A layered soil deposit is of dimension 3m x 2m x 3m. There are three different soils, each of 1 m thick as shown. The coefficient of permeability of these soil layered are shown in figure. The water is flowing in the z-direction under the head loss of 5.15 m. The quantity of flow (in m³/hr) would be. 1m 1m 1m 2m k₂ = 5 x 10 m/s k₂=2.5 x 10 m/s k₂ = 1.25 x 10³ m/s 3m

A layered soil deposit is of dimension 3m x 2m x 3m. There are three different soils, each of 1 m thick as shown. The coefficient of permeability of these soil layered are shown in figure. The water is flowing in the z-direction under the head loss of 5.15 m. The quantity of flow (in m³/hr) would be. 1m 1m 1m 2m k₂ = 5 x 10 m/s k₂=2.5 x 10 m/s k₂ = 1.25 x 10³ m/s 3m

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter7: Permeability

Section: Chapter Questions

Problem 7.3P

See similar textbooks

Similar questions

A 5.3 m thick of soil consist of three different layers as follows: Layer 1: H1 = 1.6 m, k1 = 4.5 m/day Layer 2: H2 = 2.3 m, k2 = 3.5 m/day Layer 3: H3 = 1.4 m, k3 = 5.1 m/day Considering the equivalent coefficient of permeability in the horizontal direction, what is the transmissivity of soil? CHOICES A. 28.43 m2/day B. 27.65 m2/day C. 20.45 m2/day D. 22.36 m2/day
44 A three-layer soil has the following properties: Layer 1: k = 2.66 x 10^-3 cm/s, H = 3.42 m. Layer 2: k = 1.77 x 10^-2 cm/s, H = 4.99 m. Layer 3: k = 3.47 x 10^-3 cm/s, H = 4.9 m. Determine the equivalent vertical coefficient of permeability of the soil arrangement. Layer 1 is on top of layer 2 while layer 2 is on top of layer 3. Round off to four decimal places.
Determine the average vertical permeability in mm/s of a soil mass made up of three horizontal strata, each 1 m thick, if the coefficients of permeability are 1 × 10^–1 mm/s, 3 × 10^-1 mm/s, and 8 × 10^–2 mm/s for the three layers.
Question 34 A three-layer soil has the following properties: Layer 1: k = 2.72 x 10^-3 cm/s, H = 3.02 m. Layer 2: k = 1.7 x 10^-2 cm/s, H = 4.93 m. Layer 3: k = 3.16 x 10^-3 cm/s, H = 4.04 m. Determine the equivalent vertical coefficient of permeability of the soil arrangement. Layer 1 is on top of layer 2 while layer 2 is on top of layer 3. Round off to four decimal places.
Solve it completely....Determine the average horizontal and vertical permeabilities of a soil mass made up of three horizontal strata, each 1 m thick, if the coefficients of permeability are 1 × 10–1 mm/s, 3 × 10–1 mm/s, and 8 × 10–2 mm/s for the three layers.
Determine the average horizontal and vertical permeabilities of a soil mass made up of three horizontal strata, each 1 m thick, if the coefficients of permeability are 1 × 10–1 mm/s, 3 × 10–1 mm/s, and 8 × 10–2 mm/s for the three layers.
2) A soil profile consisting of three layers is shown in the Figure. A) Calculate the values of σ, u and σ' at points A,B,C and D if Layer 1: H1=5m, e=0.7, Gs=2.69 Layer 2: H2=8m, e=0.55, Gs=2.7 Layer 3: H3=3m, w=38%, e=1.2 B) What is the change in effective stress at point C if: If the water table drops by 2m? If the water table rises to the surface up to point A? Water level rises 3 m above point A due to flooding?
A soil profi le consists of a clay layer underlain by a sandlayer, as shown in Figure P7.17. If a tube is inserted intothe bottom sand layer and the water level rises to 1 mabove the ground surface, determine the vertical effective stresses and porewater pressures at A, B, and C. IfKo is 0.5, determine the lateral effective and lateral totalstresses at A, B, and C. What is the value of the porewater pressure at A to cause the vertical effective stressthere to be zero?
The soil profile at a site consists of a 3-m thick sand layer (moist unit weight = 16.5 kN/m^3, saturated unit weight = 18.5 kN/m^3) underlain by a 6-m thick clay layer (w = 27%, Gs = 2.70, mv = 0.31 MPa^-1, Cv = 2.6 m^3/year), which is underlain by a gravel layer as shown in the figure. A 3 m compacted fill with a unit weight of 20 kN/m^3 is required to be placed at ground level.a) What would be the final consolidation settlement, in mm rounded to the first decimal place?b) How long will it take for 50 mm consolidation settlement, in months rounded to the first decimal place?c) What would be the consolidation settlement in one year, in mm rounded to nearest whole number?
A layered soil is shown in the figure below. Given that H1 = 1 m, k1 = 10-4 cm/sec H2 = 1 m, k2 = 2.8 x 10-2 cm/sec H3 = 2 m, k3 = 3.5 x 10-5 cm/sec Estimate the ratio of equivalent permeability, kH(eq)/kV(eq).
A layer soil has the following data: H1=3m K1=2x10^-2 cm/sH2=4m K2=3.2x10^-2 cm/sH3=6m K3=4.1x10^-2 cm/s a) Compute the equivalent coefficient of permeability in the vertical directionb) Compute the velocity of flow if h =4 m.
A three-layer soil has the following properties: Layer 1: k = 2.79 x 10^-3 cm/s, H = 3.12 m. Layer 2: k = 1.92 x 10^-2 cm/s, H = 4.45 m. Layer 3: k = 3.4 x 10^-3 cm/s, H = 4.11 m. Determine the equivalent vertical coefficient of permeability of the soil arrangement. Layer 1 is on top of layer 2 while layer 2 is on top of layer 3.