A fully-enclosed warehouse is used as a storage facility for flour and other baking products in a Manufacturing Plant in Laguna. The warehouse has a dimension of 23m roof span, and 60m long length. The roof apex is 11 meters high while the lowest point of the roof is 9m high. The following parameters were obtained for the area: Wind Speed - 260kph Gust-effect factor -0.85 GCpi = +-0.18 Draw the warehouse section and show the values of the Windward, Leeward and roof pressure in kPa (evaluate both in + and -value of GCpi)

A fully-enclosed warehouse is used as a storage facility for flour and other baking products in a Manufacturing Plant in Laguna. The warehouse has a dimension of 23m roof span, and 60m long length. The roof apex is 11 meters high while the lowest point of the roof is 9m high. The following parameters were obtained for the area: Wind Speed - 260kph Gust-effect factor -0.85 GCpi = +-0.18 Draw the warehouse section and show the values of the Windward, Leeward and roof pressure in kPa (evaluate both in + and -value of GCpi)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

PLEASE HELP WITH DETAILED SOLUTION USING NSCP 2015 A reinforced concrete beam having a width of 350mm has a total depth of 675mm. It is reinforced for tension having a steel area of 3162.5 sq.mm. and steel area for compression equal to 750 sq.mm. The centroid compression bars is placed at a distance of 62.5mm from the top of the beam while the centroid of the tension bars is placed 75mm from the bottom of the beam. Asuume d=dt, fc’=27.6MPa and fy = 414.6MPa. Determine the ultimate moment capacity of the beam
Given is the 200mm X 400 mm rectangular beam below. 9 kN 7.50 kN/m 400 mm 1.50 kNm A C 1.50m 7.50m 200 mm R1 R2 Figure 1 Compute the flerural stress developed irhMPa at a distance 1.50m from the left end in a fiber 180 mm from the top of the beam?
A 30m building has an average height of 3.0m each floor, has a weight of 3,000 KN for each floors and 2,500 KN for the Rooftop. The building use to carry hazardous facilities with the following design parameters. Z = 0.4 Ca= 0.44Na I= 1.25 Cy = 0.96Nv Na= 1.0 R= 8.5 Nv = 1.2 Ct= 0.0731 determine the design shear. determine the shear at the 5th floor. determine the moment at the base.
Given is the 200mm X 400 mm rectangular beam below. 9 kN 7.50 kN/m 400 mm 1.50 kNm A C 200 mm 1.50m 7.50m R2 R1 Figure 1 What is the value of the maximum flerural in MPa?
EARTHQUAKE ENGINEERING PROBLEM: A seventeen-story hospital, with a total height of 60 m is to be constructed somewhere in Makati, 10 km from the Valley Fault System. The material that will be used is that of steel. What should be the applied base shear, V if the total weight of the building W=12,500kN. USE NSCP 2015 FOR REFERENCE.
A 200mm by 300mm prestressed concrete beam having a span of 6m is subjected to a prestressing of 200mmkn. determine the deflection of the beam. Figure Below
Mechanics of Deformable Bodies problem: A reinforced concrete column, 200mm in diameter is designed to carry an acial compressive load pf 320kN. Determine the required cross-sectional area of the reinforing stell if the allowance stresses are 6MPa for concrete and 120 MPa for steel. Use Eco=14 GPa and Est=200Gpa
1. Minimum design dead load for a 6mm floor fill (sand). a 0.015 kPa b. 0.023 kPaC. 0.0017 kPa D. 00.90 kPa2.The performance characteristics commonly of interest in the design of structures are the following except:a. Stresses B. Deflectionsc. Support Reactions d. Loading Condition 3. These structures are composed of straight members connected at their ends by hinged connections to form a stable configurationa.Rigid Frames b. Beams c. TrussesD. Slabs4. It is the portion of the slab area whose load is carried by a particular member.a. One-way systemb. Two-way system C.Tributary width d. Tributary area5. These are the actions of other bodies on the structure under consideration.a. Internal Forces b. External Forces C.Support Reactions d. Couple Moment
10.1 A simply supported beam carrying floor joist shown in Figure 7.9 (Module 7, page 109) is made of rectangular wood having a dimension of 50mm x 100mm. Compute the maximum deflection if Ě = 8.47 x 10°MPa (for guijo, stress grade 80, NSCP, 2015) Where P = 1kN P P P P P P A B. 1.0m 1.0m 4.0m Figure 7.9
An eight Storey city library is proposed to be constructed in Baguio. The structure shall be a reinforced concrete building (no shear walls). The weight per floor (including 1st floor) is estimated to be 1800 KN. The roof deck weighs 1700 KN. Solve for the Base Shear, V, for the condition above using the following formulas: 1. V =ZICKSW (SEAOC CODE 1974 - 4 TH Revision) Adopted by National Structural Code of the Philippines, 3rd edition (NSCP 1987) 2. V = ZICW/Rw National Structural Code of the Philippines, 4th edition (NSCP 1992), Volume I 3. Most critical formula for V as indicated in Sec. 208.5.2 of the NSCP Vol.1 5th edition (2001). 4. Most critical formula for V as indicated in the NSCP Vol.1 6th edition (2015). 1700 KN 100 KN 32 1800 KN La Tide Toeang Warg 32 1800 KN 32 259 32 1800 KN 32 1800 KN City Cam Cena, Nagun C Bengt Nearet Active failt Trace t Fae tunao Fa Segnet Nane Tut Fat Vear Maper 2012 Ma t et 10 00 32 1800 KN 3.5 20 Floor height: 1st floor 3.5m and the rest of the…
Our University wants to construct a signal post near the entrance, for which they are in need of a horizontal structural element with one end fixed and other end is free. That is to be made up of flexible composite material. The maximum allowable load at free end is 900 kN. The length of the horizontal structural element is 2.2 m. The cross section of the beam is a hollow circular section. Outer diameter 200 mm with wall thickness of 20 mm. Find the deflection at the free end and maximum slope in beam by neglecting self-weight of the diving board. Take Young's Modulus as 170 GPa.
3. The precast floor beam is made from concrete having a specific weight of 23.6 kN/m³. If it is to be used for a floor in an office of an office building, calculate its dead and live loadings per meter length of beam. 150 mm 600 mm -450 mm- -1350 mm- 150 mm 450 mm-