A moving coil voltmeter with a resistance of 150 ohms gives a full scale deflection with a potential difference of 100 mV. The coil has an effective depth of 100 mm and a width of 145 mm. The permanent magnetic field has the flux of 45 mWeb with an area of 3mm, and 50 mm. Controlling torque exerted by the spring is 50 x 10-6 Newton-meter. Calculate the number of turns in the moving coil, and also calculate the deflection of the pointer k=2*10-6

A moving coil voltmeter with a resistance of 150 ohms gives a full scale deflection with a potential difference of 100 mV. The coil has an effective depth of 100 mm and a width of 145 mm. The permanent magnetic field has the flux of 45 mWeb with an area of 3mm, and 50 mm. Controlling torque exerted by the spring is 50 x 10-6 Newton-meter. Calculate the number of turns in the moving coil, and also calculate the deflection of the pointer k=2*10-6

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter29: Dc Generators

Section: Chapter Questions

Problem 1PA: You are working as an electrician in a large steel manufacturing plant, and you are in the process...

See similar textbooks

Similar questions

The coil of a moving-coil voltmeter is25 mm long and 25 mm wide and has 60 turns on it. The control spring exerts a torque of 1.58 x 10 Nm when the deflection is 100 divisions on full scale. If the flux density of the magnetic field in the air gap is 5 wb/m², estimate the resistance that must be put in series with the coil to give one volt per division. The resistance of the voltmeter coil may be neglected
A core of annealed steel sheet is wound with 1500 turns of wire through which a current of 4o mA is flowing. If the length of the coil is 20 cm, calculate the magnetic strength is amp-turns per meter.
1. A conductor, 50 mm long, moves a velocity of 2.5 m/s across a magnetic field of 0.9 Wb/m2. What is the voltage generated? 2. A coil of 1000 turns is wound on a torroidal magnetic core having a reluctance of 10^6 AT/Wb. When the coil current is 5A and is increasing at the rate of 200A/s, determine energy stored in the magnetic circuit. Assume coil resistance is zero.
3. The torque applied to move the pointer is 355.6x10-6 N/m-1 and it creates the 0.598 Wbm-2 magnetic field density. The effective depth of the coil has 5.5 cm x 0.131 m with voltage and power consumed by the meter are 26.5V and 288.3mW. If so then, i) calculate the total torque required to stop the pointer over the scale, ii) calculate the total current flow through the coil and resistance, iii) calculate the number of turns of the coil.
A magnetic circuit consists of silicon steel of 3000 permeability and an air gap. The length of the steel core is 10cm and the air gap is 2 cm. Both have the same cross-section of 1.5 sq.cm. A current of 1/4 A flows through the windings to produce 2351 maxwells flux. How many turns are there in the coil? Answer: ______ turns
In a moving coil instrument, the coil has a length of 5 cm, a width of 4 cm and 100 turns. The magnetic flux density in the air gap is 0.2 Wb/m^2. The hair spring provides a controlling torque of 0.5*10^(-7) Nm/degree of the coil. What current will be required to give a deflection of 600 ?
An iron cored toroid of relative permeability 980 has a mean length of 120 cm and core are of 100mm^2. A current of 0.3 A establish a flux of 40microWb, calculate the number of turns of coil, Self-inductance and the energy stored in magnetic field
PLEASE ANSWER IT ASAP FOR AN UPVOTE. THANK YOU. Round off your answer into four decimal places .Box your final answer .Use SI unit. A magnetic circuit consist of silicon having a cross section of 1.5 sq. m and 0.1 m length and an air gap of the same cross section and pf 0.02 m length. what is the field intensity at the air gap if 0.5 A current flows through the 5000-turns coil? Assume the permeability of silicon steel is 3000.
A PMMC instrument has 100 turns on a former that is 20mm wide, length is 30mm. The flux density in the air gap is 0.002 Tesla. The control spring constant is 0.21x10^-6 Nm/rad. Calculate the current required to produce 120 degree.
1. A coil of of 1000 turns wound on a torroidal magnetic core having a reluctance of 10^6AT/Wb. When the coil current is 5A and is increasing at the rate of 200 A/s, determine energy stored in the magnetic circuit. Assume coil resistance is zero.
A PMMC voltmeter with a resistance of 10 ohms gives has a coil of effective depth of 3 mm and a width of 2.5 cm, the coil has about 100 turns. The flux spread in the air gap is of 10mWb/m2 . The spring has a constant of 2 x 10-6. Then calculate, i. Deflection torque produced by the coil, when it is connected to 20V to measure. ii. Deflection made by the pointer, when the meter is to measure a voltage of 10V. iii. Analyze the reason of fixed the voltage coil in dynamo type wattmeter?
In a moving coil instrument, the coil has a length of 5 cm, a width of 4 cm and 100 turns. The magnetic flux density in the air gap is 0.2 Wb/m2. The hair spring provides a controlling torque of 0.5*10-7 Nm/degree deflection of the coil. What current will be requrid to give a deflection of 600 ?