900 mm 700 mm An experimental device imparts a force of magnitude F=250 N to the front edge of the rim at A to simulate the effect of a slam dunk. B 6 > The moment of the force F about point O is.... > The moment of the force F about point B is.... > The location of point C (from the base at O to the location on the ground where the force imparts zero moment) 300 mm is... 3050 mm (Hint: The distance d from point O to point C is positive if C is to the right of O, and negative if to the left). 106.25 N.m CW, 141.7 N.m CW, 200 mm(to the right of O) 114.5 N.m CW, 157.2 N.m CW, 688 mm (to the left of 0) 140 N.m CW, 190 N.m CW, 584 mm (to the right of O) 140 N.m CW, 190 N.m CW, 584 mm (to the left of O)

900 mm 700 mm An experimental device imparts a force of magnitude F=250 N to the front edge of the rim at A to simulate the effect of a slam dunk. B 6 > The moment of the force F about point O is.... > The moment of the force F about point B is.... > The location of point C (from the base at O to the location on the ground where the force imparts zero moment) 300 mm is... 3050 mm (Hint: The distance d from point O to point C is positive if C is to the right of O, and negative if to the left). 106.25 N.m CW, 141.7 N.m CW, 200 mm(to the right of O) 114.5 N.m CW, 157.2 N.m CW, 688 mm (to the left of 0) 140 N.m CW, 190 N.m CW, 584 mm (to the right of O) 140 N.m CW, 190 N.m CW, 584 mm (to the left of O)

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.78P: The figure shows a steel bar being processed by a rolling mill. Given that P=80kN and r =0.016,...

See similar textbooks

Similar questions

The 12-lb force is applied to the handle of the toggle cutter. Determine the force exerted by the cutting blade CB on the workpiece E.
The figure models the handle of the water cock described in Prob. 4.9. Draw the FBD of the handle, neglecting its weight. Count the unknowns.
Show that all diagonal members of the truss carry the same force, and find the magnitude of this force.
An experimental device imparts a force of magnitude F = 225 N to the front edge of the rim at A to simulate the effect of a slam dunk. Determine the moments of the force F about point and about point B. Finally, locate, from the base at 0, a point Con the ground where the force imparts zero moment.
A basketball player attempts a slum-dunk (unsuccessfully) as shown in the ?gure. The basketball bounces on the glass generating a horizontal force F⃗1 = 0.5 kN applied at E. The player hits and pushes the hoop at G generating a sloped force F⃗2 = 2.3 kN. The angle α that the line of action of F⃗2 forms with the horizontal line is 30.0o. Additional two forces and a couple are created due to the slum-dunk. These forces are found at D, F⃗3 = 10.0 kN and F⃗4 = 1.0 kN. The force F⃗3 forms an angle β = 25.0o with the horizontal line as shown in the ?gure. The couple M⃗ 1 = 50.0 kNm is clockwise. Do: Find the resultant R⃗ and the resultant moment M⃗ C of the system of forces with respect to point C. Substitute the equivalent force-couple system from the previous point with a single force P⃗ . Find the location of the line of action of P⃗ with the axes X and Y located with the origin of the axes at A and sketch the location of the line of action and direction of P⃗ with respect to A on X…
The bent rod is supported by a smooth surface at B and by a collar at A, which is fixed to the rod and is free to slide over the fixed inclined rod. Suppose that F = 160 lb and M = 400 lb⋅ft . Determine the magnitude of the reaction force on the rod at B and the magnitude of the reaction force on the rod at A. Determine the moment of reaction on the rod at A.
It is intended to remove a stake from the ground by means of two ropes, as shown in the figure. Knowing the magnitude and direction of the force exerted on one string, determine the magnitude and direction of the force P that must be exerted on the other string if the resultant of the two forces is to be a 40-lb vertical force. -The value of P will be-What is the Angle of Force P
Four tugboats are bringing an ocean liner to its pier. Each tugboat exertsa 5000-lb force in the direction shown. Determine (a) the equivalent forcecouple system at the foremast O, (b) the point on the hull where a single,more powerful tugboat should push to produce the same effect as theoriginal four tugboats.
Calculate the moments about the bolt when force F1 is removed and F2 is applied.
An experimental device imparts a force of magnitude F= 38 Ib to the front edge of the rim at A to simulate the effect of a slam dunk. Compute the moment of the force F about point O and about point B. The moments are positive if counterclockwise, negative if clockwise. Finally, locate a point C from the base at O to the location on the ground where the force imparts zero moment. The distance d from point O to point C is positive if C is to the right of O, and negative if to the left. Assume a = 36 in., b = 28 in., h = 12 in., H = 10 ft, c= 3, and d = 5.
In order to unscrew the tapped faucet A , a plumber uses two pipe wrenches as shown. By exerting a 40-lb force on each wrench at a distance of 10 in. from the axis of the pipe and in a direction perpendicular to the pipe and to the wrench, he prevents the pipe from rotating, and thus he avoids loosening or further tightening the joint between the pipe and the tapped elbow C . Determine (a) the angle 0 that the wrench at A should form with the vertical if elbow C is not to rotate about the vertical, (b) the force-couple system at C equivalent to the two 40-lb forces when this condition is satisfied.
PLEASE ANSWER IN COMPLETE AND CLEAR SOLUTIONS. INCLUDE NECESSARY FREE-BODY DIAGRAMS. The line of action of force F1 = 377 N is passing through point A(+2,+3,+1) towards B(+5,+5,+4), while that of force F2 = 466 N is through point C(+3,+1, –1) towards D(–2, –3, –4). Use a right-handed coordinate system. a. Determine the moment of force F1 about the origin.b. Determine the moment of force F2 about the origin.c. Determine the magnitude of the resultant moment of forces F1 and F2 about segment OE. Point O is the origin and point E is at (+5,+5,–3).