A centrifugal fan is delivering 2000 cfm of air at a total pressure differential of 2 in.w. The fan has an outlet area of 0.85 ft and requires 1.25 hp shaft input power. The fan speed is 1000 rpm. If the fan motor efficiency 85%, calculate: a) The total fan output power (hp) b) The fan total efficiency c) The fan static pressure, in.w

A centrifugal fan is delivering 2000 cfm of air at a total pressure differential of 2 in.w. The fan has an outlet area of 0.85 ft and requires 1.25 hp shaft input power. The fan speed is 1000 rpm. If the fan motor efficiency 85%, calculate: a) The total fan output power (hp) b) The fan total efficiency c) The fan static pressure, in.w

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter2: Matter And Energy

Section: Chapter Questions

Problem 21RQ

See similar textbooks

Similar questions

The mechanical efficiency and static pressure of fan are 44.3% and 20 m of air respectively. What is the static efficiency if the total pressure created by fan is 25 m of air?
Completely solve and box the final answers. Write legibly 4. A single stage air compressor handles 30 cubic meter per minute of atmospheric pressure, 30°C air and delivers it to a receiver at 3.0 mpa. Its volumetric efficiency is 83.0%, compression efficiency of 83.0% and mechanical efficiency of 80.30%. If it rotates at 300 rpm, what power in kW is required to drive it?
The farmer wanted to know the number of hills per hectare in his rice production, if row is 15 cm apart and the hills is 15 cm apart.
In an undisturbed airstream inside a wind tunnel, the pressure is 101325 Pa, density is 1.225 kg/m^3 and velocity is 200 m/s. What is the velocity if the pressure is 90,000 Pa.
Find the net work.
solve. heat transfer
The following data are given for a biogas digester suitable for the output of six cows. The volume of digester is 8.3 m3 , the volume of gas holder is 2.2 m3 and the retention time is 22 days. Find the height of gas holder in centimeter.
Create 10 Descriptive Research Topics for each. 1. Energy System 2. Automation Systems 3. Agricultural Mechanization 4. Laboratory Equipment
Given the lifting table shown below , The diameter of the plunger DP 8 cm.The ram diameter DR 48 cm , The efficiency is 100 %, The stroke of the plunger is 18 cm. The ram has to raise a load F2 = 2 kN. Find : a) the force F1 exerted on the plunger b) the number of strokes needed to raise the load given above by a distance of 10 cm c) the volume of oil pumped if the load moves by 20 cm ( using plunger force in a ) d) What will be the new diameter of the ram piston if the new load force is 16 times the force exerted in the plunger the diameter of the plunger is kept to 8cm .
Given the sketch below, the diameter of the plunger Dp = 8 cm, the ram diameter is Dr = 48 cm. The efficiency is 100%, the stroke of the plunger is 18 cm. The ram has to raise a load F2 = 2 kN. Find: D) The new diameter of the ram piston if the new load force is 16 times the force exerted in the plunger, the diameter of the plunger is kept to 8 cm.
The capital cost of a hydro-power station of 50 MW capacity is Rs 1,000 per kW. The annual depreciation charges are 10% of the capital cost. A royalty of Re 1 per kW per year and Re 0·01 per kWh generated is to be paid for using the river water for generation of power. The maximum demand on the power station is 40 MW and annual load factor is 60%. Annual cost of salaries, maintenance charges etc. is Rs 7, 00,000. If 20% of this expense is also chargeable as fixed charges, calculate the generation cost in two part form.
I just need help with the equation. - A person, not in the system, drags a heavy box across a level floor. What is the energy conservation equation?