now please A half-wave dipole antenna is excited by a sinusoidally varying current with an amplitude Io = 2 A at 1 GHz.(a) Determine the time average power radiated by the dipole.(b) Determine the pattern solid angle 2p.(c) If the half-wave dipole is connected to a 50 N transmission line, and considering the antenna has a radiation resistance (Rrad) of 73 N andradiation efficiency (E) of 1, determine the standing wave ratio (S) on the line.Answer :(а) Ргad %3D 146W(b) Np = 8.377%3Dsr.(c) S =

We need to find out power and solid angle and standing wave ratio for given antenna

A half-wave dipole antenna is excited by a sinusoidally varying current with an amplitude Io = 2 A at 1 GH z. (a) Determine the time average power radiated by the dipole. (b) Determine the pattern solid angle Np. (c) If the half-wave dipole is connected to a 50 SN transmission line, and considering the antenna has a radiation resistance (Rrad) of 73 N and radiation efficiency (E) of 1, determine the standing wave ratio (S) on the line. Answer : (a) Prad = 146 W (b) Sp 8.377 sr. (c) S =

A half-wave dipole antenna is excited by a sinusoidally varying current with an amplitude Io = 2 A at 1 GH z. (a) Determine the time average power radiated by the dipole. (b) Determine the pattern solid angle Np. (c) If the half-wave dipole is connected to a 50 SN transmission line, and considering the antenna has a radiation resistance (Rrad) of 73 N and radiation efficiency (E) of 1, determine the standing wave ratio (S) on the line. Answer : (a) Prad = 146 W (b) Sp 8.377 sr. (c) S =

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Design a Dolph-Tschebyscheff broadside array of 8 elements, 25-dB sidelobe level, and with a spacing of λ/2 between the elements to operate at 3 GHz. Choose a “rectangular patch” or a "dipole" antenna as the array element that operates at 3 GHz. For the final antenna design, determine the: • Half-power beamwidth (in degrees). How much narrower or wider (in degrees) is thishalf-power beamwidth compared to that of a uniform array of the same number ofelements and spacing?• How much smaller or larger (in dB) is the gain (in dB) compared to that of a uniformarray of the same number of elements and spacing? Justify you answer. Do you expectit? Why?
An antenna array achieves beam steering in a direction of 30° from the normal propagation direction. If the distance between the array elements (the inter-element distance) is 7.5 cm and the phase shift between the EM waves at adjacent elements is pi/2 radians, what is the frequency of the EM waves being transmitted? Assume the attatched value in calculation.
With neat diagram design the 5 element Yagi-Uda antenna for the receiving 100MHz radio signal showing design steps. Consider effective dipole length equal to 0.48 λc and spacing between elements is 0.15λc.
A halfwave dipole with a total conductor length of 1 m is used as a transmit antenna to radiate electromagnetic energy. At a distance of 500 m from this antenna in the direction of maximum radiation, what is the free space path loss (dB)? Consider the end effect of the dipole.
Calculate the radiation resistance of a lambda/10 wire dipole in free space.
Please show all steps A parabolic dish antenna has a diameter of 5 meter, operating at 30 GHz frequency.a) What is the effective area Ae of the antenna? b) What is the antenna power gain in ratio and in dBi?
For a dipole antenna, the radiation resistance is given as 523 ohms. What will be the effective length of the dipole? Express with respect to the wavelength.
A 0.48520λ0 dipole antenna is made to work at 4 GHz. The antenna is then connected to a 12 V voltage source which has an internal resistance of 25 Ω) a) Make a diagram of the above system, b) Is an impedance matching circuit needed? If yes, where should the impedance circuit be inserted and make a diagram of the system with the adjusting circuit, c) How many cm is the length of the dipole antenna above, d) How much power is emitted when not using the adjusting circuit and e) How much power is emitted when using the adjusting circuit. Solve subparts D,E max 20 minutes ASAP
Estimate the diameter of a paraboloidal reflector antenna required to produce null beamwidth of 10o at 3 GHz.
For a monopole antenna with linearclinear distribution, if the effective length of the monopole is equal to half of wavelength, then estimate the radiation resistance of the monopole.
"If a receiving antenna has a gain of 26 dB, calculate its effective capture area (m^2) if its operating at 1.7 GHz. Enter only the numerical value. No need for the unit. Use four decimal places (if the answer is not an integer)."
A centre fed linear dipole antenna, three and half wavelength long, has a feed current of 15 A RMS. Calculate the rms electric field at seven wavelength away from the antenna.