A floor sheathing is supported by 100 mm x 250 mm woodenjoists spaced at 600 mm on centers with an effective span of4.00 meters.The total floor load transmitted to the joist is6.00 kPa. Using the weight of Joist as 6.50 KN/m³. and themodulus of elasticity E = 12000 MPa.Compute the actual bending stress, shear stress and deflection ofthe floor joist.Floor SheathingFloor JoistJoist

Answered: Image /qna-images/answer/d4c5cbbc-0a70-4a33-8e0c-8bbddd423132.jpg

A floor sheathing is supported by 100 mm x 250 mm wooden joists spaced at 600 mm on centers with an effective span of The total floor load transmitted to the joist is Using the weight of Joist as 6.50 KN/m². and the modulus of elasticity E = 12000 MPa. Compute the actual bending stress, shear stress and deflection of the floor joist. Floor Sheathing 4.00 meters. 6.00 kPa. Floor Joist Joist Spacing loist Spacing

A floor sheathing is supported by 100 mm x 250 mm wooden joists spaced at 600 mm on centers with an effective span of The total floor load transmitted to the joist is Using the weight of Joist as 6.50 KN/m². and the modulus of elasticity E = 12000 MPa. Compute the actual bending stress, shear stress and deflection of the floor joist. Floor Sheathing 4.00 meters. 6.00 kPa. Floor Joist Joist Spacing loist Spacing

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A circular log of 156mm diameter carries a 26KN load at midspan over a 3m simple span . If the modulus of elasticity of wood is 7310MPa, calculate the maximum shearing stress of the beam in MPa? express your answer in 2 decimal places
NEED HELP ASAP!! A floor system in a small building consists of wood planks supported by 2 in. (nominal width) joists spaced at distance s, measured from center to center (see the figure). The span length L of each joist is 10.5 ft, the spacing s of the joists is 15 in., and the allowable bending stress in the wood is 1,350 psi. The uniform floor load is 90 lb/ft^2, which includes an allowance for the weight of the floor system itself. (a) Calculate the required section modulus S for the joists. (b) Select a suitable joist size (surfaced lumber) from Appendix G, assuming that each joist may be represented as a simple beam carrying a uniform load. A. 2x4 in.^ B. 2x6 C. 2x8 D. 2x10 E. 2x12 Select a suitable joist size (c) What is the maximum floor load that can be applied to your final beam selection in part (a)?
Compute the spacing between joists with a bending stress of 12 MPa. Floor joists size: w = 75 mm by h = 200 mm and it is simply supported with a span of 5 m. Carry a floor loaded at 5 KN/m2. What safe floor load could be carried on a center-line spacing of 0.60 m.?
2. A timber column, 200 mm x 200 mm in cross section, is reinforced on each side by a steel plate 200 mm and t mm thick. Determine the thickness t so that the column will support an axial load of 1350 kN without exceeding a maximum timber stress of 8.30 MPa or a maximum steel stress of 137.90 MPa. The moduli of elasticity are 10.34 GPa for timber and 200 GPa for steel.
A 150 mm x 250 mm timber beam is subjected to a maximum moment of 28 kN-m. What is themaximum bending stress? a. 15.72 MPa c. 24.23 MPab. 17.92 MPa d. 18.97 MPa
A floor is supported by 75mm x 200mm wooden joists spaced @ 400 mm on centers with an effective span of 3m. The total floor load transmitted to the joist is 5 Kpa. Weight of wood 6.3 KN/m3. Ew = 12x 10^3MPa. a. Determine the maximum flexural stress of the beam.b. Determine the maximum shearing stress of the beam.c. Determine the maximum deflection of the beam.
The floor of a classroom is to be supported by the bar joists shown. Each joist is 15 ft long and they are spaced 2.5 ft on centers. The floor itself is to be made from lightweight concrete that is 4 in. thick. Neglect the weight of the joists and the corrugated metal deck, and determine the load that acts along each joist.
A floor opening in a building is to be closed by pouring a concrete slab. The proposed framing is composed ofwood joist assumed to be simply supported and given with a total load of 4 kPa. What is the maximum flexural stress in 40 mm x 190 mm wood joist if its span is 3 m and spaced atevery 0.30 m on centers?a. 5.61 MPa c. 6.78 MPab. 7.23 MPa d. 4.65 MPa What is the maximum shearing stress in the said joists?a. 0.40 MPa c. 0.36 MPab. 0.69 MPa d. 0.54 MPa
A floor slab 100 mm thick is cast monolithically with beams 300 mm wide 500 mm deep spaced 2 m on centers, on simple supports over a span of 6.0 m. The floor supports a superimposed service dead load of 1.77 kPa and service live load of 4.8 kPa. Using f’c = 21 MPa, long bar fy = 415 MPa, calculate: Using a T-beam geometry, determine the required amount of flexure bars for maximum ultimate bending. = [As] sq.mm (whole number)
Calculate the total equivalent uniform load in KN/m on Beam BE, if the total floor load is 17.45KPa. Use a=3.5m, b=5m . Express your answer in 2 decimal places.
Determine the largest weight W (in lb) that can be supported safely by the structure shown in the figure. The working stresses are 15313 psi for the steel cable AB and 856 psi for the wood strut BC. Neglect the weight of the structure. Round off the final answer to two decimal places.
A square timber column, 10 in. by 10 in. in cross section, is reinforced on all four sides by copper plates, each plate being 10 in wide and “t” in thick. Determine the smallest value of “t” for which the column can support an axial load of 560 kips if the working stresses are 1250 psi for timber and 17 ksi for copper. The moduli of elasticity are 1.5 × 10^6 psi for timber and 17 × 10^6 psi for copper.