A building with inductive loads has the average consumption of 40kW and 26kVAR. At the are location of the building, the electric utility applies a surcharge/additional payment (in %) based on the power factor of the load. A table has been used to determine the surcharge (shown in a separate photo). With the building supplied by a 230 Vrms source, solve for the following: a. The average current (in A rms) drawn by the building. b. Effective impedance of the building c. Surcharge or additional payment (in %) imposed on the building.

A building with inductive loads has the average consumption of 40kW and 26kVAR. At the are location of the building, the electric utility applies a surcharge/additional payment (in %) based on the power factor of the load. A table has been used to determine the surcharge (shown in a separate photo). With the building supplied by a 230 Vrms source, solve for the following: a. The average current (in A rms) drawn by the building. b. Effective impedance of the building c. Surcharge or additional payment (in %) imposed on the building.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.18P: Let a series RLC network be connected to a source voltage V, drawing a current I. (a) In terms of...

See similar textbooks

Similar questions

Derive the formula for Average Power, Pavg = VI cosθ watts, where V is the root-mean-square (rms) voltage in volts, I is the root-mean-square (rms) current in ampere, and cosθ is the power factor. For the derivation, use the sinusoidal voltage and current equations. The angle between the voltge and current is angle θ
Find the Is Vs and Vr1 RMS values?
A building, supplied by a 230 Vrms source and with inductive loads, has an average consumption of 40kW and 26kVAR. Find the following: - Power factor of the load- By installing a capacitor in parallel with the building, what is the minimum kVAR needed to make the power factor within the range of 90%-100%
what is the mutual inductance in ohms (or the mutual inductive reactance ) between the two mutually-coupled inductors? if circuit to the left of load Z is converted into its Thevenin's equivalent, what would be the magnitude of ZTh in ohms? what is the phase angle of ZTh in degrees? what would be the phase angle of VTh in degrees? what would be the magnitude of VTh in volts if E = 120 V?
A building supplied by a 230 Vrms source has inductive loads that have an average consumption of 40kW and 26kVAR. What is the average current drawn in by the building and its effective impedance?
The rms value of the sinusoidal voltage supplied to the convenienceoutlet of a home in the United States is 120 V. What is the maximumvalue of the voltage at the outlet?
If the load is connected across a 400 Vrms source, determine the real and reactive power consumed by the load.
A dc voltage equal to Vdc V is applied to a resistor of R Ω. Asinusoidal voltage equal to vs V is also applied to a resistor of R Ω.Show that the dc voltage will deliver the same amount of energy in Tseconds (where T is the period of the sinusoidal voltage) as thesinusoidal voltage provided Vdc equals the rms value of vs. (Hint:Equate the two expressions for the energy delivered to the resistor.)
A 600-kg machine is mounted on a rigid floor of a factory through a spring of stiffness 1,500,000 N/m and a dashpot with unknown damping coefficient. The machine produces a constant harmonic force of 500 N. When the machine operates at 100 rad/s, its steadystate displacement amplitude is observed to be 0.0001 m. (a) Determine the damping coefficient of the dashpot, and compute the phase angle between the force and displacement at 100 rad/s. (b) Compute the values of the system’s undamped natural frequency, critical damping coefficient and damping ratio (c) Determine the velocity and acceleration amplitudes of the machine at 100 rad/s. (d) Evaluate the percentage change of the steady-state displacement amplitude and phase of the machine if the frequency is now increased to 150 rad/s.
Write the relationship between λ and power demand when the cost curve is given
Using the measured values, write the equation of the voltage across 12Voutput voltage terminals as a function of time.
In the circuit given on the side Ra=Rb=Rc=Basic frequency of 13 Ohm loadsit is powered by an AC voltage of f= 60 Hz. Power derived from the sourceits value was measured as Pk=9372.12 Watts. Each switchingthe element is triggered in such a way that it will be at 180 degrees.The DC bus voltage (E=?) and the effective value of the ic phase current(ic rms=?) calculate.