(9) A refrigerant 22 refrigeration system carries a load of 82 kW at an evaporator pressure of 354 kPa and a condenser pressure of 1460 kPa. The liquid refrigerant is subcooled by 4 degrees before entering the expansion valve and the vapor is superheated by 5 degrees before entering the compressor. The compressor operates at 28 r/s. The stroke-to-bore ratio of the twin-cylinder compressor is 1.20 and the actual volumetric efficiency is 82 per cent. Determine (a) mass flow rate of refrigerant, (b) mass flow rate of cooling water in the condenser for a 7-degree change in temperature, and (c) the bore and stroke. Ans. (a) 0.5025 kg/s, (b) 3.43 kg/s, (c) 9.2 x 11 cm

(9) A refrigerant 22 refrigeration system carries a load of 82 kW at an evaporator pressure of 354 kPa and a condenser pressure of 1460 kPa. The liquid refrigerant is subcooled by 4 degrees before entering the expansion valve and the vapor is superheated by 5 degrees before entering the compressor. The compressor operates at 28 r/s. The stroke-to-bore ratio of the twin-cylinder compressor is 1.20 and the actual volumetric efficiency is 82 per cent. Determine (a) mass flow rate of refrigerant, (b) mass flow rate of cooling water in the condenser for a 7-degree change in temperature, and (c) the bore and stroke. Ans. (a) 0.5025 kg/s, (b) 3.43 kg/s, (c) 9.2 x 11 cm

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter22: Condensers

Section: Chapter Questions

Problem 7RQ: When a standard-efficiency air-cooled condenser is used, the condensing refrigerant will normally be...

See similar textbooks

Similar questions

When a standard-efficiency air-cooled condenser is used, the condensing refrigerant will normally be higher in temperature than the entering air temperature.
Condensers in these refrigerators are all_______cooled.
Welded ______sealed compressors are normally used in household refrigerators.
What are the approximate temperature ranges tor low-, medium-, and high-temperature refrigeration applications?
Four methods for controlling head pressure in an air-cooled condenser are ______, ______, _______, and
The defrost cycle in a domestic refrigerator may be terminated by two methods: ___and___.
The condensing pressure is 260 psig and the condenser outlet temperature is 108F for R-22. By how many degrees is the liquid subcooled in the condenser? A. 12F B. 42F C. 7F D. 14F
If the evaporating pressure was 76 psig for R-22 and the compressor inlet temperature was 65F, what would be the total superheat entering the compressor? A. 11F B. 21F C. 10F D. 20F
What is the common refrigerant used in absorption refrigeration machines?
How will oversizing the buffer tank on a water-to-water heat pump system affect the run time of the system?
A refrigerant 22 refrigeration carries a load of 82 kW at an evaporator pressure of 354 kPa and a condenser pressure of 1460 kPa. The liquid refrigerant is subcooled by 4 degrees before entering the expansion valve and the vapor is superheated by 5 degrees before entering the compressor. The stroke-to-bore ratio of the twin-cylinder compressor is 1.20 and the actual volumetric efficiency is 81 percent. Determine: a. The mass flowrate of the cooling water in the condenser for a 7-degree change in temperature, b. The bore and stroke
A refrigerant 22 refrigeration system carries a load of 82 kW at an evaporator pressure of 354 kPa and a condenser pressure of 1460 kPa. The liquid refrigerant is subcooled by 4 degrees before entering the expansion valve and the vapor is superheated by 5 degrees before entering the compressor. The compressor operates at 28 r/s. The stroke-to-bore ratio of the twin-cylinder compressor is 1.20 and the actual volumetric efficiency is 82 per cent. Determine (a) mass flow rate of refrigerant, (b) mass flow rate of cooling water in the condenser for a 7-degree change in temperature, and (c) the bore and stroke. Ans. (a) 0.5025 kg/s, (b) 3.43 kg/s, (c) 9.2 x 11 cm