers of end support .two logs of approximately constant diameter are to be used.eacg log must be capable of supporting a uniform load of 8 kN/m. If the allowable stresses is 8.3 MPa in bending.(a) What is the diameter of the log ? Round off the nearest tens
A triangular wooden beam width 150 mm base and 300 mm height carries two concentrated load of 20 kN at third points. If the simple span of the beam is 6 m. Compute the maximum shearing stress of the beam. a. 0.58 MPa b. 1.33 MPa c. 0.48 MPa d. 0.86 MPa