A designer wants a comparison of Class B and Class C Concrete Mixture for the proposed rectangular parallelepiped footing with dimensions MM x MM x D.D they are all measured in meters. What would be the number of bags of cement, total volume of sand and gravel that will be used. per class also, select the economical proportion. Use the proportion method. write the corresponding proportion

A designer wants a comparison of Class B and Class C Concrete Mixture for the proposed rectangular parallelepiped footing with dimensions MM x MM x D.D they are all measured in meters. What would be the number of bags of cement, total volume of sand and gravel that will be used. per class also, select the economical proportion. Use the proportion method. write the corresponding proportion

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A footing requires 4 bags of cement. if the water-cement ratio is 0.45, determine the amount of water(liters) that shall be used in the mixture. use 40kg/bag of cement.
A septic tank is to be constructed to serve for a family of 8 persons. The size of a septic tankis 2300 mm x 1500 mm x 1500mm. Determine the following;a. volume excavated. b. for concreting, compute the cement, sand and gravel (using class A)i. top and bottom slab,ii. footing 6pcs- 0.60mx0.60m x 20cm andiii. column 6pcs- 20cmx20cm
Show your solution and diagram. Design a square spread footing to support an edge column 460mm x 460mm in dimension. The allowable soil pressure is 478.5 KPa, unit weight of soil is 20.4 KN/m³, unit weight of concrete is 23.5 KN/m³, fć = 21 MPa, fy = 414 MPa, 75mm clear cover and 25mm diameter rebars both ways.
A footing requires 8 bags of cement. If the water-cement ratio is 0.53, how many water (liters) shall be used in the mixture? Use 40kg/bag of cement.
Based on the figure below, solve for the following items: a. Total Volume of Concrete of Footing (considering the wastage) in cubic meters. b. No. of cement bags, the volume of sand (cubic meter), and gravel (cubic meter) for footing using Class B. c. Total Volume of Concrete of Column/Pier (considering the wastage) in cubic meters. d. No. of cement bags, the volume of sand (cubic meter) and gravel (cubic meter) for column/pier using Class A. Column - 0.40 x 0.40 meter Height of Column - 1.60 meters Footing - 2 x 2 meters Thickness of Footing - 0.40 meter Show your solutions.
Problem Solving You are to design the concrete mix proportion for concrete foundations (single footing) in a residential project in Pampanga, with a required 28-day design strength of 5000 psi. Maximum aggregate size to be used is ¾ inch, and the allowed slump is 3- 4 inches. Use conversion factor 1 yd = 3 ft. Required: Determine the mixture proportions of water, cement, coarse aggregate, and fine aggregate in terms of Ib/yd?, as well as air content in %. Express final answers in two decimal places.
A rectangular footing 2.3 m x 3.6 m x 0.38 m thick supports a 300 mm square column at its center. Column loads are service conditions: DL= 306 kN LL = 241 kN Li Pc = 21 MPa fy = 415 MPa Concrete cover to the centroid of steel reinforcement = 100 mm Calculate the nominal punching shear stress in the slab. Write your final answer with 2 decimal places if the unit is MPA
a rectangular footing 2.3 m x 3.3 m x 0.31 m thick supports a 300 mm square column at its center. column loads are service conditions:DL = 385 kN LL = 292 kN f'c = 21 MPa fy = 415 MPa Concrete cover to the centroid of steel reinforcement = 100 mm calculate the nominal punching shear stress in the slab. write your final answer with 2 decimal places if the unit is MPA.
Estimate the TOTAL quantity of cement, sand and gravel needed for 12 pieces of the typical concrete columns and footings. Use Class B concrete mix for columns and Class A concrete mix for footings. Details: Dimension of Footing: 0.85m x 0.85m Thickness of Footing: 0.35m Dimension of Column: 0.375m x 0.375m Total height of the structure including the footing: 4m What is the total volume of the footing?
1. A concrete column 4.00 m with a cross-sectional dimension of 20 cm x 25 cm is resting on a concrete footing 20 cm thick x 80 cm square. If class "B" concrete is specified, find the quantity of cement, sand, gravel, and water if there are 12 columns of the same size. Use 40 kg / bag cement. Water-cement ratio is 50%.
You are to design the concrete mix proportion for concrete foundations (single footing) in a residential project in Pampanga, with a required 28-day design strength of 5000 psi. Maximum aggregate size to be used is ¾ inch, and the allowed slump is 3-4 inches. Use conversion factor 1 yd = 3 ft. Determine the mixture proportions of water, cement, coarse aggregate, and fine aggregate in terms of Ib/y^3, as well as air content in %. Express final answers in two decimal places. Cement: Type I, Specific Gravity (SSD) = 3.15 Gravel: Bulk Specific Gravity (SSD) = 2.59, Dry Rodded unit weight = 105.4 lb/ft^3. Absorption Capacity 0.89%, Surface Moisture 0.00 % River Sand: Bulk Specific Gravity (SD) = 2.61, Absorption Capacity 2.30%, Surface Moisture 0.00%. Fineness Modulus = 2.70 Refer to the Table of Values in the pictures
Given the image, a.) determine the number of bags of cement required to construct the wall footing using class A. b.) A 7m will be constructed, determine the total bags of cement required if the wall is 4.2m high and the CHB used are 5". Use class C mixture.