A loaded scow has a draft of 1.8 m in fresh water, when upright. The scow is 6 m wide, 12 m and 2.4 m high. The center of gravity of the scow is 1.8 m above the bottom along the vertical axis of symmetry. (a) determine the initial metacentric height (b) What is the maximum single weight that can be moved transversely from the center of the unloaded scow over the side without sinking the scow. (c) If the maximum weight obtained in (6) is doubled, at what distance from the center will the scow be on the verge of submergence.

A loaded scow has a draft of 1.8 m in fresh water, when upright. The scow is 6 m wide, 12 m and 2.4 m high. The center of gravity of the scow is 1.8 m above the bottom along the vertical axis of symmetry. (a) determine the initial metacentric height (b) What is the maximum single weight that can be moved transversely from the center of the unloaded scow over the side without sinking the scow. (c) If the maximum weight obtained in (6) is doubled, at what distance from the center will the scow be on the verge of submergence.

Name: A loaded scow has a draft of 1.8 m in fresh water, when upright. The s
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A loaded scow has a draft of 1.8 m in fresh water, when upright. The scow is 6 m wide, 12 m and 2.4 m high. The center of gravity of the scow is 1.8 m above the bottom along the vertical axis of symmetry.(a) determine the initial metacentric height(b

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.100P: The cylindrical water tank with R = 10 ft and H = 1.6 ft has thin steel walls of uniform thickness...

See similar textbooks

Similar questions

The cylindrical water tank with R = 10 ft and H = 1.6 ft has thin steel walls of uniform thickness and weighs 18000 lb when empty. Determine the depth of the water h for which the center of gravity G of the tank plus water will be located at the surface of the water. For water, use =62.4lb/ft3.
The automobile, with center of gravity at G, is parked on an 18 slope with its brakes off. Determine the height h of the smallest curb that will prevent the automobile from rolling down the plane.
Show that every axis passing through the centroid of the equilateral triangle is a principal axis.
Use numerical integration to locate the centroid of the symmetric plane
A loaded scow has draft of 1.6 m in sea water (sg = 1.03) when in upright position. The scow is 6 m wide and 12 m long and 2.4 m high. The center of gravity of the scow is 1.8 m above the bottom along the vertical axis of symmetry. Assume that the center of buoyancy is located half of the height of draft. a. Determine the initial metacentric height, considering upright position. b. What is the maximum single weight in kN that can be moved transversely from the center of the unloaded scow over the top edge without sinking the scow? (Considering rolling position) c. Determine the metacentric height due to pitching if the scow is tilted until one end is just submerged in seawater.
Derive the relation for metacentric height of a floating body.
A loaded scow has a draft of 1.8 m in fresh water when erect. The scow is 6 m wide and 12 m long and 2.4 m high. The center of gravity of scow is 1.8 m above the bottom along the vertical axis of symmetry. What is the maximum single weight that can be moved transversely from the center of the scow and unloaded over the side without sinking the scow?
A crane barge, 20 m long, 8 meters wide, and 12 meters high loaded at its center with a road roller weighing 20 short tons, floats on fresh water with a draft of 1.20 meters and has its center of gravity located along its vertical axis at a point 1.50 meters above its bottom. Compute the horizontal distance out to one side from the centerline of the barge through which the crane could swing the 20-ton load which it had lifted from the center of the deck, and tip the barge with 20-meter edge just touching the water surface.
The rectangular panel, which is 4 m wide, 3 m high block the end of a 3 m deep water channel. The is suspended around a horizontal axis along its upper edge through point B and is prevented from opening by a fixed edge at point C. Determine the force which is exterted on the panel by the ridge as shown in fig.(2).
A dam with triangular cross section holds back a body of water. The dam has height h. The dam is made of concrete, which has speci…c gravity 3.1. What is the maximum angle, , for which thedam will not tip over about point O?
A long solid cylinder of radius 0.8 m hinged at point A is used as an automatic gate, When the water level reaches 5 m, the gate opens by turning about the hinge at point A. Determine (a) the hydrostatic force acting on the cylinder and its line of action when the gate opens and (b) the weight of the cylinder per m length of the cylinder.
A rectangular pontoon has a mass of 240 metric tons and a total length of 18 m. The centre of gravity is 0.3 m above the centre of cross-section and metacentric height is to be 1.2 m when the angle of heel 10 degree. The freeboard must not be less than 0.6 m when the pontoon is vertical. Find the breadth and the height of the pontoon if floating in fresh water.