A 10m- propped cantilever beam, that is, the support at one-end is roller and the other end is fixed. The bending strength or what we call the flexural strength is equivalent to 700 kN-m. Determine the permissible load based on flexural capacity. A) 56 kN-m B) 48 kN-m 45 kN-m (D) 42 kN-m E) None of the choices are correct

A 10m- propped cantilever beam, that is, the support at one-end is roller and the other end is fixed. The bending strength or what we call the flexural strength is equivalent to 700 kN-m. Determine the permissible load based on flexural capacity. A) 56 kN-m B) 48 kN-m 45 kN-m (D) 42 kN-m E) None of the choices are correct

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A 7-meter simple beam is loaded with a varying load that varies from 0 kN/m to 40 kN/m applied at 1 m and 4 meters from the left support respectively. Compute the 6Ab/L and 6Aa/L of the beam.
A 10m propped cantilever beam, that is, the support at one-end is roller and the other end is fixed. The bending strength or what we call the flexural strength is equivalent to 700 kN-m. Determine the permissible load based on flexural capacity.
A beam 281 mm wide and effective depth 511 mm carries a factored uniformly distributed load of 66 kN/m including its own weight, in addition to a concentrated factored load of 48 kN at midspan. It spans 5.06 m face to face of simple supports. It is reinforced with ρ = 0.67 ρbal for positive bending. Use f’c = 32 MPa and fy = 414 MPa. Calculate the D/C ratio in percentage (%) for the particular beam.
SITUATION 3. A vertical load of W is supported by the tripod shown.a. Which of the following is the most stressed leg(s)?b. If the capacity of each leg is 25 kn, what is the safe valueof W?c. Determine the axial force on leg AD if the maximum safevalue of W is applied.
A horizontal beam, simply supported at its ends, carries a load which varies uniformly from 15 kN/m at one end to 60 kN/m at the other. Estimate the central deflection if the span is 7 m, the section 450mm deep and the maximum bending stress 100MN/m2. E = 210GN/mZ.
A simply supported beam with a span length of 4.8 m is laterally supported atits ends and is subjected to a dead load = 8 kN/m (including the weight of thebeam) and live load = 10 kN/m. If Fy = 345 MPa, is a PIPE8SCH80adequate?
A square tied column 400 mm on each side is reinforced with 8 – 25 mm bars with fy = 275 MPa.Assuming fc’ = 22 MPa, determine the ultimate axial load capacity of this column.a. 2250 kN c. 2243 kNb. 2239 kN d. 2356 kN
A cantilever beam has a span span of 6 m carries a concentrated load of 60 kN at midspan. Determine the slopeat the free end. Use E = 200,000 MPa and I = 60,000,000 mm4.
I need correct answer only Wheels Loads of 5 kN, 15 kN, 20 kN and 15 kN are 1.5m, 2 m and 2,5 m apart from each other respectively. They are supposed to cross a bridge of span 15 m, what is the maximum positive shear force produced at 6 m form the left support of the span?
A rectangular beam with a width of 360 mm and total depth of 540 mm and reinforced with 4- 22 mm dia. bars with concrete cover to the center of the bar equal to 72.5 mm. It is loaded with a total dead load of 31.2 kN/m and a live load of 20.5 kN/m and has a simple span of 7 m. Use f'c = 30.5 MPa and fy = 411.7 MPa. Answer the following: (1) Compute the moment of inertia of a cracked transformed section, (2) Determine the instantaneous deflection of the beam, (3) Compute the total deflection after 6 months due to 20% sustained live load.
Given that a simple span beam has concentrated load of 50KN acting at midspan and that the allowable shear stress of the material is 1 48MPa determine the computed depth of the span of the beam is 4 m and the width is 100mm
CAN SOMEONE PLEASE HELP ME SOLVE THIS PROBLEM A 381-mm wide 571.5-mm effective-depth beam carries a uniform ultimate load of 148.86 kN/m. The beam is simply supported, and the clear distance between supports is 5.5 m. Using fc′ = 20,685 kPa and fy = 275,800 kPa, design web reinforcement in the form of vertical U stirrups for this beam.