A beam AB with a total length of 3m is supported by vertical rods at the ends, and it supports a downward load at C of P=60kN, as shown in the figure. The diameters of the steel hanger rods are d1=30 mm and d23D25 mm. Neglect the weight of the beam AB and the rods. At what distance x from A must the load be placed such that 01 = 02. And what is the corresponding axial stress in the rods? 3 m 3 m (1) P= 60 kN (2) 2 m VC B "Rigid":

A beam AB with a total length of 3m is supported by vertical rods at the ends, and it supports a downward load at C of P=60kN, as shown in the figure. The diameters of the steel hanger rods are d1=30 mm and d23D25 mm. Neglect the weight of the beam AB and the rods. At what distance x from A must the load be placed such that 01 = 02. And what is the corresponding axial stress in the rods? 3 m 3 m (1) P= 60 kN (2) 2 m VC B "Rigid":

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Consider a 155-mm-long segment of a simply supported beam. The internal bending moments on the left and right sides of the segment are 75 kN-m and 79 kN-m, respectively. The cross-sectional dimensions of the flanged shape are shown in the accompanying figure. Assume b1 = 135 mm, b2= 50 mm, b3= 205 mm, d1= 65 mm, d2= 180 mm, dz= 65 mm. Determine the maximum horizontal shear stress in this segment of the beam.
As shown in Figure Q3, a beam ABC is fixed at A and roller supported at C. The beam is used to support a uniform load, w = 5 kN/m along span AB and a couple, MB = 2 kN.m at B. c) Derive the slope and deflection equations for the beam
Consider a 180-mm-long segment of a simply supported beam. The internal bending moments on the left and right sides of the segment are 60 kN-m and 63 kN-m, respectively. The cross-sectional dimensions of the flanged shape are shown in the accompanying figure. Assume b1 = 170 mm, b2 = 50 mm, b3 = 285 mm, d1 = 70 mm, d2 = 230 mm, d3 = 70 mm. Determine the maximum horizontal shear stress in this segment of the beam.
Figure 1a shows a simply supported beam, AB of length L = 5.6 m, with a uniform distributed load of w = 4.5 kN/m. The shear force diagram is shown below the beam and the cross-section in Figure 1b. The cross section has a constant thickness t = 8.7 mm, the width of the flange is b = 217.5 mm and height of the web is d = 211.41 mm. 1. Determine the position of the neutral axis. 2. Determine the moment of inertia about the neutral axis
calculate the Axial Force in kips on member BC if the given 30kip and 20kip loads from the figure are both replaced by 42kips and 45kips respectively. Express your answer in 2 decimal places. Include (-) negative sign if the axial force is compression.
As shown in the figure, aluminum rod AB and steel rod BC, hinged to rigid supports, are pinned together at B to carry a vertical load P = 6000 lb. If aluminum rod has a cross-sectional area of 0.60 in.² and E = 10 × 103and steel rod has 0.50 in.² and E = 29 × 106 each rod and the horizontal and vertical displacements of point B. Assume α = 60° and θ = 30°. ksi, psi, compute the elongation of
T (Shear force) and M (Bending) for the system whose loading condition is given in Figure 1.Draw the moment diagrams. Calculate the deflection (vertical displacement) at point B in mm using Castigliano's Theorem. The beam bending stiffness (EI) is constant along the bar and its value is 50 000 kNm2. q=1,4(kN/m) a=8(m) El=50000(kNm2)
A downward load of Q = 33 kN is applied to rigid bar ABD as shown in the sketch. Axial member CDE is subjected to a downward load of P = 27 kN at joint E plus a force at joint D from the rigid bar. The axial member has an elastic modulus of E = 69 GPa and a cross-sectional area of A1 = A2 = 145 mm2. Assume that a = 390 mm, b = 220 mm, c = 630 mm, and d = 490 mm. Determine the vertical displacement of joint E. Draw a free body diagram of rigid bar ABD, and determine the magnitude of the vertical reaction force at pin D.Answer:D = kN
Q9c. For the beam below, the point loads and distances are as follows: F1 = 11. 25 kN, F2 = 11.25 kN and F3 = 4.50 kN L1 = 2.25 m, L2 = 4.50 m, L3 = 4.50 m and L4 = 2.25 m Determine the bending moment at D. Give your answer in kilonewton metres (kNm) to two decimal places.
In the figure, determine the value of S such that the resultant is 100 N downward and acting at 3 meter from the support.
what is the value of moment MD when x = 13 m due to a unit load? Use four decimal places.
A part of slab is given in the figure. The slab is supported by secondary beams AB, CD and EF which are placed with a 50cm spacing. The secondary beams transfer the load they carry to the main beams.In the figure, AE and FB are the visible part of the main beams. Finally, main beams are supported by the columns at both ends. The slab is under uniformly distributed load q=4.5 kN/m2. The span length L is 3,5 m. Determine the dimendions of rectengular cross-sections of timber beams CD and the main beam which has a length of 4 m.