5. Calculate the flux per pole required on full-load for a 50 kW, 400 V, 8-pole, 600 r.p.m. d.c. shunt generator with 256 conductors arranged in a lap-connected winding. The armature winding resistances is 0.1 S2, the shunt field resistance is 200 S2 and there is a brush contact voltage drop of 1 V at each brush on full- load. [0.162 Wb]

5. Calculate the flux per pole required on full-load for a 50 kW, 400 V, 8-pole, 600 r.p.m. d.c. shunt generator with 256 conductors arranged in a lap-connected winding. The armature winding resistances is 0.1 S2, the shunt field resistance is 200 S2 and there is a brush contact voltage drop of 1 V at each brush on full- load. [0.162 Wb]

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter12: Power System Controls

Section: Chapter Questions

Problem 12.4P

See similar textbooks

Similar questions

A d.c. shunt machine has armature and field resistances of 0.025 Ω and 80 Ω respectively. When connected to constant 400-V bus-bars and driven as a generator at 450 r.p.m., it delivers 120 kW. Calculate its speed when running as a motor and absorbing 120 kW from the same bus-bars
A 220 V , 60 Hz , supply is connected to 200 – turn armature winding of reluctance 1.7x105 At / Wb . Find the magnetizing reactance , the rms values of the ( magneto – motive force , exciting and armature currents , magnetic flux ) , and the inductance Draw the phasor diagram of the circuit .
The armature winding resistance of a long shunt connected DC generator is 0.4ohm, the resistances of the shunt and serial field windings are 125 ohms and 0.1 ohms, respectively. While the generator supplies 8KW of power to the load it feeds, which is the voltage it produces since the output voltage is 250V?
An 8 pole, lap-wound armature has 1200 conductors and a flux pole is 0.06wb. Determine the e.m.f generated when the dc machine running at 600 rev/min.
A 500 V, 250 kW, long shunt compound generator induces an e.m.f. of 480 V whenrunning at 1000 r.p.m. no load. On full load the spped of the machine drops to 975r.p.m. the flux increases by 15% and the terminal voltage rises to 500 V. If theseries and shunt field resistances are 0.02 ohm and 100 ohms respectively,calculate the armature resistance. Assume a voltage drop of 1V per brush.[Ans.
A 220 V , 60 Hz , supply is connected to 200 – turn armature winding of reluctance 1.7x105 At / Wb . Find : the magnetizing reactance the rms values of the ( magneto – motive force , exciting and armature currents , magnetic fluxflu the inductance Draw the phasor diagram of the circuit
A 220 V dc machine has an armature resistance of 1ohm if the full load current is 20 A, the difference of induced voltage, when the machine is running as a motor and generator, is *
DC MACHINE TORQUE The armature of a dc motor has 648 conductors, 65 % of which are directly under thepole where the flux density is 48,000 lines per in2. If the core diameter is 7 inchesand its length is 4 inches and the current in each conductor is 20 A. What is thetorque exerted in the armature in N-m?
Determine the efficiency of a 1500kVA, 2300-V, 3-phase, Wye connected alternator, which operates at a rated output, with a power factor of 80%, The DC armature resistance at 0.08-ohm. The field takes a 70-Aat 120-V from the exciter equipment. Friction and windage losses are 35-kW, iron losses is 15-kW and stray power losses is 1.2-kW. The effective armature winding resistance is 1.8 times the DC value.
N K © M =] v : @& docs.google.com/forms/d/¢ 2 Add file Q 1/ B) What is the work of Commutator . * &2, Add file Q 2) The following information is given for a 300-kW, 600-V, long-shunt compound generator : Shunt field resistance = 75 Q, armature resistance including brush resistance = 0.03 Q, commutating field winding resistance = 0.011Q, series field resistance = 0.012 Q, diverter resistance = 0.036 Q. When the machine is delivering full load, calculate the voltage and power generated by the armature * 2 Add file Q 3) A four pole aenerator havina - >
A 1500 kW, 550 V, 16 pole generator runs at 150 rev. per min. What must be the useful flux if there are 2500 conductors lap-connected and the full-load copper losses being 25 kW? Calculate the area of the pole shoe if the gap density has a uniform value of 0.9 wb/m2 and find the no-load terminal voltage, neglecting armature reaction and change in speed.
A long-shunt compound generator supplies 50 kW at 230 V. the total field- and armature circuit resistances are 46 ohms and 0.03 ohms , respectively. The brush-contact drop is 2 V. Determine the percent voltage regulation. Neglect the armature reaction.