• A rectangular beam has the dimensions b=250mm, h=650mm, and d=600mm and is reinforced with three D25 bars, As=1530mm^2. The specified design strength of concrete fck=28MPA, and the yield strength of the steel fy=420MP.. Determine the nominal strength of the beam. a) Use equilibrium and compatibility b) Use reinforcement ratio and equation for flexural strength

• A rectangular beam has the dimensions b=250mm, h=650mm, and d=600mm and is reinforced with three D25 bars, As=1530mm^2. The specified design strength of concrete fck=28MPA, and the yield strength of the steel fy=420MP.. Determine the nominal strength of the beam. a) Use equilibrium and compatibility b) Use reinforcement ratio and equation for flexural strength

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Principles of Reinforced and Prestressed Concrete If assumptions are made, verify if assumptions are correct. A reinforced rectangular beam with a with of 275 mm and effective depth of 440 mm has 4 16mm bars placed in 1 layer at the tension side. The beam has a stirrup with diameter of 10mm. Use fc'=28MPa and fy=420MPa, L=3.85m, w0=19.25kN/m and wl=24.75kN/m. Calculate the strength reduction factor of the beam.
2.From the figure below; bending moment of 8 KN-m. The normal weight of concrete has an fc' of 26.4 MPa. solve and show the complete solution and pick the correct ans
A rectangular beam has a width of 260 mm and an overall depth of 470 mm. concrete cover is 60 mm from the centroid of bars. Concrete compressive strength f’c = 21 MPa. Steel yield strength fy = 415 MPa for longitudinal bars and 275 MPa for hoops. Determine the shear strength (in N) provided by concrete using the simplified calculation (a) if the beam is subjected to shear and flexure only. _______ (b) if the beam is subjected to axial compression force of 80 KN. ________
Three high-strength concrete poles, with an effective cross- sectional area of 40, 000m * m ^ 2 and a length of 2 m, support a stiff steel plate. The center post is 1 mm shorter than the others before the load P is applied. If the concrete's allowed compressive stress is 20 MPa, calculate the maximum load that can be carried. E = 30GPa for concrete
A rectangular reinforced concrete beam with a width of 260 mm and a total depth of 650 mm with concrete cover of 65 mm is subjected to a service moment of 127 kN-m. The beam is reinforced with 3- 20 mm dia bars. Use f'c = 27.7 MPa and fy = 428 MPa. Use transformed section method. Do the following: (1) Compute the distance of the neutral axis from the top of the beam, (2) Compute the maximum stress of concrete in MPa, (3) Compute the maximum stress of steel in MPa, and (4) Assess the adequacy of the beam design.
A pretensioned prestressed beam has a rectangular cross section of 6 in. width and 20 in. total depth. It is built using normal-density concrete with a specified strength f = 4000 psi and a strength at transfer of f' = 3000 psi. Stress limits are as follows: fi = 164 psi, f. = -1800 psi, f. = 474 psi, and fes = -1800 psi. The effectiveness ratio R may be assumed equal to 0.80. For these conditions, find the initial prestress force P, and eccentricity e to maximize the superimposed load moment My + M, that can be carried without exceeding the stress limits. What uniformly distributed load can be carried on a 30 ft simple span? What tendon profile would you recommend?
A rectangular beam has a width of 285 mm and an effective depth of 520mm. It is reinforced with 4 – 36 mm ø bars having fy = 430 MPa. If he compressivestrength of the concrete is 28MPa, find the following a. Location of the neutral axis from the top of the beam.b. Stress of the steel.c. Ultimate capacity of the beam?
A simply supported slab has a length of 3.5 m. It is topped with 25 mm thick grout (unit weight = 12 KN/cum) and 10 mm tiles (unit weight = 15 KN/cum). The main rebars is 10 mm spaced at 90 mm on centers. Use fy= 276 Mpa, fc’= 21 Mpa and unit weight of concrete is 23.5 KN/cum. Determine the uniform live load capacity of the slab.
A rectangular beam has dimensions of 290 mm by 710 mm with an effective depth of 652 mm and is reinforced with 3- 20 mm ø. Concrete cover is 58 mm. The concrete cylinder strength f’c = 30.8 MPa and the tensile strength in bending is the modulus of rupture. The yield point of the steel is 414.2 MPa. The beam carries a bending moment of 66 kN-m. Use transformed section method to answer the following: (1) Compute the concrete compression stress at the top, (2) Compute the concrete tension stress at the bottom, (3) Compute the stress in the steel. (4) Assess the adequacy of the beam design.
A prestressed rectangular beam 0.50m x 0.75m has a simple span of 10m and is loaded with a uniform load of 45 kN/m including its own weight. The prestressing tendon is 0.225 m from the bottom and produces an effective prestress of 1600 kN. Compute the fiber stress distribution in the concrete at midspan (bottom fiber) due to axial and transverse loading. Select one: a. 3.26 MPa b. 1.96 MPa c. 2.61 MPa d. 4.08 MPa A prestressed rectangular beam 0.50m x 0.75m has a simple span of 10m and is loaded with a uniform load of 45 kN/m including its own weight. The prestressing tendon is 0.225 m from the bottom and produces an effective prestress of 1600 kN. Compute the fiber stress distribution in the concrete at midspan due to transverse load. Select one: a. 15 MPa b. 9 MPa c. 12 MPa d. 7 MPa
A simply supported beam 6.5m long, 350mmx500mm, prestressed with a straight tendon located 150mm below the neutral axis with effective prestressing force, Pe, of 300kN. Total load carried by the beam is 20kN/m. A. Determine the area of the concrete, mm2.B. Determine the section modulus of the concrete in x10^3 mm^3C. Determine the compressive stress caused by the tendon alone if Pe is at the centroid, MPa
A reinforced concrete T-beam has the following properties: Flange width, bf = 1,350 mm Width of web, bw = 300 mm Gross depth, h = 500 mm Effective depth, d = 420 mm Concrete strength, f’c = 21 MPa Steel strength, fy = 415 MPa 10. If the beam is reinforced with 3-20-mm-diameter bars at the bottom (in single layer), determine the resulting depth of rectangular stress block at ultimate stage. = mm (2 decimal places) 11. What is the condition of failure? = (Balanced, Tension controlled, Compression controlled, Transition) 12. Calculate the design moment strength of a typical interior beam. = kN⋅m (whole number)