A cylindrical tank with depth h and radius 1.72m is being filled with water by Pipes 1 and 3. An outlet is provided by Pipe 2 to deliver water to the housing compound. The velocity in pipe 1 is 34kph and the flow in Pipe 3 is 31 L/s. If the exit velocity in Pipe 2 is 25 kph, how fast does the water level change in mm/s? D1 = 85mm and D2 = 40mm 03 D = mm m Water

A cylindrical tank with depth h and radius 1.72m is being filled with water by Pipes 1 and 3. An outlet is provided by Pipe 2 to deliver water to the housing compound. The velocity in pipe 1 is 34kph and the flow in Pipe 3 is 31 L/s. If the exit velocity in Pipe 2 is 25 kph, how fast does the water level change in mm/s? D1 = 85mm and D2 = 40mm 03 D = mm m Water

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

water from a reservoir flows at 0.85 m3/s through a rigid pipe 1200 mm diameter and completely stopped by a closure of a valve almost instantly. Bulk modulus of water is 2.20 x 109 N/m2. a) Find the water hammer pressure for sudden closure. b) Find the discharge if water hammer pressure is 700 KPa. c) If the time of closure of valve is 4 sec. and located at 650 mm from the reservoir, find the water hammer pressure at flow rate at 0.85 m3/s.
An open tank 1.82m square contains 1m of water. It is translated horizontally to the right at an acceleration of 3m/s2. a) How high should the tank be such that no water will be spilled? b) If the acceleration is now 5m/s2 and the height of the vessel is the answer in (a), how much water will be spilled? c) If the vessel is initially closed at the top and accelerated to the right at 5m/s2, what will be the hydrostatic force acting on the left side of the vessel?
A rectangular flume 8.5m wide, with a roughness n = 0.018, leading from a reservoir in which the water surface is maintained constant at a height of 1.85m above the bed of the flume at entrance as shown in the figure. The flume is on a slope of 0.00254. the depth 275m downstream from the head end of the flume is 1.35m. Assuming an entrance loss of 0.15 times the velocity head, find the flow rate for the given condition.
Calculate the diameter of vertical pipe needed for flow of liquid at R = 1800 when the pressure remains constant. v = 1.5 um?/s.
An orifice at the bottom of a rectangular tank has a cross-sectional area of 0.004m². The tank has a cross-section of 3m x 2m. a. If it takes 2078 sec. to empty the tank if it contains water at a depth of 5.6m, find the coefficient of discharge. b. Compute the time to lower the water surface from 5.6m to 3m using C = 0.62.
Water flows in a wide channel at Fr=4.5 and y1 = 2.40 m. If the flow undergoes a hydraulic jump, calculate: y2
Two reservoirs are connected by a pipeline consisting of pipe 1, pipe 2, pipe 3connected in series with length of 170 m, 300 m, 210 m respectively. Thedifferent in water surface levels in two reservoirs is 12 m. The friction coefficientfor pipe 1, pipe 2 and pipe 3 are 0.0052, 0.005 and 0.0048 respectively. Based onTable 2 and the setting given, determine the flowrate of the flow if the entranceloss coefficient is 0.25 considering :(i) minor losses; and(ii) neglecting minor losses pipe 1 =230(mm) Pipe 2 =330(mm) Pipe 3 = 430(mm)
Q2. A 1.5 m-wide sluice gate with an opening of 10 cm is discharging water at a rate of 3 m/s. Calculate the flow discharge of the flow if the flow depth behind the sluice gate is 3 m and the downstream flow depth is 2 m. Coefficient of discharge Cd = 0.585.
2 - When the pitot tube is moved vertically inside the pipeline, why does it yield different flow velocities? Explain
If the water surface elevation in reservoir B is 110 m, what must be the water surface elevation in reservoir A if a flow of 0.03 m3s is to occur in the cast-iron pipe? Use f = 0.021 for all pipes. Draw the HGL and the EGL, including changes in slope due to head loss. Neglect minor losses.
An open rectangular tank measuring 6m long, 2.05 m wide, and 3 m high is filled to a depth of 1.9 m with gasoline (SG=0.68). The tank is attached to a truck that is traveling horizontally at 9.81. How much water (m³) is left if the track is traveling horizontally at 9.81 m/s^2
Determine the head loss in the "smooth" pipe in meters if its friction factor is 0.014. a.12.9517 b.39.5136 c.30.4889 d.99.9358 What gage pressure p1 in kPa, is needed to provide the given flow rate? a.1692 kPa b.1121 kPa c.1328 kPa d.1725 kPa