A laser beam of 0.02 W with photon energy of 1.6 eV is incident on a GaAs PIN phot-detector. The detectori-region width is 6 um, its cross sectional area is A = 0.8 cm?, and its absorption coefficient at the incidentphoton energy is aGaAs =1 x 10 cm1. If 20\% of the incident photon flux is reflected back at the detectorsurface, calculate the detector photo-current I:%3DSelect one:O A. IL = 0.00361 AOB. IL = 0.00520 A%3DO C. IL 3.20e-4 AO D. IL = 0.00920 AActivate WindowsCH-n00220 A

A laser beam of 0.02 W with photon energy of 1.6 eV is incident on a GaAs PIN phot-detector. The detector i-region width is 6 pum, its cross sectional area is A=0.8 cm2, and its absorption coefficient at the incident photon energy is aGaAs =1 x 10° cm. If 20\% of the incident photon flux is reflected back at the detector surface, calculate the detector photo-current I: %3D Select one: O A. IL = 0.00361 A %3D O B. IL = 0.00520 A C. IL = 3.20e-4 A O D. IL = 0.00920 A Activate Windows %3D

A laser beam of 0.02 W with photon energy of 1.6 eV is incident on a GaAs PIN phot-detector. The detector i-region width is 6 pum, its cross sectional area is A=0.8 cm2, and its absorption coefficient at the incident photon energy is aGaAs =1 x 10° cm. If 20\% of the incident photon flux is reflected back at the detector surface, calculate the detector photo-current I: %3D Select one: O A. IL = 0.00361 A %3D O B. IL = 0.00520 A C. IL = 3.20e-4 A O D. IL = 0.00920 A Activate Windows %3D

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Consider an AlGaAs based hetero-structure laser diode having a cavity length of 150μm. The peak emission wavelength is 850 nm when the refractive index of the crystal is 3.7. a) Determine the mode integer and the wavelength separation between the modes? b) If the optical gain vs wavelength characteristic has a full width half maximum width of 6 nm, how many modes will be there in the given bandwidth? c) If the optical cavity of the laser is formed with cleaved reflectivity of each cleaved laser facet is 45 % and the loss is 10 cm-1 . Calculate the minimum required gain for lasing.
Estimate the optical loss due to Fresnel reflection at a fiber core from GaAs each of refractive indices 1.5 and 3.6 respectively. Calculate the optical power coupled into a step index fiber of 60 µm core diameter with a numerical aperture of 0.3 from a GaAs surface emitting LED with an emission diameter of 90 µm and a radiance of 50 W sr1cm-2. Determine the overall power conversion efficiency for the LED if it is operating with a drive current of 100 mA and a forward voltage of 1.6V.Find the optical output power and 3 dB optical modulation bandwidth for the LED if the device emits 400 µW of optical power into air when modulated at a frequency of 150 MHz with the minority carrier recombination lifetime of 7 ns.
We have such fiber with length of 4 km and couple light from a single mode laser with center wavelength of 1337.4 nm with FWHM linewidth of 8.7 nm. Please calculate the pulse broadening (in ps) due to material dispersion!
Q.2] Explain the detection process in the p–n photodiode. Compare this device with the p–i–n photodiode. Q.3] a) Define the quantum efficiency and the responsivity of a photodetector. b) Derive an expression for the responsivity of an intrinsic photodetector in terms of the quantum efficiency of the device and the wavelength of the incident radiation. c) Determine the wavelength at which the quantum efficiency and the responsivity are equal
Consider an instrument that transmits radio waves at different frequencies vertically into the ionosphere and measures the time it takes them to return. Using this technique, one can indirectly measure the electron density as a function of height. Assume a ground-based transmitter emits a vertical signal that sweeps over a range of 1 to 15 MHz. If the peak electron density in the ionosphere is 2×106 electrons/cm3, what range of frequencies will be reflected back to the instrument on the ground? Neglect any absorption effects. Frequencies from _____ MHz to ____ MHz will be reflected back. Report answers to 3 significant digits.
Researchers had to develop semiconductor lasers that emitted at wavelengths in the 1.3 to 1.6 µm range. Use Eq. 1 of the paper to plot n(l) over the wavelength range of 0.5 to 2.5 µm for all of the glass samples listed.
What maximum frequency of a medium is needed to obtain a capacity of 16 Mbps using 256 signal components?
Find the numerical aperture 'O' of a 1.5m plastic optical fiber, if the distance from tip to surface is 6cm and the light radius is Acm?
Determine the maximum spacing allowed for an equally-spaced linear array such that, for a beam scan up to 20 from broadside, there will be no grating lobes in the visible region
1) This MCQ QUESTION FROM ANTENNA ENGINEERING course.
A parallel-plate waveguide has plate separation d = 1 cm and is filled with Teflon having dielectric constant εr = 2.1. Determine the maximum operating frequency such that only the TEM mode will propagate. Also find the range of frequencies over which the TE1 and TM1 (m = 1) modes, and no higher-order modes, will propagate.
A michelson inferometer is adjusted to give a fringe pattern of concentric circles when illuminated by an extended source of light of wavelength 500nm. How far must the movable arm be displaced for 1000 fringes to emerge from the centre of the bulls eye?