A 440 V, 22.5-hp, 50 Hz, 3-phase, 4-pole, star-connected induction motor has the following impedances in ohms per phase referred to the stator circuit: R1 = 0.552 X, = 1.1050 Ra = 0.350 X2 = 0.4562 Xy = 27.10 The total rotational losses are 1105 W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 2.3% at the rated voltage and rated frequency, d) Electrical power, e) Output power, f) Efficiency.

A 440 V, 22.5-hp, 50 Hz, 3-phase, 4-pole, star-connected induction motor has the following impedances in ohms per phase referred to the stator circuit: R1 = 0.552 X, = 1.1050 Ra = 0.350 X2 = 0.4562 Xy = 27.10 The total rotational losses are 1105 W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 2.3% at the rated voltage and rated frequency, d) Electrical power, e) Output power, f) Efficiency.

Electricity for Refrigeration, Heating, and Air Conditioning (MindTap Course List)

10th Edition

ISBN:9781337399128

Author:Russell E. Smith

Publisher:Russell E. Smith

Chapter8: Basic Electric Motors

Section: Chapter Questions

Problem 28RQ: What are the advantages and disadvantages of using the following types of motors? shaded-pole...

See similar textbooks

Similar questions

Would a positive-rotating harmonic or a negative-rotating harmonic be more harmful to an induction motor? Explain your answer.
What are the advantages and disadvantages of using the following types of motors? shaded-pole motor PSC motor split-phase motor capacitor-start–capacitor-run motor
A 440 V, 22.5-hp, 50 Hz, 3-phase, 4-pole, star-connected induction motor has the following impedances in ohms per phase referred to the stator circuit: R1 = 0.552X, = 1.1050Ra = 0.350X2 = 0.4562 Xy = 27.10 The total rotational losses are 1105 W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 2.3% at the rated voltage and rated frequency, calculate:a) Speed,b) Stator current.c) Power factor,d) Electrical power,e) Output power,f) Efficiency.g The shaft torque of the motor at rated load
A 110-V, 50-Hz single phase induction motor (split -phase) has the following constants for the main and auxiliary windings: Main winding, Zm (1.2 +j 25) ohm and auxiliary winding, Z,= (12+j 5) ohm. Determine (i) total current and power factor currents at time of starting, and (ii) phase angle between the main winding current and starting winding current.
A 1100 V, 50 Hz, delta connected induction motor has a star connected slip ring rotor with a phase transformation ratio of 3,8. The rotor resistance and standstil leakage reactance are 0,012 ohm/phase and 0,25 ohm/phase respectively. Neglecting the stator impendance and magnetising current determine the rotor current at 4 % slip with slip rings shorted. A. 123 A B. 430,5 A C. 560 A D. 742,3 A
3-phase 3730W, 220V, 6-pole and 50 Hz induction motor operates at full load with a slip of 0.025. The sum of the rotational losses including friction + windage losses and other (stray load) losses is 5% of the output power. Find the induced (electromagnetic) moment at full load
A 3-phase, 6 pole, 440 V, 60 Hz, Y-connected induction motor has the following impedances per phase referred to the stator circuit: R1=0.43 Ω, R2=0.54 Ω, X1=1.263 Ω, X2=0.608 Ω, XM=43Ω The total rotational losses are 1100 W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 2 percent at the rated voltage and rated frequency, Find the motor speed, stator current, output power
A three-phase, two-pole, 35 hp, 480 V, 60 Hz, Y-connected induction motor has the following constants in ohms per phase referred to the stator: Rl = 0.322Ω R2 = 0.196 Ω X1 = 0.675Ω X2 = 0.510Ω Xm = 12.5Ω The total rotational losses are 1850 W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 3% at the rated voltage and rated frequency, determine the following: (a) The speed in rpm and in rad/s (b) The stator current (c) The power factor (d) The developed power and output power (e) The developed torque and output torque (f) The efficiency.
(b) A 415V, 50Hz, delta-connected, 4-pole, squirrel cage induction motor has a perphase equivalent circuit as shown in Figure Q4(b). The circuit parameter values (in Ω/phase) for the stator is as follows: R1 = 0.095 Ω ; R2 = 0.06 Ω; X1 = 0.68 Ω ; X2 = 0.67 Ω; Xm = 18 Ω The motor is running at 1400 rpm at full-load. The core loss of the motor is assumed to be zero. The total friction and windage losses is 600 W, independent of load. Determine the efficiency of the motor.
A single-phase, 120 V, 60 Hz, four-pole, split-phase induction motor has the following standstill impedances:Main winding: Zm =5+j6.25Auxiliary winding: Za =8+j6a) Determine the value of capacitance to be added in series with the auxiliary winding to obtainmaximum starting torque.b) Compare the starting torques and starting current with and without the added capacitance in theauxiliary winding circuit when operated from a 120V, 60Hz supply
A four-pole, single-phase, 120 V, 60 Hz induction motor gave the following standstill impedances when tested at rated frequency:Main winding : Zm =1.5+j4 ohmsAuxiliary winding : Za =3+j6 ohmsa) Determine the value of external resistance to be inserted in series with the auxiliary winding to obtain maximum starting torque as a resistor split-phase motor.b) Determine the value of the capacitor to be inserted in series with the auxiliary winding to obtain maximum starting torque as a capacitor-start motor.c) Determine the value of the capacitor to be inserted in series with the auxiliary winding to obtain maximum starting torque per ampere of the starting current as a capacitor-start motor.d) Compare the starting torques and starting currents in parts (a), (b), and (c) expressed as per unit of the starting torque without any external element in the auxiliary circuit, when operated at 120V, 60Hz.
1.Show that if three phase currents, each of equal magnitude and differing in phase by 120degree, flow in a three phase winding that are 120 degree apart from each other then it willproduce a rotating magnetic field of a fixed magnitude. 2. A three phase, 5-hp, 60Hz, 115V, 4-pole induction motor is operating at rated voltage, rated frequency, and 125 percent rated load has an efficiency of 85.4 percent. The stator conductor loss, rotor copper loss and core loss are 223.2W, 153W, and 114.8W respectively.Sketch the power flow diagram, enter the given data, and determine i) shaft speed ii) shaft torque 3. Can single phase induction motor be self-started? Explain the operation of a split phase single phase induction motor?