A catchment area which is having a slope of 2.8% and a clay loam soil has four gauging stations. The distance of GS1 to GS4 is 450km, GS1 to GS2 is 242km, GS2 to GS3 is 235km, GS3 to GS4 is 486km, GS1 to GS3 is 750km, and GS4 to GS2 is 741km. The rainfall depths recorded per year in GS1. GS2, GS3, and GS4 are 245mm, 215mm, 178mm, and 150mm and the corresponding polygon areas of each gauging station is 50,845 hec, 480km2, 750km2, and 640km2. respectively. Determine the gross irrigation requirement in m if the crop factor on the area is 0.495 and the pan evaporation is 201mm, the konveyance efficiency is 34%

A catchment area which is having a slope of 2.8% and a clay loam soil has four gauging stations. The distance of GS1 to GS4 is 450km, GS1 to GS2 is 242km, GS2 to GS3 is 235km, GS3 to GS4 is 486km, GS1 to GS3 is 750km, and GS4 to GS2 is 741km. The rainfall depths recorded per year in GS1. GS2, GS3, and GS4 are 245mm, 215mm, 178mm, and 150mm and the corresponding polygon areas of each gauging station is 50,845 hec, 480km2, 750km2, and 640km2. respectively. Determine the gross irrigation requirement in m if the crop factor on the area is 0.495 and the pan evaporation is 201mm, the konveyance efficiency is 34%

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Water fl ows in a brickwork rectangular channel 2 m wide,on a slope of 5 m/km. (a) Find the fl ow rate when thenormal depth is 50 cm. (b) If the normal depth remains50 cm, fi nd the channel width which will triple the fl owrate. Comment on this result.
A hydraulic jump occurs in a 5 meter wide rectangular channel carrying 6 m^3/s on an unkown slope. The depth after the jump is 1.4 m 1. If the length of the jump is 5 meter, determine the slope of the energy gradeline. ( answer should be in 3 decimal places)
The cumulative volumes at St.Km’s 0+150 and 0+180 are 2025 and 1875 m3respectively. If at the latter St.Km., Lcut = 10 m and average fill area is twice the average cut area, find these average areas.
Upstream zones as well as downstream zones should be studied for stability. Describe what are effect of water on these zones?
Compute the volume of fill per unit length for an earthdam 9.0m high , assuming a top width of 2.4m , sideslope of 3:1 upstream and 2:1 downstream , and a levelbase perpendicular to the center line of the dam? step by step with explanation
Consider a farm irrigation ditch in a loam soil having the following dimensions: Bottom width, 0.5 meters. Total depth, 0.60 meters. Side slopes of 1 horizontal to 1 vertical. Depth of water, 0.40 meters. Cross-sectional area of the stream, 0.36 m2 Wetted perimeter, 1.631 m Hydraulic radius of the stream, 0.22 m QUESTION: If the bottom of the ditch described in the previous problem (Problem 1) has a uniform slope of 1 meter per kilometer, and if the bottom and sides are kept smooth and free from weeds, what will be the mean velocity of flow and the discharge? Use n = 0.02.
An open channel having a slope of 0.0063 Is to carry 10 m3 /s. The channel material has an n value of 0.036. For a most efficient section of a triangular section Compute the hydraulic mean depth in m. Round your answer to 3 decimal places.
What is the resulting Froude Number for a rectangular channel ( b = 1.82 m., d = 2.17 m.) carrying water with a weight flow rate of 48.311 kN/s?
An earthen channel in good condition carries a discharge of 10.0 cumecs with a m velocity of 0.7 m/s. determine the bed slope. Assume the bottom width as twice the depth. T Bazin's coefficient as 1:30 and side slope as (1.5/1)/(H ^ V) and B = 2y n
Awide rectangular movable bed channel laid at a slope of 0.001,is made up of sediments of 6mm dia. The Specific gravity of the sediments is 2.65. Perform the following tasks.Compute the Incipient depth assuming the non-dimensionalized Shear Reynolds number (variable plotted along X-axis of the Shields curve) to be greater than 400. Hence compute the maximum discharge that can be carried in the channel with no sediment movement.
The coefficient of permeability below a dam is 4m/day. The water on the upstream side is 20m higher than on the downstream side. To estimate the seepage below the dam, a flownet was graphically drawn such that the number of potential drops Nd=10 and number of flow channels Nf=4. The base of the dam is founded 1m below the ground. Between the heel and the toe of the dam, a distance of 30m, there are 8 potential drops. Evaluate the seepage flow per meter width of the dam in liters per minute. Determine the uplift pressure at the heel of the dam in kPa. Determine the uplift pressure at the toe of the dam in kPa.
A hydraulic jump occurs in a 5m wide rectangular channel carrying 6m³/s on an unknown slope. The depth after the jump is 1.4 m. If the length of the jump is 5m, determine the slope of the energy gradeline