A segment of rural freeway is being designed for a FFS of 65 mph using 11 ft lanes in a mountainous area. The lateral clearance is nominal (1 ft). The directional (i.e. one-way) design flow rate is expected to be 2,400 passenger cars per hour. How many lanes in one direction will be needed to provide at least a LOS B?

A segment of rural freeway is being designed for a FFS of 65 mph using 11 ft lanes in a mountainous area. The lateral clearance is nominal (1 ft). The directional (i.e. one-way) design flow rate is expected to be 2,400 passenger cars per hour. How many lanes in one direction will be needed to provide at least a LOS B?

Traffic and Highway Engineering

5th Edition

ISBN:9781305156241

Author:Garber, Nicholas J.

Publisher:Garber, Nicholas J.

Chapter9: Capacity And Level Of Service For Highway Segments

Section: Chapter Questions

Problem 8P

See similar textbooks

Similar questions

One segment of a Class I two-lane highway is on rolling terrain and has an hourly volume of 950 veh/h (total for both directions), a directional traffic split of 70/30, and PHF = 0.85, and the traffic stream contains 6% large trucks, 3% buses, and 6% recreational vehicles.
A four-lane urban freeway segment has a peak demand volume of 3,500 vehicles per hour for the two eastbound lanes. The PHF is 0.95 and there are no trucks, buses or RVs because the freeway is classified as a parkway and such vehicles are prohibited. The segment has 12 ft lanes, no lateral obstructions, 3 ramps within the influence area, and meanders through some beautiful rolling terrain. Assuming the road will be used by commuters and those familiar with the road, what is the flow rate (pcphpl)? Provide your answer to the nearest integer.
A six-lane freeway (three lanes in each direction) has regular weekday users and currently operates at maximum LOS C conditions. The lanes are 11 ft wide, the right-side shoulder is 4 ft wide, and there are two ramps within three miles upstream of the segment midpoint and one ramp within three miles downstream of the segment midpoint. The highway is on rolling terrain with 10% large trucks and buses (no recreational vehicles), and the peak-hour factor is 0.90. a.) Determine the Free Flow Speed
A six-lane freeway (three lanes in each direction) has regular weekday users and currently operates at maximum LOS C conditions. The lanes are 3.5m wide, the right-side shoulder is 1.2 m wide, and there are two ramps within three miles upstream of the segment midpoint and one ramp within three miles downstream of the segment midpoint. The highway is on rolling terrain with 10% large trucks and buses (no recreational vehicles), and the peak-hour factor is 0.90. a) Determine the hourly volume for these conditions. b) At one point along this freeway, there is a 4% upgrade with a directional hourly traffic volume of 5000 vehicles. How long can this grade be without the freeway LOS dropping to F?
A freeway is being designed to carry a heavy volume of 5000 veh/h on a regular weekday in rolling terrain. If the PHF is 0.9 and the traffic consists of 90% passenger cars and 10% trucks, determine the number of 12-ft lanes required in each direction if the highway is to operate at level of service C. The free-flow speed is 70 mi/h, there is no lateral obstruction, and interchanges are 3 mi apart.
A six-lane freeway (three lanes in each direction) in rolling terrain has 10-ft lanes and obstructions (fLw = 6.0 mph) 4 ft from the right edge of the traveled pavement (fic = 0.8 mph). There are five ramps within three miles upstream of the segment midpoint and four ramps within three miles downstream of the segment midpoint. A directional peak-hour volume of 2000 vehicles (primarily commuters) is observed, with 600 vehicles arriving in the highest 15-min flow rate period. The traffic stream contains 12% large trucks (ET = 2.5) and buses and 6% recreational vehicles (ER = 2.0). 1.) What is the estimated free-flow speed of the traffic stream in mph (whole number, nearest 5)? 2.) What is the peak-hour factor 3.) What is the heavy-vehicle adjustment factor? 4.) What is the service flow rate? 5.) What is the service measure value if the average speed of the traffic stream is 65 mph
One segment of a Class I two-lane highway is on level terrain and has an hourly volume of 1200 veh/h (total for both directions), a directional traffic split of 50/50, and PHF = 0.92, and the traffic stream contains 5% large trucks, and 2% buses. It has 11-ft lanes, 2-ft shoulders, access frequency of 10 per mile, 50% no-passing zones, and a base FFS of 55 mi/h, determine the level of service for this two-lane highway segment.
A six-lane freeway (three lanes in each direction) in rolling terrain has 10-ft lanes and obstructions (fLW = 6.0 mph) 4 ft from the right edge of the traveled pavement (fLC = 0.8 mph). There are five ramps within three miles upstream of the segment midpoint and four ramps within three miles downstream of the segment midpoint. A directional peak-hour volume of 2000 vehicles (primarily commuters) is observed, with 600 vehicles arriving in the highest 15-min flow rate period. The traffic stream contains 12% large trucks (ET = 2.5) and buses and 6% recreational vehicles (ER = 2.0). What is the estimated free-flow speed of the traffic stream in mph (whole number, nearest 5)? Blank 1 What is the peak-hour factor (3 decimal places)? Blank 2 What is the heavy-vehicle adjustment factor (2 decimal places)? Blank 3 What is the service flow rate (whole number, nearest 5)? Blank 4 What is the service measure value if the average speed of the traffic stream is 65 mph (one decimal place)? Blank 5
A six-lane freeway (three lanes in each direction) in rolling terrain has 10-ft lanes and obstructions (fLW = 6.0 mph) 4 ft from the right edge of the traveled pavement (fLC = 0.8 mph). There are five ramps within three miles upstream of the segment midpoint and four ramps within three miles downstream of the segment midpoint. A directional peak-hour volume of 2000 vehicles (primarily commuters) is observed, with 600 vehicles arriving in the highest 15-min flow rate period. The traffic stream contains 12% large trucks (ET = 2.5) and buses and 6% recreational vehicles (ER = 2.0). What is the estimated free-flow speed of the traffic stream in mph (whole number, nearest 5)? What is the peak-hour factor (3 decimal places)? What is the heavy-vehicle adjustment factor (2 decimal places)? What is the service flow rate (whole number, nearest 5)? What is the service measure value if the average speed of the traffic stream is 65 mph (one decimal place)?
A four-lane rural freeway segment has a 510 m grade length of 2% upgrade followed by a 630 m grade length of 3%. The freeway has 3.4-m lane, 1.5m left-shoulder lateral clearances and interchanges spaced at every 25 km. During the peak hour, there are 6% trucks, 2% buses, 2% recreational vehicles and the rest are passenger cars. Driver population adjustment is determined to be 0.90, peak hour factor is 0.90 and the BFFS is 110 km/h. At present, the freeway operates at capacity during the peak hour in the direction in question. If an additional 3.4 m lane is introduced, and all other factors stay the same, what will be the new level of service?
The C-5 Southlane Freeway/Expressway having 6 lanes (three lanes in each direction) is 3.6m wide per lane and has an edge distance of 2 m to the nearest obstruction. A total of 26 on-or off-ramps within the 40 km span, from which 3 ramps are located within 5 km upstream and 4 ramps within 5 km downstream from the midpoint of the analysis segment can be observed. Determine the free-flow speed of the existing freeway, in kph. Do not round-off your FFS
Andoks highway can accommodate speed of 80 kph under free-flowing conditions. On average, front bumper-to-bumper spacing of 1.58m is occuring on the highway such that the flow stops completely. Determine the flow of traffic on Andoks Highway if the average speed of the vehicles is 28 kph.