8–22. The block brake is used to stop the wheel from rotating when the wheel is subjected to a couple moment Mo = 360 N • m. If the coefficient of static friction between the wheel and the block is µ, = 0.6, determine the smallest force P that should be applied. 1m -0.4 m B 0.05 m Mo 0.3 m Probs. 8-22/23

8–22. The block brake is used to stop the wheel from rotating when the wheel is subjected to a couple moment Mo = 360 N • m. If the coefficient of static friction between the wheel and the block is µ, = 0.6, determine the smallest force P that should be applied. 1m -0.4 m B 0.05 m Mo 0.3 m Probs. 8-22/23

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.63P: The leather rein used to fasten the horse to the hitching rail weighs 3.5 oz per foot. The...

See similar textbooks

Similar questions

The shaft has a square-threaded screw with a lead of 8 mm and a mean radius of 15 mm. If it is in contact with a plate gear having a mean radius of 30 mm, determine the resisting torque M on the plate gear which can be overcome if a torque of 7 N⋅m is applied to the shaft. The coefficient of static friction at the screw is μB =0.2. Neglect friction of the bearings located at A and B.
The block brake consists of a pin-connected lever and friction block at B. The coefficient of static friction between the wheel and the lever is μs = 0.3, and a torque of 5 N ⋅m is applied to the wheel. Determine if the brake can hold the wheel stationary when the force applied to the lever is (a) P = 30 N, (b) P = 70 N Draw the free-body diagram of the lever.
The single-plate clutch transmits the torque C from the input shaft on the left to the output shaft on the right. Compression springs between the clutch housing and the pressure plate provide the necessary pressure on the friction surface. The splines prevent the clutch plate from rotating relative to the output shaft. If Ri=4 in. and R0=9 in., determine the total force that must be applied to the pressure plate by the springs if the clutch is to transmit a torque of C=56lbft when it is new.
The screw of the clamp has a square thread of pitch 0.16 in. and a mean diameter of 0.6 in. The coefficient of static friction between the threads is 0.4. Determine (a) the torque C0 that must be applied to the screw in order to produce a 28-lb clamping force at A; and (b) the torque required to loosen the clamp.
The block brake is used to prevent the wheel from rotating when it is subjected to a torque moment M0. If the coefficient of static friction between the wheel and the block is us, determine the minimum force P that must be applied.
Couple forces of F= 35N are applied to the handle of the machinist's vise. The guid at B is smooth. The Single square threaded screw has a mean radius of 6 mm and a lead of 8 mm, and the coefficient of static friction is us=0.27
The tractor has a weight of 13500 lb and the coefficient of rolling resistance is a = 1.9 in . Determine the force P needed to overcome rolling resistance at all four wheels and push it forward.
the 31mm diameter screw has a double square theread with pitch of 6 mm and a lead of 12 mm .the screw and it's mating threads in the fixed block are graphite- lubricated and have a friction coefficient of 0.09. M=51N.m is applied to the right-hand portion of the shaft , determine (a) the force P required to advance the shaft to the right (b) the force P which would allow the shaft to move to the left at constant speed
The wheel is subjected to a torque of M = 50 N If the coefficient of 0 kinetic friction between the band and brake and the rim of the wheel is 4k=0.3, determine the smallest horizontal force P that must be applied to the lever to stop the wheel.
Couple forces of F= 35 N are applied to the handle of the machinist's vise. The guide at B is smooth. The single square-threaded screw has a mean radius of 6 mm and a lead of 8 mm , and the coefficient of static friction is μs= 0.27.
The wheel is subjected to a torque of M = 90 N⋅m . The coefficient of kinetic friction between the band brake and the rim of the wheel is μk=0.3. (Figure 1) Determine the smallest horizontal force P that must be applied to the lever to stop the wheel.
The truck has a mass of 1.25 Mg and a center of mass at G. The coefficient of static friction between the wheels and the ground is Uw = 0.5, and between the crate and the ground, it is uc = 0.4. Determine = = the greatest load it can move if (a) the truck has rear-wheel drive while the front wheels are free to roll. (b) the truck has four-wheel drive.