A drilling machine is driven by a single-phase induction machine connected to a 110 V RMS supply. Assuming that the machining operation requires 1 kW, that the tool machine has 90 percent efficiency, and that the supply current is 14 A RMS with a power factor of 0.8. Find the AC machine efficiency.

A drilling machine is driven by a single-phase induction machine connected to a 110 V RMS supply. Assuming that the machining operation requires 1 kW, that the tool machine has 90 percent efficiency, and that the supply current is 14 A RMS with a power factor of 0.8. Find the AC machine efficiency.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.21P: An industrial plant consisting primarily of induction motor loads absorbs 500 kW at 0.6 power factor...

See similar textbooks

Related questions

Q: A three phase 6000 V alternator has the following O.C.C. at normal speed: Field current : 14 18 23…

Q: In a 3-phase, 6-pole induction motor, The power crossing the air gap of a 60 Hz is 42.6 kW, and the…

A: An AC motor is an electrical machine which takes AC electrical input energy and produces mechanical…

Q: A factory load consists of the following: input power of Induction motor is 40000 W at 0.76 power…

A: As we have given : P1=40000 Wcos ϕ1=0.76P2=24000 Wcos ϕ2=0.81P3=10 kWcos ϕ3=1

Q: (c) If your system was a l170 W blender motor with a 120 V (60 Hz) supply and a power factor of 0.6…

A: The solution is given below

Q: A small industrial plant operates with an average load of 400 kW, consisting of small induction…

A: First we will find total active power from the source. Total reactive power from supply = sum of…

Q: Assume that a feeder supplier an industrial consumer with a cumulative load of: (i) induction motors…

A: The Feeder System is the foundation of a safe and innovative power distribution system capable of…

Q: A 25 MVA turbo-alternator is working on full load at a power factor of 0.8 and efficiency of 97%.…

A: Given data: The rating of the turbo-alternator is 25 MVA For the turbo-alternator is cosϕ=0.8 The…

Q: A certain six-pole 440-V-rms 60-Hz three-phase delta-connected induction motor has Rs=0.08 ΩRr′=0.06…

A: Synchronous speed is given as,

Q: Prob.2. Two identical 2000 kVA alternators operate in parallel. The governor of first machine is…

A: Using droop characteristics of two generators calculate loading on the two generators. The machine…

Q: A 25 MVA turbo-alternator is working on full load at a power factor of 0·8 and efficiency of 97%.…

Q: Explain binary cycle power plant (using figure). Compare its performance as compared to other…

A: The binary cycle power plant details are shown below; Binary cycle power plant is a form of…

Q: How many poles are required on an alternator which runs at 300 rpm to develop

Q: A 3-Phase 50 kW, 4-pole, 50 Hz induction motor has a winding (ac) designed for delta connection. The…

Q: A 220-V-rms (line-to-line), 60-Hz, three-phase induction motor operates at 3500 rpm while delivering…

A: From problem description we have: Vin = 220 V rms Iin = 8 A rms Nfull load = 3500 rpm f = 60Hz Pout…

Q: A 440-V-rms (line-to-line voltage) three-phase induction motor runs at 1150 rpm driving a load…

A: The given values are ,VL = 440 vN = 1150 rpmT = 15 Nmpf = 0.8iL = 3.4 AThe expression of o/p…

Q: 5. A 25 MVA turbo-alternator is working on full load at a power factor of 0-8 and efficiency of 97%.…

Q: 1. The power factor of a squirrel cage induction motor istewat light load only. fr - 2. The eddy…

A: Note: Since you have not specified any question to be answered, as per our honor code, we are…

Q: Assume that a three-phase 500 hp 60 Hz 4160 V wye-connected induction motor has a full- load…

Q: (. What will be the air gap power (in watts) developed by a 3-phase induction motor, whose ratings…

A: It is given that: Terminal Voltage=Vt=230 (line voltage)Vt(phase)=Vt3=2303=132.79 VOutput…

Q: Assume that a three-phase 500 hp 60 Hz 4160 V wye-connected induction motor has a full- load…

A: First calculate active power and reactive power input to motor. Capacitor supplies only reactive…

Q: A 50 kW induction motor is operated at a lagging power factor of 0.8, the source voltage being 230 V…

A: An ideal capacitor will not consume any active power. It will consume only reactive power. To supply…

Q: Determine the internal generated voltage of shunt dc motor, giving: Ra=0.7 ohm, Rf=190 ohm, Vt=440v,…

A: Shunt DC motorRa = 0.7ΩRf = 190ΩVt = 440VPout = 7.46KWEfficiency = 85%Ea = internal generated…

Q: A 220Vrms, 1 ½ hp, 10, 60-Hz induction motor draws 7.6A when operating at rated conditions. The…

A: In this question, We need to determine the power factor of the induction motor and value of…

Q: An alternator has an armature resistance of 0.3 and leakage reactance of 1.220. The alternator…

A: In this question we need to find a terminal voltage and generate emf of alternator.

Q: Q1:If the power factor of an induction motor is measured at 0.8±5%. Calculate the limiting error and…

A: Measurement- It is process to comparison between standard and unknown and the magnitude of resulting…

Q: Two, 3phase alternators connected in parallel are driven by a hydraulic turbine whose speed- load…

A: Given Two three phase alternators connected in parallel are driven by hydraulic turbineThe…

Q: Referring to the formula below, what is the synchronous speed of an AC motor that has 60 Hz applied…

A: 1. f=60Hz P=2

Q: Example1.Two 220-V, d.c. generators, each having linear external characteristics, operate in…

Q: b) For the following applications which type of DC motors do you select? Explain the reason. i)…

A: (b) According to the type of application dc motors are selected. For: (i) Electric train: DC series…

Q: A three-phase induction motor is rated at 5 hp, 1760 rpm, with a line-to-line voltage of 220 V rms.…

A: Given data: Pout=5 hp=5×746=3730 Wη=75% The expression for the input power absorbed is given as,…

Q: lon motor is operated at a lagging power factor of 0.8, the source voltage being 230 V rms. a) Find…

A: 50kW induction motor Power factor 0.8 Source voltage 230V Find the complex power Capacity of…

Q: In a 3-phase induction motor, express the mechanical power developed, in terms of air gap power Pg.

A: Given, To express the mechanical power developed in induction motor in terms of air gap power Pg.

Q: The inertia constant of a 100 MAV, 50Hz. 4-pole alternator is 10MJ / MVA. It is delivering half…

A: Solution: Sunchronous speed in rad/sec.ωs=4πfP=4π×504ωs=50π mech-rad/sec. Rated So=100 MVAInertia…

Q: A 25 MVA turbo-alternator is working on full load at a power factor of 0-8 and efficiency of 97%.…

A: Given Data, Turbo alternator VA rating = 25 MVA Power Factor = 0.8 η = 97% Inlet air temperature =…

Q: National Power Corporation has A 3-phase, Wye -connected turbo-alternator, having a synchronous…

A: The solution is given below

Q: 4) A 40-kW induction motor, with a lagging power factor of 0.76 is supplied by a 120-Vrms, 60-Hz…

Q: a) b) The value of excitation current required for full load current at 0.7 pf lagging…

A: Synchronous generator converts mechanical energy to electrical energy. The OCC curve is drawn…

Q: Calculate the shaft torque for an 8 pole, three-phase AC induction motor with 20 hp, 220 V, if, at a…

Q: a. A three-phase, 50 Hz, four-pole star-connected induction motor is supplied by a three- phase AC…

Q: A DC motor in derivation has an armor resistance of 0.2 Q and a field resistance of 50 Q. A 100 V…

A: Based on the given data, the circuit arrangement will be as…

Q: A 50 kW induction motor is operated at a lagging power factor of 0.8, he source voltage being 230 V…

A: The solution to all subparts can be achieved as follows.

Q: A 50 kW induction motor is operated at a lagging power factor of 0.8, the source voltage being 230 V…

A: The explanation is as follows.

Q: The output of 2200 Volts three phase induction motor used in a factory is 800 HP. If the average…

Q: A 25 MVA turbo-alternator is working on full load at a power factor of 0-8 and efficiency of 97%.…

Q: A 25 MVA turbo-alternator is working on full load at a power factor of 0·8 and efficiency of 97%.…

A: Part (1) Given data S = 25 MVA pf = 0.8 efficiency = 97% loss by internally circulating air =90…

Q: Which of the following statement is corect for the causes of low power factor O The power factor of…

A: Low power factor is mainly because of inductive loads.

Q: In a 3-phase, 4-pole induction motor, The power crossing the air gap of a 60 Hz is 42.6 kW, and the…

A: In this question we will find load torque of given motor...

Q: A DC motor has an equivalent circuit shown below. The motor is driving a load, and it draws an…

A: The solution can be achieved as follows.

Q: A 25 MVA turbo-alternator is working on full load at a power factor of 0-8 and efficiency of 97%.…

A: The solution can be achieved as follows.

Concept explainers

Synchronous Motor

The synchronous motor is an AC electric type motor where at a steady-state the shaft rotation is synchronized with the supply current variable-frequency. To an integral number of AC cycles, the rotation period is exactly equal. The stator of the motor in the synchronous motor contains multi-phase AC electromagnets due to which a magnetic field is created that rotates in time with the oscillation of the line current. The rotor contains a permanent magnet and the rotor rotates in synchronization with the stator field at the same rate and provides the second synchronized magnetic field which is rotating in nature as a result. When the synchronous motor is supplied with independently excited multi-phase AC electromagnets on both the rotor and the stator, it is termed as a doubly-fed machine. The most widely used AC-type motors are the synchronous AC motor and the induction AC motors.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A drilling machine is driven by a single-phaseinduction machine connected to a 110-V rms supply.Assume that the machining operation requires 1 kW,that the tool machine has 90 percent efficiency, andthat the supply current is 14 A rms with a power factorof 0.8. Find the AC machine efficiency.
A 25 MVA turbo-alternator is working on full load at a power factor of 0.8 and efficiency of97%. Find the quantity of cooling air required per minute at full load, assuming that 90% ofthe total losses are dissipated by the internally circulating air. The inlet air temperature is20° C and the temperature rise is 30° C. Given that specific heat of air is 0.24 and that 1 kg ofair occupies 0.8 m3.
A 2-pole, single-phase alternator driven at 3000rpm require a mechanical input to its rotor of 30kW when it is delivering its full-load output of 30kW. Under this condition the fixed and variable losses are1100W and 2.8kW respectively, and the rotor field winding is supplied from a 110V dc source. Given that the full-load efficiency is 87%, determine. the frequency generated, the input driving torque on full-load and the rotor field current
A three-phase induction motor is rated at 5 hp, 1760 rpm, with a line-to-line voltage of 220 V rms. The motor has a power factor of 80 percent lagging and an efficiency of 75 percent under full-load conditions. Find the electrical input power absorbed by the motor under full-load conditions. Also, find the rms line current.
A 25 MVA turbo-alternator is working on full load at a power factor of 0·8 and efficiency of 97%. Find the quantity of cooling air required per minute at full load, assuming that 90% of the total losses are dissipated by the internally circulating air. The inlet air temperature is 20o C and the temperature rise is 33 30o C. Given that specific heat of air is 0·24 and that 1 kg of air occupies 0·8 m .
A Step-Down Transformer. A transformer connected to a 120 V (rms) ac line is to supply 12.0 V (rms) to a portable electronic device. The load resistance in the secondary is 5.00 Ω. (a) What should the ratio of primary to secondary turns of the transformer be? (b) What rms current must the secondary supply? (c) What average power is delivered to the load? (d) What resistance connected directly across the 120 V line would draw the same power as the transformer? Show that this is equal to 5.00 Ω times the square of the ratio of primary to secondary turns.
Discuss the various methods and technologies used for power factor correction in industrial power systems. How does power factor correction improve the efficiency of electrical systems?
A 25 MVA turbo - alternator is working on full load at a power factor of 0-8 and efficiency of 97%. Find the quantity of cooling air required per minute at full load, assuming that 90% of the total losses are dissipated by the internally circulating air. The inlet air temperature is 20 ° C and the temperature rise is 30 ° C. Given that specific heat of air is 0-24 and that 1 kg of air occupies 0-8 m3. (890 m3 / minute
Explain the concept of power factor correction and its significance in industrial power systems.
Discuss the Power transmission from home to powerplants and provide a picture
A single-phase alternator connected to 6,600-V bus-bars has a synchronous impedance of 10Ω and a resistance of 1 Ω. If its excitation is such that on open circuit the p.d. would be 5000 V, calculate the maximum load the machine can supply to the external circuit before dropping out of step and the corresponding armature current and p.f. [2864 kW, 787 A, 0.551]
The inertia constant of a 100 MAV, 50Hz. 4-pole alternator is 10MJ / MVA. It is delivering half rated Volt-Amps at 0.5 pf (lag). If the machanical input to the machine suddenly raised to 75 MW, the rotor acceleration will be equal to the (Neglect the losses).