A beam is loaded with a uniformly distributed load between the two roller supports and a single load at the overhang.It also has two internal hinges - one midway between the fixed support and the first roller support and the othermidway between the two roller supports. Refer to the figure below for the magnitude of the loadings and dimensions.a) Draw the FBD of the beam and determine if the beam is statically determinate or indeterminate.75 kN/m100 KN12.5 m12.5 m7.5 m 7.5 m10 mb) If the beam is statically determinate, analyse it using the equilibrium equations. If the beam is staticallyindeterminate, analyse it using structural indeterminate methodologies such as setting up and solving the equationsof equilibrium, equations of compatibility, and force-displacement relations.1. Draw the FBD for each element of the beam and determine the axial forces, shear forces, and bendingmoments for each element.2. Once all forces and moments are calculated, draw the FBD of the whole beam with the calculated forces andmoments.3. Draw the shear force diagram for the beam. Ensure that you show all your calculations for the diagram,including the location of zero shear (uniformly distributed load).4. Draw the bending moment diagram for the beam. Ensure that you show all your calculations for the diagram.

Given:- To find:- 1. FBD and degree of determinacy 2. Shear forces and Bending Moment for each…

A beam is loaded with a uniformly distributed load between the two roller supports and a single load at the overhang. It also has two internal hinges - one midway between the fixed support and the first roller support and the other midway between the two roller supports. Refer to the figure below for the magnitude of the loadings and dimensions. a) Draw the FBD of the beam and determine if the beam is statically determinate or indeterminate.

A beam is loaded with a uniformly distributed load between the two roller supports and a single load at the overhang. It also has two internal hinges - one midway between the fixed support and the first roller support and the other midway between the two roller supports. Refer to the figure below for the magnitude of the loadings and dimensions. a) Draw the FBD of the beam and determine if the beam is statically determinate or indeterminate.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A cantilever beam, 3.5 m long, carries a concentratedload, P, at mid-lengthGiven:P = 200 kNE = 200 GPaI = 60.8 x 10^6 mm^4 How much is the deflection (mm)at mid-length What force (kN) should be applied at the free end to preventdeflection? To limit the deflection at mid-length to 9.5 mm, how much force(kN) should be applied at the free end?
A reinforced concrete beam has a width of 425mm and an effectivedepth of 900mm. The longitudinal bars at compression side are 4-25mm dia. and 2layers of 4-32mm dia. at tension side. Concrete strength f’c=27.60 MPa and fy=420.4) Calculate the Transformed moment of Inertia.5) Calculate the moment capacity of the section.6) Calculate for the safest uniform load that can carry by the beam if ihas a lengthof 10m.
A 6-m simple beam is carrying a uniform load of 25 kN/m over the entire beam with two-point loads 15 kN at 1.5 m from both ends. If E = 200 Gpa and I = 0.000332 m4 , determine the following using Moment Area by Parts: a.) Midspan deflection b.) Deflection at 1.5 m from the left reaction.
The section of an I beam is made out of two identical flanges and a web. The width of Flange is 260mm and thickness 25mm. Web thickness is 10mm and the total depth of the section is 715 mm. fy=300mPa, ZX=5760X103 mm3 and SX=6390X103mm3. Determine the moment section capacity of the section
A 6-m simply supported reinforced concrete rectangular beam is 250 mm wide. The total depth is 400 mm and its effective depth is 340 mm. It is reinforced for tension only with 4-28mm diameter bars. It carries a total dead load of 21.6 kN/m including its weight. Fy = 350 MPa and f’c = 20.7 MPa. 1. Compute the distance of the neutral axis from the top most fiber. a. 195.98 mm b. 230.56 mm c. 186.01 mm d. 218.84 mm 2. Which of the following gives the ultimate moment capacity of the beam? a. 202.09 kN.m b. 181.88 kN.m c. 171.4 kN.m d. 186.2 kN.m 3. Which of the following most nearly gives the unfactored uniform live load capacity using the load combination 1.2D+1.6L? a. 40.42 kN/m b. 15.38 kN/m c. 9.06 kN/m d. 3.84 kN/m
A 2m long cantilever is carrying a load of 20 kN at the end and 30 kN at a distance of 1 m from the free end. Find the slope and deflection at the free end. Take E = 200 GN/m2 and I = 150 x 10-6 m4
The cantilever beam consists of a rectangular structural steel tube shape [E = 205 GPa; I = 90 × 106 mm4]. For the loading shown, determine the beam deflection at point B.Assume wAB = 45 kN/m, wBC = 25 kN/m, P = 30 kN, Q = 40 kN, LAB = 2.1 m, LBC = 3.1 m.
• b1 = 300 mm • b2 = 180 mm . d1 = 250 mm • d2 = 350 mm • f'c = 28 MPa •fy=414 MPa • eccentricity = 500 mm Determine the nominal axial load in kN if it is applied at an eccentricity of 200 mm.
A horizontal beam, simply supported at its ends, carries a load which varies uniformly from 15 kN/m at one end to 60 kN/m at the other. Estimate the central deflection if the span is 7 m, the section 450mm deep and the maximum bending stress 100MN/m2. E = 210GN/mZ.
A 7-m simple beam is carrying a uniform load of 25 kN/m over the entire beam with two-point loads of15 kN at 1.5 m from both ends. If E = 200 Gpa and I = 0.000332 m4 , determine the following using the Double Integration Method:a.) Midspan deflectionb.) Deflection at 1.5 m from the left reaction. Show FBD
The 450N plate is attached to collars which may slide on the vertical rod. If the coefficient of static friction is 0.4 between both collars and the rod determine the maximum supporting force available from friction when F = 200N; a = 2.75m , b = 4.5m , c = 2m Show solution, the answer is 168.75
a 5m simple beam ABC carries a uniform load of 78kN/m. point A is the left end hinge support, point B is the midpoint and point C is the right end roller support. tge devation of point A when a tangent line is drawn at C is ta/c ___/EI? use area moment method.